vmod voids warranty, at your own risk
pictures courtesy of kinc!
you can bench with the backplate as a stiffener and a backing for the pwm, i just used vaseline front and back of card, fit in Tek 9 Kingpin pot, one layer of paper towel on card's back, fit in backplate of vga, screw the 4 nuts of tek 9 securely. then once backplate is in place, screw on the pwm black heatsink.
and just use the same cold slow bios
http://www.mediafire.com/?v96181899fv79f3
Reply With Quote
Bookmarks