hey poke, looks like your package is scheduladed to be there on wed. hope you enjoy it...

you will see when you get it that the power demands are a bit big. you need 5 power connectors for it to run. you need 1 24pin atx, 1 4pin molex, 2-8pin power, and 1-4pin power as well. the easiest way i found to hook it up was for one of the 8 pin, to use a 4 to 8 pin adapter, ive sent one with it. its been running at 100% load for the last 14 months like that with no problems now for the last 4 pin, use a pic-e and hook it up backwards. if you need a better explination, call me and ill talk you through it. but what you do is take the pci-e and go to hook it up normaly where the latch on it hooks on the board, flip it around so the latch is on the other side 180 degrees, and let the first pair of connectors hang over the side of the mobo, and give it a little pressure it will fit in nicely. to make sure its right, look at the 2 8pins and where the yellow pos12v is the pcie should have its 12pos on the same side .