Hmm gona wait for the official F13 if its that close.
Hmm gona wait for the official F13 if its that close.
Last edited by Hornet331; 06-10-2010 at 02:54 PM.
Originally Posted by Andrea deluxe
GA-EX58-UD5 - F13h
-Improved LLC
-New layout
-Fix minus DVID
- 01.Jun 10
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
i love you....
Btw,new beta also posted on TT forum (01.June 10):
GA-EX58-UD4 - F11g
GA-EX58-UD4P -F14i
GA-EX58-UD3R - F12g
GA-EX58-UD3R (1.6) - FJ3
GA-EX58-DS4 -F12g
Last edited by stasio; 06-16-2010 at 11:30 PM.
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
Any reason these arent on the Gigabyte site? (http://www.gigabyte.us/Support/Mothe...ver=#anchor_os)
f13h
have a llc\d-vid bug.
How so?
Main Rig
Gigabyte z78x-OC Bios F5n
i7-4770k batch L310B492 Malay @ 4.5ghz with HT 1.2v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F13
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
good to know, just was about to install it...
anyone know if the bug has been fixed????
W3540@4200 : Gigabyte UD5 : GSKill PC16000 6GB : OCZ Vertex 60GB : WD 1.5TB : 2X HD5870 CF: Corsair HX620W : All water cooled by EK : W7 Ultimate
I love it!Anything about the bug Andrea talk about ?
Last edited by GunGod; 06-29-2010 at 01:57 AM.
PROUD|REX|E8600|2*1GB HYPER|9800GTX+ DK|on AIR
XOCT |RIIIBE|i7 920|3*2GB HYPER|4890 MATRIX|460W Enermax 3in1 24p|SyncMaster 940BF|on AIR
MEMBER|RIVBE|i7 4960X|4*2GB HYPER|GTX 470 SOC|1KW SilentPro|TV|Seidon 240|
in general, the new layout bios have a new vrm driven...
the oscillation of the current is a different from other old bios....
the current with same setting as old bios are too low in idle and in a more situation too high in load...
anyone who try older setting with new bios and surpice..... BSOD...
hi.
I didn't try new bios yet, but if you leave dynamic vcore alone and use fixed vcore with LLC enabled, that should work fine with overclocked chip I suppose?
Intel i7 3930K C2 4.6GHz 1.33V
MSI Big Bang - XPower II
Noctua NH-D14
G.Skill Ripjaws Z 4x4GB 2133MHz
Sapphire HD 7970
Mushkin Chronos 120GB, 2X Seagate 1TB
Corsair AX 1200W
Cooler Master HAF 932 Advanced
Even with older bioses I have had trouble keeping stable with dvid active and LLC enabled with anything over 200 bclk i always had to use fixed vcore with LLC
Last edited by acebmxer; 06-29-2010 at 07:38 AM.
Main Rig
Gigabyte z78x-OC Bios F5n
i7-4770k batch L310B492 Malay @ 4.5ghz with HT 1.2v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F13
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
Same. DVID never really worked for me. Using an i7 920 @ 200x20.
Shame... :/
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
That's because DVID requires certain hold times before the processor ramps to full load state. Without sufficient hold periods asserted, VCC won't reach the target voltage required by the processor at "X" load. Ideally, DVID should only be used at stock with SpeedStep active and with Vdroop enabled to ensure that undershoot and overshoot boundaries are within specifications (both Intel's and complimentary to the VRM). Outside stock conditions, there are no guarantees it will work as you want it to.
I been having trouble with latest official BIOS F12, i have troubles to even post with my overclock settings. Even when i bumped everything, it would hardly post. I guess I'll be keeping F9e's for now.
i7 920 D0 #3911A318 @ 4GHz| Noctua NH-U12P | Gigabyte EX58-UD5
OCZ 6GB Tripple Channel 1600MHz | eVGA GTX275 FTW | ATCS 840
Seagate Barracuda 1TB RAID0 | Enermax Infiniti 720W
I'm using F13h for few days and no problems so far, but it seems to be slower in browsing and changing values with new layout in M.I.T. section... Other than new look no real gains over F12 in my case
Intel i7 3930K C2 4.6GHz 1.33V
MSI Big Bang - XPower II
Noctua NH-D14
G.Skill Ripjaws Z 4x4GB 2133MHz
Sapphire HD 7970
Mushkin Chronos 120GB, 2X Seagate 1TB
Corsair AX 1200W
Cooler Master HAF 932 Advanced
How much VTT you have set for 4000 uncore speed?I'm using F13h for few days and no problems so far, but it seems to be slower in browsing and changing values with new layout in M.I.T. section... Other than new look no real gains over F12 in my case
.:If It Isn't Broke, Overclock It!:. .:Overclock It Til It Bleeds!:. .:If you can read this, then you aren't "well" Overclocked yet...!!! :.
My XMP profile sets 1.60V QPI/VTT, at first I was little scared of such a high VTT but I found somewhere that some kits sets even 1.67V at stock speeds and that it's safe for 24/7 so I'm using 1.60V, I tried to lower it and it can be stable with 1.55V but I stayed with default 1.60V
Intel i7 3930K C2 4.6GHz 1.33V
MSI Big Bang - XPower II
Noctua NH-D14
G.Skill Ripjaws Z 4x4GB 2133MHz
Sapphire HD 7970
Mushkin Chronos 120GB, 2X Seagate 1TB
Corsair AX 1200W
Cooler Master HAF 932 Advanced
hi everyone this might sound like a noob question but i have the gigabite-ud5
the thing i wanted to ask is every where i see this bord it has
2x pcie 16x in blue
and 1 pcie8x orrange
but my mobo has 3xblue pci slots is there anyreason for this
or is it me been stupid
thanks guys
Last edited by rubber5; 07-14-2010 at 06:03 AM.
Where have you seen an UD5 mobo with just 2x PCI-E slots?
All UD5 boards have 3 PCI-e slots.
thats not what i ment
i mean that 2 of the pci-e are blue and 1pci-e is orrange
but all of my pci-e are blue
and i dont know why
I guess the ES boards / samples for reviews had one orange PCI-E slot. Mine has also 3x blue.
here is the pics so you can see what i meen
my motherbord is on the left with the brown work surface
Posting Permissions
Reply With Quote
Bookmarks