Took the 960 out and installed my 920, this is where I'm at now. Everest and CPUz do not read the same vcore for whatever reason. The chip needed 1.392vcore load and 1.340v QPI/VTT bios on my UD7, but if Everest is correct It is about the same, IOH core was 1.140v and CPU PLL 1.140v on the UD7. I havent had the board long enough to do a lot of tweaking so it is not a fair to compare the 2 yet. Sorry for the large screenshot.



Uploaded with ImageShack.us