Gigabyte P67a-UD3 vcore drop...

[dinos22]

hey guys

can you compare the difference in droop from LLC enabled to LLC Disabled please

i will report to bios team once thats up and running!

Dino

[Charloz24]

hey guys

can you compare the difference in droop from LLC enabled to LLC Disabled please

i will report to bios team once thats up and running!

Dino

Ok no problem here are my results:

I have 2 identical rigs (P67a-UD3 + 2600K) and both overclock to the same frequency and the same voltage, and both vdroop a lot.

In bios:

48X 100 bclk
vcore: normal, Dvid + 0.150V (gives 1.46V in Bios monitoring)
C1E,C3/C6 EIST are enabled (it helped a little bit)

so ET6 monitoring while f@h 100% usage

LLC enbled: give 1.404V
LLC Disabled: 1.380V
LLC auto: 1.380V

I can't tell idle voltage on ET6 because on idle it goes at 1.0V because of power saving feature, but in Bios it give 1.46V.


Hope it helps!

[dinos22]

can you do the settings the way i suggest them here it will not drop frequency in windows and then compare LLC on and off

http://www.youtube.com/watch?v=8ngyUrjuQ80&hd=1

[Charloz24]

can you do the settings the way i suggest them here it will not drop frequency in windows and then compare LLC on and off

http://www.youtube.com/watch?v=8ngyUrjuQ80&hd=1

Ok done:

48X100 1.470Vcore in Bios, LLC enabled( just enabled or disabled in UD3) , 1.452V idle/ 1.404V load

LLC disabled 1.452C idle / 1.380V load