Quote Originally Posted by sparkY1000 View Post
I have a similar issue driving 4 sticks of RAM.

I have had all 4 sticks in the system individually and ran 5-6 passes of Memtest 86 on each module and each module passes I put all 4 sticks in and run memtest again and it falls over inside about 15mins.

I am currently testing each set (2 sticks) but I believe its either the CPU IMC or the board. I have tested all 4 slots and none some to have any problems its just when I try to push all 4 slots.

This is with 2 lots of 2x2Gb Corsair XMS3 1600C9 at stock! Using XMP profiles to set voltage. Can I do anything to help the chips IMC? Bump a voltage slightly?

This is a work PC so dont really want to have to play with voltages to get it to run.
This is Exactly the problem I am trying to Avoid. I want to push a decent 24/7 OC, 4.7ghz on air, but I would also like to run 16gb as it would make some of the editting etc, I do on occaision much smoother.
Do you think using These dimms would make a difference, as 1.35v at 1600 would stress the IMC less no?