Quote Originally Posted by cstkl1 View Post
ure serious right
normally vdimm to vdimm of a 1156 and a 1366 are around 200mhz off.

anyway here is some dom Gt's hypers 2k c7's that does on 1366 at 1.62v at 7-7-7-20
and does 1800 6-6-6-18 at 1.64v
trust me a 2200mhz CL8 1156's are same as a 2k C8 hypers 1366's

the 2k c7's can do more than 2200mhz anytime on a 1156's

here are some norms for hypers under 1366
7-7-7-20 ( april revisions) do them easily with the same voltage as the 7-8-7-20 but will hit a scaling wall at 2100mhz
7-8-7-20/7-7-7-20 2000mhz CL7's will do 1600 6-6-6-18,1866 7-7-7-20/7-8-7-20, 2000 8-8-8-24 at exactly 0.1v less than the voltage needed for 2k C7
scaling up to 2100mhz .. every 50mhz is a increment of 0.04v

this is how we judge good scaling on fixed timings how far it will go on scaling of every 50mhz on 0.04v..
when a timing adjustment will be needed

for hypers at 2100mhz above,, u have to change the write to write (same rank) and read to read (same rank ) from 4 to 6 which will take about 1000mb's off the read in everest with a slight dive on latency
None of my Hypers scale anywhere near that well, and I have a kit of STT 2000 C7. Then again I can't get them to do 2000 C7@1.65v so maybe they just aren't good.