** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[Rebound]

Well,

I really need some advice here :|
I have been on the overclocking world since my Pentium MMX 133 :p or my ADM Duron 600 :P with pencil mod.


But this i dont understand!
I have been reading all the replys on this thread and i now i have found that:
- putting AUTO on VTT, cpu ref, and AUTO on MCH core and mchref will POST and PRIME stable !!!

I check this values...
I go the BIOS and i put the same value it was on AUTO (that it was working)
Its not stable!


I saw this between pages 50 and 70 with another user.

:/

[Rebound]

UPDATE: (see my previous post - its above this one)

460FSB * 8 with those settings on AUTO was PRIME stable for 4 hours.

But

460FSB x 8,5 will not POST!

I am using 1,43vcore