3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

[websmile]

guys

anyone bought a single stick from ewiz of the stalents 2200 CL8 ?

this are back in stock
http://www.ewiz.com/detail.php?name=WS220UB2G8&show=p

i just want to know if they are the dark PCB as my 2x2 or green PCB

cheers
Sergio

Bad news for you- you have to depend on your luck- one of the two single sticks I bought was black, the other one green- good news is they worked perfectly together- 1134 Cl8-8-8-24@ 1,65V

[andressergio]

Bad news for you- you have to depend on your luck- one of the two single sticks I bought was black, the other one green- good news is they worked perfectly together- 1134 Cl8-8-8-24@ 1,65V

no worries i bought 2 black PCB one for me and for my mate perfect same as my 2x2 KIT not there tough

[Shiranui Gen-An]

Just received my replacement WX200UX6G7 kit from RMA. Haven't decided if I'll keep it or not.

[BeepBeep2]

Just received my replacement WX200UX6G7 kit from RMA. Haven't decided if I'll keep it or not.

I'm afraid to hear what happened to the first kit

[geobot24]

Few days ago, i recieved 3 dimms supertalent 2133c8.

What i would expecting to do? Thanks..

[Hondacity]

1077 7-7-7 1.7x volts ...

[geobot24]

Could it be possible something like, 1050 7-7-7 with an 920 (210 bckl) and everything on air, stable at spi 32M?

Sorry for the "noobish" question but i need some encourage before starting tests...

[websmile]

1077 7-7-7 1.7x volts ...

Very bold plan, General Custer- I hope this doen´t end up in desaster

Could it be possible something like, 1050 7-7-7 with an 920 (210 bckl) and everything on air, stable at spi 32M?

Sorry for the "noobish" question but i need some encourage before starting tests...

Depends on your board, the IMC and particularly on the quality of the sticks, means luck- if you are lucky 1050 could run at less than 1,8V, tests will show- good luck for that

[Blue Storm]

some off topic question...does have this Super Talent kit Hyper IC's? http://www.superbiiz.com/detail.php?...oLSper0v8z1cN6 thanks for answers

[radaja]

some off topic question...does have this Super Talent kit Hyper IC's? http://www.superbiiz.com/detail.php?...oLSper0v8z1cN6 thanks for answers

99.9999% hyper MGH-E's

[geobot24]

Depends on your board, the IMC and particularly on the quality of the sticks, means luck- if you are lucky 1050 could run at less than 1,8V, tests will show- good luck for that

At first tests, my 3x2gb 2133c8 can do spi32m 2000mhz 8-8-8-24 with 1.65 vmem
and +200vtt at classified 760 (bios 74).

I dont know if this is something promicious, but i want more tight timings...

[Shiranui Gen-An]

In my experience STT sticks need a lot of VDIMM for 2000 C7, like 1.70V+. Something like 2100 C7 is gonna take a crazy amount...

[Blue Storm]

99.9999% hyper MGH-E's

thanks very muchso instead of Corsair Dominator GT 2000MHz 8-9-8-24, I will take these Super Talent

[BeepBeep2]

In my experience STT sticks need a lot of VDIMM for 2000 C7, like 1.70V+. Something like 2100 C7 is gonna take a crazy amount...

I'm trying to get my hands on a Phenom II 1090T so I can test 2000 C7 on these 2000C7 sticks.

I've gotten 1880 6-6-6-15 validated through CPU-Z @ 1.75v...

[Barr3l Rid3r]

I'm trying to get my hands on a Phenom II 1090T so I can test 2000 C7 on these 2000C7 sticks.

I've gotten 1880 6-6-6-15 validated through CPU-Z @ 1.75v...

VERY NICE i ORDERED SOME OF THOS ALSO...

[websmile]

In my experience STT sticks need a lot of VDIMM for 2000 C7, like 1.70V+. Something like 2100 C7 is gonna take a crazy amount...

Wouldn´t be so sure about that- maybe you just had bad luck- my 1000 C7 need a lot less V than the 2200 C8 and the 2133 C8 I had at 2000 Cas7- here´s an example, just picked two of my sticks and tried it, these are not my best ones- and my board is not known for being a good C7 clocker, its much better at C8 and 9- for comparison, I had two 2GB sticks kingston here a few weeks ago, they needed 1,7V with higher TRFC and lots of tuning

[OCBalmang]

i was wondering, and choosing a new set of RAM for my EP45T-USB3P, i need ot know which of the linked models have elpida hypers and how i would know for future purchases what have hypers and don't.(also which is the better buy)

is it the UX in the model number that determines its an elpida hyper?

link 1 http://www.superbiiz.com/detail.php?...nel-Memory-Kit

link 2 http://www.superbiiz.com/detail.php?...nel-Memory-kit

link 3 https://www.superbiiz.com/detail.php...nel-Memory-Kit

[radaja]

all of the ones you posted are hypers
all supertalent 2000+ with timings of 7-7-7 or 8-8-8 are 100% hypers

[NoGuru]

Feels good to finally use mine after owning them for months. Very, very limited on time so have not tested as much as I would like to yet but so
far I have gotten 7-7-7-20 @ 1700 with 1.66

[andressergio]

Feels good to finally use mine after owning them for months. Very, very limited on time so have not tested as much as I would like to yet but so
far I have gotten 7-7-7-20 @ 1700 with 1.66

very nice my friend

[OCBalmang]

i order myself a EP45T-USB3P by gigabyte and The VERY last NO MORE in stock BLACK pcb Super Talent DDR3-2200 4GB(2X2G) CL8 Dual Channel Memory kit - WS220UX4G8
410$$ for the whole deal they even discounted me the motherboard =D VERY VERY HAPPY will tell you my results im going for a 1600-6-6-6-18 ill tell you how low voltage it stablizes out at =D!

[OCBalmang]

They came in but i have no time for testing but i had to brag, i pulled the heat spreaders up gently looking in and there ELPIDA MGH-E =D, ALSO Black PCB
2200 2GBx2 Cas8 8-8-8-24
Sorry about quality used old webcam but shows my beauties!


Surprised i could get a good shot this close



should have results when im done mounting the Heatsink on the new DDR3 mobo, soon!

[Cele303]

Wouldn´t be so sure about that- maybe you just had bad luck- my 1000 C7 need a lot less V than the 2200 C8 and the 2133 C8 I had at 2000 Cas7- here´s an example, just picked two of my sticks and tried it, these are not my best ones- and my board is not known for being a good C7 clocker, its much better at C8 and 9- for comparison, I had two 2GB sticks kingston here a few weeks ago, they needed 1,7V with higher TRFC and lots of tuning

Hey websmile, nice job, did you try triple channel with your best chips?

I was reading this thread and DDR3 24/7 list thread and decided to buy 2000 C7, what can I expect from them (in best and worst case scenario)? Are they (overall) better than my GT's?

Fresh out of the box so far

[Shiranui Gen-An]

They might be a little bit better than the 1866C7 GTs, but the STT 2000 C7 kit I have isn't anywhere near as good as my 2000C8 GTs.

[Barr3l Rid3r]

They might be a little bit better than the 1866C7 GTs, but the STT 2000 C7 kit I have isn't anywhere near as good as my 2000C8 GTs.

Actually mine 2200 C8 was much better than my GT 2000 C8, and 2000 C7 are supposed to be better than 2200C8 , but I think its a matter of luck.