***Asus Rampage III Extreme Owners Thread***

[brolloks]

Single Stage

[kill_a_wat]

Single Stage

cheers for that, trying to compile some info on o/c and extreme cooling used

nice bclk btw

[x-built-Stan]

Just started OCing my RIIIE this week, 980x. At 4.7GHz LinX run I started to get wandering erros in PC probe as shown in the picture. I am currently working my way through the thread lloking for siumilar situations.

Does anyone know what might be causing this problem - what can I adjust to resolve - BIOS 1005

Any assistance is appreciated.

[mahaudi]

@ x-built-Stan ......to much CPU PLL ! ( 1,88x )

Not over than 1,8v. . Over CPU PLL 1,8v. kills the CPU.

The 6core CPU`s run`s better @ CPU PLL 1,55 -1,60v.

And PCIe @ 120 ...Why ?

[spoolindsm127]

Just started OCing my RIIIE this week, 980x. At 4.7GHz LinX run I started to get wandering erros in PC probe as shown in the picture. I am currently working my way through the thread lloking for siumilar situations.

Does anyone know what might be causing this problem - what can I adjust to resolve - BIOS 1005

Any assistance is appreciated.

From my experience, CPU-Z specifically causes problems with PC Probe. Only when both programs are run simultaneously.

Does PC Probe throw errors without CPU-Z running? It was mentioned much earlier in this thread by an Asus support member that there was a conflict between the two programs. A solution was in the works at the time but I guess they haven't found it yet.

@ mahaudi

Try bios 0095 for Bloomfield. Works very well with my 920.

[donmarkoni]

@ mahaudi

Try bios 0095 for Bloomfield. Works very well with my 920.

Thanks for the assistance as I wouldn't really know what to recommend to mahaudi, last BIOS'es I used with Bloomfields were 9124 and 0009.

@ donmarkoni ....what the best Bios for Bloomfield CPU`s ?