Quote Originally Posted by jjjc_93 View Post
Wow man, nice results. What voltages were you pushing on the board to reach that fsb?
I cannot for the life of me post past 535fsb, I've got voltages pretty high aswell.
MHC 1.5v, CPU Termination 1.5v, PLL 1.6v, ICH 1.2v, and the cpu vcore has been as high as 1.55v. Dropping the multi down to X6 doesn't help me post past 535fsb either.
Got 120mm 60cfm fans close to the mch and another 120mm fan on the memory, with a household fan blasting into the side of the case.
Temperature sensors have started working on my cpu when I pass 50c and load at 4.5ghz under P95 was 58c.
Any suggestions are welcome, possible that I just got a subpar board?
Thanks bud

I have no second bench rig so i used my 24/7 system i just did this:

in a cold day of winter like 13C entering from the window my ambient inside was 22C





on summer where temps outside where 30C used my portable AC to push same temp to the rad 13C





and today with the new case and things i can do the same on ambient without the need of AC or cold air



I agree with Dark Energy that no need to push if you not willing to bench, i did it so my mates OC Nub, Jor3LBR, radaja and so others pushing volts but always be sure that temps a good, wont harm to bench i've used 1,6VTT, MCH till 1,7 etc...my mobo quad after 1,5 years still rocks still same tests

If you willing to play some i can send you some templates

For my 24/7 settings i use MCH on 1,46 / VTT 1,36, but im going to up that soon and wont harm

Cheers
Sergio