@zoomee : not cpunb , but NB voltage . alter that by 0.1 and test .
bingo13 , hope you get back to us soon with a beta bios![]()
@zoomee : not cpunb , but NB voltage . alter that by 0.1 and test .
bingo13 , hope you get back to us soon with a beta bios![]()
Main rig 1: Corsair Carbide 400R 4x120mm Papst 4412GL - 1x120mm Noctua NF-12P -!- PC Power&Cooling Silencer MK III 750W Semi-Passive PSU -!- Gigabyte Z97X-UD5H -!- Intel i7 4790K -!- Swiftech H220 pull 2x Papst 4412 F/2GP -!- 4x4gb Crucial Ballistix Tactical 1866Mhz CAS9 1.5V (D9PFJ) -!- 1Tb Samsung 840 EVO SSD -!- AMD RX 480 to come -!- Windows 10 pro x64 -!- Samsung S27A850D 27" + Samsung 2443BW 24" -!- Sennheiser HD590 -!- Logitech G19 -!- Microsoft Sidewinder Mouse -!- Fragpedal -!- Eaton Ellipse MAX 1500 UPS .
Just tried upping the NB by one notch, then by two notchs from 1.3 - same thing - BSOD :-(
zoomee: Did you try setting your RAM timings manually?
They may have made changes with Auto Mem timings....
AMD FX-8350 (1237 PGN) | Asus Crosshair V Formula (bios 1703) | G.Skill 2133 CL9 @ 2230 9-11-10 | Sapphire HD 6870 | Samsung 830 128Gb SSD / 2 WD 1Tb Black SATA3 storage | Corsair TX750 PSU
Watercooled ST 120.3 & TC 120.1 / MCP35X XSPC Top / Apogee HD Block | WIN7 64 Bit HP | Corsair 800D Obsidian Case
First Computer: Commodore Vic 20 (circa 1981).
Hey~ wonder if anyone else got weird temp reading from CPUID Hardware Monitor for C4F...
It shows TMPIN2 - 128C
I always use DOCP - so it automatically puts in most of the correct entries - apart from trc which I always have to change.
All the other memory settings are just way to complicated - other than the usual 9-9-9-24-41-2T and volt settings which seem to be set ok.
I did a dry run yesterday just to make sure it was all working ok at stock settings - Prime ran for like 20 hours + - lol - seeing my CPU running at 41Degrees C under full load was hilarious (stock 3.x setting) - as I'm used to it hitting 60Degrees C @ 4Ghz/1.46v!
dissapointed now as no more overclocking for me until a new bios is out - its either 4Ghz or bust!![]()
Bingo13 is probably going to come in tomorrow and say : "End of next week!" .
j/k![]()
Main rig 1: Corsair Carbide 400R 4x120mm Papst 4412GL - 1x120mm Noctua NF-12P -!- PC Power&Cooling Silencer MK III 750W Semi-Passive PSU -!- Gigabyte Z97X-UD5H -!- Intel i7 4790K -!- Swiftech H220 pull 2x Papst 4412 F/2GP -!- 4x4gb Crucial Ballistix Tactical 1866Mhz CAS9 1.5V (D9PFJ) -!- 1Tb Samsung 840 EVO SSD -!- AMD RX 480 to come -!- Windows 10 pro x64 -!- Samsung S27A850D 27" + Samsung 2443BW 24" -!- Sennheiser HD590 -!- Logitech G19 -!- Microsoft Sidewinder Mouse -!- Fragpedal -!- Eaton Ellipse MAX 1500 UPS .
ftp://ftp.asus.com.tw/pub/ASUS/mb/so...-ASUS-1606.zip
1606 is out among others
08/24/10 build date.
Last edited by diddi35; 09-03-2010 at 12:54 AM.
Hope their is a beta for the M3NHT Deluxe Mobo. I cannot change any CPU voltage settings or anything on my 1055T. I also get a 0X101 BSOD as well random freezing while playing games. Never had this with my 940BE, hopefully the issues will be resolved soon please Asus.
No point in releasing a new Ch4F bios if there are known critical bugs in it, right?
I for one rather wait for a proper release - still beta though
If i get really bored/inpatient i could try to import newer agesa & updated roms myself into 1005, but naaah....
Last edited by nex_73; 09-03-2010 at 01:41 AM.
My stuff
PhII x6 1055T @ 4.2GHz | Corsair H50 + Scythe SL12SH PnP | Asus Crosshair IV F | 4GB Dominator 1600 CL8 | Corsair HX520W | CM HAF932 | Dell 2405FPW | Creative 5.1 THX |
my gskill flare can not run on ASUS M4A87TD/USB3 , but it can run when i press the memoryOK switch. Should i update the official BIOS to beta BIOS?
BIOS isn't beta as ASUS made it official (even though some don't like it) and overclocking (at least with a 965 and a 1055T) is more stable, as for real critical bugs (like system not booting at all) I'm sure people will complaint
Anyway, latest new BIOS are:
ASUS M4A87TD EVO 1005
ASUS M4A89TD Pro USB3 1006
ASUS M4A87TD USB3 1005
ASUS M4A87TD 1005
ASUS M4A89GTD Pro USB3 1606
Call them whatever you want or wait a couple of days for them to appear on the official motherboard downloads page :P
Last edited by birdiex; 09-03-2010 at 04:56 AM.
The BIOS are under ftp://ftp.asus.com.tw/pub/ASUS/mb/ if not already mirrored to ftp://ftp.asus.com/pub/ASUS/mb/
My stuff
PhII x6 1055T @ 4.2GHz | Corsair H50 + Scythe SL12SH PnP | Asus Crosshair IV F | 4GB Dominator 1600 CL8 | Corsair HX520W | CM HAF932 | Dell 2405FPW | Creative 5.1 THX |
If they aren't done with all features 1005 may be a transition BIOS, if there's a new BIOS in 7-14 days you might as well skip it, if you have a X6 you will probably be more tempted to try it
Well since there has been no news lately on the M3N series boards I guess mine is garbage then. Too bad it has been a good Mobo, guess I will have to buy an AM3 board what do you guys recommend. 980A any better since I have TRI SLI 260's
Just saw 1606 bios for M4A89GTD PRO USB3 on the asus ftp, what's new?
It can't be as bad as 1605 thats for sure!!!
Thanks Asus -
Priming now on 1606 as I type this!
Seems more stable and reliable than the last one and for the first time EVER - this bios has correctly picked up ALL my RAM settings (including correct trc)- yay
PC Probe reported various jumps in Vcore on 1605 - whereas on this one it seems more stable like the older BIOS's
Also noted that the FSB stays more around the 200Mhz mark instead of jumping slightly.
So far tis all good- Will report back if I can run 24hours prime stable again
![]()
Last edited by zoomee; 09-03-2010 at 02:04 PM.
Any M3N-HT love? its been like 3 months![]()
NZXT Tempest | Corsair 1000W
Creative X-FI Titanium Fatal1ty Pro
Intel i7 2500K Corsair H100
PNY GTX 470 SLi (700 / 1400 / 1731 / 950mv)
Asus P8Z68-V Pro
Kingston HyperX PC3-10700 (4x4096MB)(9-9-9-28 @ 1600mhz @ 1.5v)
Heatware: 13-0-0
Bookmarks