** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[andressergio]

Nice job Sergio. Look like a fun board to play with.

Thanks friend it much fun can't wait to get the Gskills 2000 CL6 here

[NeoGeo333]

Hey Sergio do you have any pics of your system? I just brought a USB3P and would like to watercool but dont know how it will look.

[andressergio]

Hey Sergio do you have any pics of your system? I just brought a USB3P and would like to watercool but dont know how it will look.

Shure mate

http://www.xtremesystems.org/forums/...=249147&page=3

That's my build

[Dark-Energy]

Have you tried running a Linpack tester at those speeds and voltages? What were the temps? Talking about actual core temperatures like in Realtemp.

[andressergio]

Have you tried running a Linpack tester at those speeds and voltages? What were the temps? Talking about actual core temperatures like in Realtemp.

I normally dont use Linx or IBT just test with prime but i did it for 4500 you can see it on the 4500 Linx Thread at 24C ambient wich is high
Just to quote this i could never did on my ex water cooler as it took max temp at 1 sec linx, this system dropped Linx one 10C or more

I did a run for you, sorry max mem i can use is that im not using page file, passed at low vcore





Cheers
Sergio

[Dark-Energy]

Not bad for temps. My cores do the same thing. Core 3 and 4 are 5C higher than core 1 and 2.

[NoGuru]

Parts are coming in, few more days........oh the waiting.

[andressergio]

Not bad for temps. My cores do the same thing. Core 3 and 4 are 5C higher than core 1 and 2.

Thanks mate

Some tell me to reaseat but i think its just a lazy core

[andressergio]

Parts are coming in, few more days........oh the waiting.

jejeje preparing the beast

i see some trueee silverrr there they look awesome huh ? and so the EK Top

Enjoy my friend

[OC Nub]

Very nice LinX run Sergio!

[NoGuru]

jejeje preparing the beast

i see some trueee silverrr there they look awesome huh ? and so the EK Top

Enjoy my friend

Yes the True Silver is nice. I was going to do a port and polish on the D5, then I remembered
I had the EK top, lol.
Waiting on a few more things then off to the Lab for leak testing.

[andressergio]

Very nice LinX run Sergio!

Thank you my friend i could do a 20 run but will not, dont wanna bust my X3380 if i do it maybe opening the door and let ambient go to 18C that will be nice

Yes the True Silver is nice. I was going to do a port and polish on the D5, then I remembered
I had the EK top, lol.
Waiting on a few more things then off to the Lab for leak testing.

polish ? lmao
be sure not to overtight barbs specially on the res

Cheers
Sergio

[l0ud_sil3nc3]

NoGuru it looks like your going to have a great time once your loop gets setup.

I just hooked up my first loop, MCP655 pump, MCR 320 rad w/ 6 YL fans, bitspower 7/16" compression fittings, Apogee XT, Swiftech Micro res w/ silver coil + distilled water, and I believe Primochill 7/16" tubing.

Everything went together very smoothly, and I wish I could say my X3380 went under water, but I nabbed a really sick chip for a great price. . .





whats even sicker is that I got the whole loop for $250 shipped from a member on ocn, its definitely inspired me to put all my rigs under water now.

[NoGuru]

NoGuru it looks like your going to have a great time once your loop gets setup.

I just hooked up my first loop, MCP655 pump, MCR 320 rad w/ 6 YL fans, bitspower 7/16" compression fittings, Apogee XT, Swiftech Micro res w/ silver coil + distilled water, and I believe Primochill 7/16" tubing.

Everything went together very smoothly, and I wish I could say my X3380 went under water, but I nabbed a really sick chip for a great price. . .


whats even sicker is that I got the whole loop for $250 shipped from a member on ocn, its definitely inspired me to put all my rigs under water now.

Nice loop, and even better chip! Dam that thing is nice. Congrats!

[andressergio]

NoGuru it looks like your going to have a great time once your loop gets setup.

I just hooked up my first loop, MCP655 pump, MCR 320 rad w/ 6 YL fans, bitspower 7/16" compression fittings, Apogee XT, Swiftech Micro res w/ silver coil + distilled water, and I believe Primochill 7/16" tubing.

Everything went together very smoothly, and I wish I could say my X3380 went under water, but I nabbed a really sick chip for a great price. . .

Congrats dude thats indeed sick lol

[l0ud_sil3nc3]

Congrats dude thats indeed sick lol

trying to take it easy since it is an ES and a B0 revision.

honestly that took insane VTT voltage because of the stuck uncore multiplier. Once I get a bios to fix that this chip is going to be great.


I submitted some scores for the X5660, and then realized that ES's aren't allowed, or thats what I assume after reading the rules page in depth. So are ES chips allowed for hardware points on HWbot?

[andressergio]

Well trying to up my Gskills ECO 2x2 1600 CL7

i almost got it lol this ain't fair







Cheers
Sergio

[NoGuru]

Dam 8 more iterations and you would be all set.

[andressergio]

Dam 8 more iterations and you would be all set.

noooo it was at last seconds to finish..lol either way dont passes memtest...

any suggestions welcome

[andressergio]

drop your multi to x8 and raise fsb to 500 and you'll be seeing something close to this without raising your vcore:

Edit: Added more screenshots:
333 Divider, 4.00B for DDR3 2000 1T @ 1.66v, 8-9-8-24 (5-6-10-88-6-1) TRD 8

and

7-9-7-24 (5-6-10-88-6-1) TRD 7

I will be doing some more overclocking and testing later...

u did some SPI32 mate ? i tried your settings went perfect but not stable...

see screens above

Cheers
Sergio

[zsamz_]

noooo it was at last seconds to finish..lol either way dont passes memtest...

any suggestions welcome

try 8-10-9-24 (6-6-10-100-6-1) or 7-11-9-24 (6-6-10-100-6-1)

i maxed out my 2200 pi @ around 1940mhz so i did cas6
voltage will not help much so 1.68-1.76

[andressergio]

try 8-10-9-24 (6-6-10-100-6-1) or 7-11-9-24 (6-6-10-100-6-1)

i maxed out my 2200 pi @ around 1940mhz so i did cas6
voltage will not help much so 1.68-1.76

Thanks zsamz_ will try today

Cheers !
Sergio

[jjjc_93]

Wow there's alot of reading for me to do in this thread. I didn't think there was still much love going around for the 775 socket.
I've been having some fun with my X3360 and EP45T UD3P, a little hesitant to push anything further though since I don't think the NB has a temperature sensor and the temperature sensors on my CPU appear to be stuck as they never pass 45c. I do have another 360 radiator lying around, is it worth adding that in if I want to push volts any further?
Here's my best shot so far:

[andressergio]

Wow there's alot of reading for me to do in this thread. I didn't think there was still much love going around for the 775 socket.
I've been having some fun with my X3360 and EP45T UD3P, a little hesitant to push anything further though since I don't think the NB has a temperature sensor and the temperature sensors on my CPU appear to be stuck as they never pass 45c. I do have another 360 radiator lying around, is it worth adding that in if I want to push volts any further?
Here's my best shot so far:

Congrats man wellcome to the thread

Dont be afraid on pushing the UD3P can handle it just be sure to have a fan over or near the MCH and mem

this i've done with UD3P + Q9650

http://hwbot.org/community/submissio...ghz_9sec_450ms

and this with UD3P + X3380

http://hwbot.org/community/submissio...380_9sec_234ms

all done with a thin 3 fan HW black Ice360 rad and dtek fuzion block

Now i moved to the EP45T USB3P that i love it with a bigger rad an nicer block, still didnt bench it waiting for some mem to arrive

keep posting
Cheers
Sergio

[OhNoes!]

u did some SPI32 mate ? i tried your settings went perfect but not stable...

see screens above

Cheers
Sergio

Yes mine passed 32m, no problem. Try 1.5v mch also, might help. What I've noticed is that, you need a little bit more mch for DDR3 than DDR2. I should have recorded all my settings, but didn't.