[Bundymania User Review] Mora 2 / Mora 3 / Phobya Nova 1080 !

[Martinm210]

In my experience with rad testing, it doesn't matter what the ambient temperature is...as long as it's remaining constant. A slight rise or decline in ambients is what causes problems not the actual ambient.

Buddy notes that he ran the benchmarks for 60 minutes before measurements. That should be good enough for 20C deltas and lower. The higher the delta the longer it takes as you would expect, but an hour seemed to work pretty well in my experience as well.

Only thing I would do is run my first test for a couple of hours until the room ambient rise flattens out then start testing. Rad testing is tedious and extremely time consuming. I could easily waste a weekend on one radiator.