Quote Originally Posted by crazydiamond View Post
just have to get used to chIV overvolting so much what is your water set up? i was able to run 1.56v @ load with temps around 55-56c but i have 3x120 worth of very high fpi rads with some 100+cfm fans on them to keep those temps. x6 gets much hotter than x4 with same volts, but is usually able to get higher freq with same volts
Thanks...figured out a way to get things under control. The Asus turbo V software really helped.

I run 1x360 BIX and 1x120 XSPC all on Sythe GT 1850's. But it obviously is still not enough to hold 1.5v plus. The below run topped out at around 52 degrees on the core. Whats the safe temp for AMD these days?? My ambients are around 23-25 degrees.

Here's where I am . 3 hours prime 4.06 ghz. Set to 1.385v in bios. With load line went to 1.41v in CPUZ. CPU NB at 2.7 and ram at 1800 CL8



Next up 4.2 Ghz.

Without load line, the board tends to under volt a lot and that kills stability.