This is where i am at for 3.8 atm:-

AI Overclock tuner: Manual
CPU Ratio Setting: 9
FSB Frequency: 420
PCI-E Frequency: 101
FSB Strap to North Bridge: auto
DRAM Frequency: 1009
DRAM CLK Skew Channel A1: auto
DRAM CLK Skew Channel A2: auto
DRAM CLK Skew Channel B1: auto
DRAM CLK Skew Channel B2: auto
DRAM Timing Control: manual
1st Information
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 15
RAS# to RAS# delay auto
Row Refesh Cycle time 55
Write Recovery Time auto
Read to Precharge Time auto


DRAM Static Read Control: disabled
DRAM Read Training: disabled
MEM. OC Charger: auto
AI Clock Twister: auto
AI Transaction Booster: manual
Common Performance Level 13

CPU Voltage: 1.36875
CPU GTL Voltage Ref(0/2) auto
CPU GTL Voltage Ref(1/3) auto
CPU PLL Voltage: 1.5
FSB Termination Voltage: 1.2
DRAM Voltage: 2.1
NB Voltage: 1.26
NB GTL Reference: auto
SBridge Voltage: 1.1
PCIE SATA Voltage: 1.5

Load Line Calibration: enabled
CPU Spread Spectrum: disabled
PCIE Spread Spectrum: disabled
CPU Clock Skew auto
NB Clock Skew auto
CPU Margin Enhancement Optimized


Advance CPU Settings
CPU Ratio Setting: 9
CPU VID: default
C1E Suppport: disabled
Max CPUID Value Limit: disabled
Intel® Virtualization Tech: disabled
CPU TM Function: disabled
Execute Disable Bit: disabled