Quote Originally Posted by ugotd8 View Post
Nice nice nice !!!!

Can u pass Linx with that setup ? Care to share some settings ? I'm at 4.8 at the same voltage and slightly higher temps.
I haven't stressed with Prime95/LinX yet... but most likely it will need a couple bumps vcore increase. I was using vcore "offset" +100, DRAM at 1600 9-9-9-24 @1.625v all other voltages set to default. BIOS PLL voltage overide set to enabled.

Quote Originally Posted by flesheatinvirus View Post
This is batch L040B208 2600K at 5G at 1.370v bios with level1 Load-Line Cal enabled. This is in my torture rack case which has twin remote rad cooling loops. Prime95 blend was ran for a little over 4 hours at 1.370 v core/1080 QPI/VTT smooth as silk. RealTemp readings are correct with EasyTune6 showing slightly higher.
L040B208 with 1.37v load for Prime @ 5GHz is looking very good! How much vcore does your other chip L042B208 need for 5GHz?