ASUS P8P67 Pro/Evo/Deluxe OC discussion thread

[Sam_oslo]

Flashed to 1305 Bios, any recommended settings for my configuration? Quick LinX test

Ati Overclock: Manual
BLCK: 100.0
Turbo Ratio: Ratio by all Cores
CPU Ratio: 46
Internal PLL Overvoltage: Auto
Memory Frequency: DDR3-1600MHz (8-8-8-24)
EPU Power Saving Mode: Disabled

Load-Line Calibration: Extreme
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
Current Capability = 100%

CPU Voltage: 1.32
DRAM Voltage: 1.65
Vccsa: Auto
Vccio: Auto
PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Auto

http://i51.tinypic.com/xqmbdd.jpg[/IMG]

You should keep the DRAM Voltage: 1.50v for 24/7 to stay on safe side. That's what Intel recommends. Or at least keep it under 1.55v.

Your RAM-performance is probably an overkill anyways, and it's better to go down on RAM speed/voltage to keep the CPU/IMC on the safe side.
At least until we know more about the long term effect of high vDIMM.

And these:
Vccsa: Auto
Vccio: Auto
PLL Voltage: Auto
PCH Voltage: Auto
I type inn my own values manually, mostly default values, because some of them can change sometimes, maybe a bit too much, on Auto. But that's not a big deal anyways.