guys can someone help me here get past 205 bclock with the extreme..just bought these parts recently to try out..using the F13h beta bios..i just want to see if something is wrong or my chip(Batch 3910A) just capped off its limit..

Advanced CPU Features:
CPU Clock Ratio ................................ [21]
Intel(R) Turbo Boost Tech ...................... [enabled]
CPU Cores Enabled .............................. [all]
CPU Multi Threading .............................[enabled]
CPU Enhanced Halt (C1E) ........................ [disabled]
C3/C6/C7 State Support ......................... [disabled]
CPU Thermal Monitor ............................ [disabled]
CPU EIST Function .............................. [disabled]
Virtualization Technology ...................... [disabled]
Bi-Directional PROCHOT ......................... [disabled]

Uncore & QPI Features:
QPI Link Speed ..............................[auto]
Uncore Frequency ............................[x16]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [205]
PCI Express Frequency (MHz) ........................ [auto]
C.I.A.2........................................... .. [disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[900mv]
PCI Express Clock Drive ................... [900mv]
CPU Clock Skew ............................. [auto]
IOH Clock Skew ............................. [auto]

Advanced DRAM Features:
Performance Enhance ...................... [standard]
Extreme Memory Profile (X.M.P) ........... [disabled]
System Memory Multiplier (SPD) ........... [8]
DRAM Timing Selectable (SPD) ............. [quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[8]
tRCD ..................................[8]
tRP ...................................[8]
tRAS ..................................[24]
CR.....................................[1]
B2B.....................................[12]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [enabled]
CPU Vcore ..............................[1.4125]
QPI/VTT Voltage 1.150v .................[1.35]
CPU PLL 1.800v .........................[1.84]
PCIE 1.500v ...........................[auto]
QPI PLL 1.100v ........................[1.16]
IOH Core 1.100v .......................[1.16]
ICH I/O 1.500v ........................[auto]
ICH Core 1.1v .........................[1.2]

DRAM
DRAM Voltage 1.500v .............. [1.68]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]

here are my stable setting for 205 bclock resulting for a 4.3Ghz..as you can see the VTT is just 1.35v if i raise it to a higher value it just gives me BSOD with error 124..so i just lower it down and it becomes stable..now my goal is to check whether its the MAX bclock i can squeeze coz when i tune it up to 207 or 208 it just boots but to no avail cant run benches or any apps properly..

Thanks in advance to who can help..