Quote Originally Posted by Quad-Damage View Post
I'm having issues with getting my ram to run at 1600mhz

I have 8 GB of ADATA 1600mhz

http://www.newegg.com/Product/Produc...82E16820211409

I have it set to 1600mhz in Bios and have giving it 1.55 volts

It's still reading at 1066mhz in cpuz

I do have the timings set to auto just raised the volts hopping it would get the correct settings.

Can someone post there info for 4.8 4.9ghz range on the Deluxe
I have a similar issue driving 4 sticks of RAM.

I have had all 4 sticks in the system individually and ran 5-6 passes of Memtest 86 on each module and each module passes I put all 4 sticks in and run memtest again and it falls over inside about 15mins.

I am currently testing each set (2 sticks) but I believe its either the CPU IMC or the board. I have tested all 4 slots and none some to have any problems its just when I try to push all 4 slots.

This is with 2 lots of 2x2Gb Corsair XMS3 1600C9 at stock! Using XMP profiles to set voltage. Can I do anything to help the chips IMC? Bump a voltage slightly?

This is a work PC so dont really want to have to play with voltages to get it to run.