Alien Grey i took your advise about ram settings and now here is my best 460fsb settings:

Ai Overclock Tuner [Manual]
CPU Ratio Setting [9.0]
FSB Strap to North Bridge [Auto]
FSB Frequency [460MHz]
PCIE Frequency [100MHz]

DRAM Frequency [1226MHz]
DRAM Command Rate [2N]
DRAM CLK Skew on Channel A [Auto]
DRAM CLK Skew on Channel B [Auto]
DRAM TimingControl [Manual]
1st Information : 5 - 5 - 5 - 15 - 5 - 52 - 12 - 6
2nd Information : 8 - 6 - 6 - 4 - 7 - 4 - 7
3rd Information : 23 - 8 - 1 - 6 - 6
Refresh Period [16120T]
DRAM Static Read Control [Disabled]
Ai Clock Twister [Lighter]
Ai Transaction Booster [Manual]
Common Performance Level [06]
Pull-In of CH A/B all disabled

CPU Voltage [1.31875V] real 1.304Vload, 1.29Vidle
CPU PLL Voltage [1.50V]
North Bridge Voltage [1.41V] real 1.392V
DRAM Voltage [2.00V]
FSB Termination Voltage [1.28V] real 1.184V
South Bridge Voltage [1.05V]
SB 1.5V Voltage [1.50V]
Loadline Calibration [Enable]
CPU GTL Voltage Reference [0.62X]
NB GTL Voltage Reference [0.67X]
DRAM Controller Voltage REF [Auto]
DRAM Channel A/B Voltage REF [Auto]

CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
CPU Clock Skew [Delay 300ps]
NB Clock Skew [Delay 200ps]

What i said about skews was bs. The problem i have with l2 cache has to do with my corrupted os. I did some benches with my backup win7-harddrive and i got the right numbers