Quote Originally Posted by punx223 View Post
sounds like something went wrong when installing the block.

how many beeps do you get?

have you tried the gpu in other slots? it can boot in any of the 7 slots....

also try a single stick of ram in red slot in bank below CPU0 single cpu in taht socket..... also make sure no pins bent in cpu socket.

do you have 8 pin in for each cpu?

unplug all peripherals from board and run with just board sitting on box or non conductive surface.
Yes something is wrong how and when I don't know, I've installed MB blocks more than once but we can all make mistakes. I've cheked to see if I forgot something or didn't put on all the spacers or if the MB where under any stress due to over tightning screws but everything lokked fine, all screws had there silicon washers and all spacers where in place.

I get four beeps when on post code 2E.

Yes I,ve tried all of them with different GPU's

Tried single stick of ram, one CPU etc

Yes 8 pin for both CPU's

Tried with nothing connetcted even without GPU.

All testing last night where preformed on a box.