I keep watching this thread, Im hoping to eventually see some of these products (namely the cases) put into production.
Mick64's case is ideal for what I need in a case
I keep watching this thread, Im hoping to eventually see some of these products (namely the cases) put into production.
Mick64's case is ideal for what I need in a case
IncomingOriginally Posted by eppopipe
vuuuu
Thats awesome
keep up the pics of progress
Emir, thats awesome, but that block is so crying out for an acrylic top to show off all that intricate channel work!
I7 920 at 4.0ghz - EK Supreme HF
P6T Deluxe V2 Mobo - EK Mosfet & EK NB/SB
6gb Corsair 1600mhz RAM
Zotac 470GTX - EK FC
2x 60gb OCZ Vertex 2 RAID 0
140mm External Rad Stands Available Here
In development.
I7 920 at 4.0ghz - EK Supreme HF
P6T Deluxe V2 Mobo - EK Mosfet & EK NB/SB
6gb Corsair 1600mhz RAM
Zotac 470GTX - EK FC
2x 60gb OCZ Vertex 2 RAID 0
140mm External Rad Stands Available Here
Good renders there Mudgy...
Id have to agree with Mudgy as well Emir... need to show off that channel work! ;P
i7 920 D0 @ 4.01ghz 1.25v
Rampage III Extreme
24gb Corsair Vengeance @ 1600mhz 8-8-8-24-1T
eVGA GTX 1070 Founders Edition
Silverstone 1000w
Corsair 800D
Liquid Cooled - CPU/MB - EKWB Supreme HF/Full Cover MBWB, Iandh 225 res, D5 w/XTOP rev. 2, Feser x-changer 360, Bitspower fittings
Mudgy
I've a friend that can shot blast or polish then anodize it for you
Hi Tetra, the plan was to get the pieces anodised before laser/water jet so I get that nice silver edge, however nobody stocks big sheets of black, only silver. The next step is to find out who does the silver sheets and see if they can do black. This all has to be done pretty economicaly and it already sounds like that I am going to have to get these cases in batches larger than 10 to make it worth the outlay. I am currently researching into lighting acrylic/perspex to see how much extra this idea would cost to implement.
Whats the size limit on what your friend can anodize?
I7 920 at 4.0ghz - EK Supreme HF
P6T Deluxe V2 Mobo - EK Mosfet & EK NB/SB
6gb Corsair 1600mhz RAM
Zotac 470GTX - EK FC
2x 60gb OCZ Vertex 2 RAID 0
140mm External Rad Stands Available Here
Mudgey that render / design is pretty sweet!
with the red highlights it now looks like the original batmobile!
X2k
The comments above are in no way endorsed by the management, the poster or any sane, rational, intelligent entity. Any complaints or offence arising from said comments can please refer to Avatar <
vuuuu
Nice render Emir, looks great
“Little expense had been spared to create the impression that no expense had been spared.” - Hitchhiker's GuideMondays:It's better to ask dumb questions now, than to look stupid later
Thanks Alex! I wish more users share renders here, like the old days.
vuuuu
I rarely render things nowadays, way too busy actually building the designs I make.
“Little expense had been spared to create the impression that no expense had been spared.” - Hitchhiker's GuideMondays:It's better to ask dumb questions now, than to look stupid later
Wow, these renders are so real looking.
/_/_/_ | Intel Core i7 920 @ 4.2GHz | Swiftech Apogee GTZ | Gigabyte EX58-UD5 | CORSAIR DOMINATOR 6GB DDR3 1600 | 2 x ATI 4850 Crossfire Enabled | WD Velociraptor 300GB | Creative Sound Blaster X-Fi Titanium Fatal1ty Pro | Corsair HX1000W | Antec P182 | _\_\_\
Hi guys
High pressure DDC Top
Don't you mean 'explosive pressure'?
Great looking designs QQHeaD.
“Little expense had been spared to create the impression that no expense had been spared.” - Hitchhiker's GuideMondays:It's better to ask dumb questions now, than to look stupid later
Just 1 small problem with that top, the flow would come to a dead stop at the third pump due to the outlet being in the wrong spot and angle. Run the flow (from pump to pump) in the opposite direction and it'll be fine
Last edited by Waterlogged; 08-05-2011 at 08:40 PM.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
Yes, you're right. I was too lazy to redo everything.
Its not liquid cooling, sorry for off top
Uppcomming project. My first renders. Could use some advice on settings and stuff.
(each render took about 2hrs~, not the best settings)
You guys kill me all the time I view this thread. Beautiful work guys just amazing.
I was working on doing a mod for my Banchetto 101 benchcase and did a few test rendered images. The renderings are not as good as you guys here but nice enough as a quick render.
SketchUp 8 Pro; Kerkytha 2008; Photoshop
Here are a few test renders of the DangerDen Res in a few positions I was testing.
I got a little artsy-fartsy on the last image, anyway I hope you like.
Merry Christmas everybody!!!
Scooby
Asus Rampage II Extreme X58 | Intel i7 920 D0 | Corsair Dominator GT CMG6GX3M3A2000C8 (6 x 2GB) | XFX Radeon HD 6990 4GB DDR5 | Pioneer BDC-2202B Blu-Ray
Western Digital VelciRaptor 300GB | Seagate Barracuda 7200.12 1TB (x4) | Creative Sound Blaster X-Fi Titanium Fatality | PC Power & Cooling, SILENCER 910
Microcool Banchetto 101, Bench Case | Thermalright TRUE Copper, Scythe Gentle Typhoon 120mm (x2) | Samsung 245T 24" (x3), Samsung LN46B650 46" HD LCD HDTV
Bose Acoustimass 25 series II | Logitech G15, Logitech G9 | Lamptron FC-2 Fan Controller | Ergotron DS100 Tri-Stand | Thermaltake ST0005U BlacX Docking Station (x2) | Windows 7 Home 64Bit
Vey nice Scooby!
Would love to see what your Banchetto 102 ends up looking like as I love the Banchetto case.
Please PM me when it's done.
System:1
Banchetto
I7 860 4.2Ghz | Asus Maximus III Formula | EVGA 2 GTX295's | 4Gb (2x2Gb) Dominator GT Ram @ 2000 8-9-8-24-1T | OCZ RevoDrive3 120Gb SSD | Barracuda 500Gb HDD
W/C System
Apogee XT | EK-FC285 Nickel| Thermochill PA 120.3 | TFC Xtender Shrouds |DD Monsoon Premium D5 Dual Bay Reservoir | MCP655-B|Noctua NF-P12| HydrX | B*P Compression Fittings
System:2
Sunbeamtech Ultra-Tech Station
I7 875K 4.4Ghz | EVGA P55 LE | PNY Quadro FX4800 | 4Gb (2x2Gb) Dominator Ram @ 1600 8-8-8-24-2T | 2 OCZ Vertex2 60Gb SSD RAID 0 | Barracuda 500Gb HDD
W/C System
Apogee XT | DD Koosah | 2 Thermochill PA 120.1 | TFC Xtender Shrouds | EK-DDC X-RES 100 | MCP350 | Noctua NF-P12 | Indigo Xtreme | HydrX | B*P Compression Fittings
System Videos
Posting Permissions
Reply With Quote
Bookmarks