Quote Originally Posted by nightwoodwolf View Post
i used both 105 and the latest 1102 ? i tried several settings

20x200 / vcore 1.28v / qpi 130 to 135v / DRAM Bus 1.64v - to 16525v / Ram freq i tried 1450, 1550, 1600 all didnt work ... LLC enabled and disabled didnt work

i also tried different multipliers by BCLK to get the 4.0Ghz it didnt work !!

should i restore the original BIOS ? (9xx)

i just dont understand i was easily and comfortably moving from stock to 3.8Ghz ti 4.0Ghz to 4.2Ghz with my previous build !!
QPI is too low for high BCLK. try 1.4-1.45.
Also turn on QPI LLC via jumper next to ATX24 pin connector.