[Project: Ancient V2000x2 + Custom water blocks] 56k Warning!!

**bullydog** · 05-12-2010, 03:54 AM

Wow this is really an amazing build with great photos and excellent photography to complement!

what camera are you using?

**ppost** · 05-12-2010, 06:27 AM

Originally Posted by aka_GK

WOW!! Gorgeous!

Please be welcomed of your visit. I'm looking forward to seeing your project completion too

~

Originally Posted by jedimindtriks

seeing builds like this is a real inspiration... i seriously want to build my own water rig...

GET OUT OF MY HEAD :p

Thanks mate~

Originally Posted by bullydog

Wow this is really an amazing build with great photos and excellent photography to complement!

what camera are you using?

Thanks. Photos were taken by D700, still learning.....

**ppost** · 05-12-2010, 06:32 AM

Originally Posted by Philwong

Can we buy direct from the BP office?? Might be swinging by HK for a holiday.

Guan Hua (Taipei) is also pretty hopeless when it comes to finding proper watercooling products. Only one shop offers a decent selection, but at exorbitant prices.

Phil

Sure, but as far as I know, they only open in the afternoon on Thursday and Friday here. Sometimes even not available. So better phone Vincent before going. Do message Vincent of BP to match your schedule, he is a member here.
To make things easier, why not order online?

**Philwong** · 05-12-2010, 06:50 AM

Originally Posted by ppost

Sure, but as far as I know, they only open in the afternoon on Thursday and Friday here. Sometimes even not available. So better phone Vincent before going. Do message Vincent of BP to match your schedule, he is a member here.
To make things easier, why not order online?

Shipping is a killer remember?

Have you tried to purchase BP fittings directly from them in HK?

Phil

**ppost** · 05-12-2010, 08:18 AM

Originally Posted by Philwong

Shipping is a killer remember?

Have you tried to purchase BP fittings directly from them in HK?

Phil

Postage from Taiwan to Singapore should not be too much ...worth to have a check mate.

Right, most of my dual rotary 90 degree adapters I purchased at BP HK office,
infact mine was almost the first lot order in 2008, because I was the one who convinced Vincent to develop this large curvature 90 degree adapter product.

See here: http://www.xtremesystems.org/forums/...44&postcount=1,
that "Philip in HK" is me

**marxviper** · 05-12-2010, 08:48 AM

Wish BP have their own decent site.

Man, some online retails are so expensive.

Most of them do not have all the components from bitpower

I end up buying few stuff from US and UK. The shipping cost is killing me.

**Boulard83** · 05-12-2010, 09:11 AM

i just fell down my chair ...

NICE build milord !

really !

**ppost** · 05-12-2010, 09:33 AM

Originally Posted by marxviper

Wish BP have their own decent site.

Man, some online retails are so expensive.

Most of them do not have all the components from bitpower

I end up buying few stuff from US and UK. The shipping cost is killing me.

I'm sure he knows the demand. I wanted him to expand his online sales channel too.

Just I'm no difference to you guys, who express our comment and concern to him mostly relate to their products only.

Originally Posted by Boulard83

i just fell down my chair ...

NICE build milord !

really !

Thanks mate

~

**funny** · 05-13-2010, 08:12 AM

Made in Hong Kong?

**OggeOJ** · 05-13-2010, 02:33 PM

The orange build... stunned.

Just a thought, that open space in the 5.25 would probably fit a http://www.electricstuff.co.uk/nixiegallery.html

**Surv** · 05-13-2010, 06:46 PM

Flawless!!! It's pure sex... I'm speechless 0_0

BTW, Which software did you use to design custom wc parts and wc loop???

**ppost** · 05-13-2010, 10:35 PM

Originally Posted by funny

Made in Hong Kong?

Yeah, those custom water blocks and parts.
I'm from Hong Kong, as well as the guy who crafted them out for me.

To what I have seen around, finding these people who are willing to do these things was not easy, in HK too.

**ppost** · 05-13-2010, 10:53 PM

Originally Posted by OggeOJ

The orange build... stunned.

Just a thought, that open space in the 5.25 would probably fit a http://www.electricstuff.co.uk/nixiegallery.html

Wow, they are certainly nice stuff and attractive, I did struggle to get similar gadget. Tough that, I also want some room above the koolance pump for easier water re-filling whenever needed.
Now, I have to pull out the one below for the same job already, I hope to avoid any extra pulling action and scratching.

Actually, I think this will also be my last time using 5.25" reservoir, and would go for those popular reservoir tubes for easier access.

Originally Posted by Surv

Flawless!!! It's pure sex... I'm speechless 0_0

BTW, Which software did you use to design custom wc parts and wc loop???

Appreciate your reply

.
I did them all in AutoCAD, just the loop diagrams were further coloured in Photoshop.

**Anemic** · 05-13-2010, 11:31 PM

Very very nice!!

**sniperbob** · 05-13-2010, 11:46 PM

those are some SICK homebrew blocks! really like the look of the cpu blocks

**Oli4v** · 05-14-2010, 02:05 AM

Instant jawdrop

**the_dope_chaud** · 05-14-2010, 05:48 AM

wow, wow and wow !!!

This is some crazy build quality and workmanship. (x2

)
Can I ask what you do with so many hard drives, and what does the wife do with her rig ?

**ppost** · 05-14-2010, 09:26 AM

Originally Posted by the_dope_chaud

wow, wow and wow !!!

This is some crazy build quality and workmanship. (x2

)
Can I ask what you do with so many hard drives, and what does the wife do with her rig ?

Thanks, V2000 buddy

~

Each PC carries SSD x 4, raid 0 for the OS, and 2 common SATAs' for data and entertainment files. Both, my wife and me would run AutoCAD, Photoshop and often read and store large files.
And from now on, we won't update the hardware as frequent as before I guess....

**CptDreadFlint** · 05-14-2010, 02:02 PM

Breathtaking photography and gorgeous custom blocks, ppost!
Love the cable management on your HDs.

Looking forward to more!

**karbonkid** · 05-14-2010, 02:03 PM

Nice to see an architect around here! It really shows in your drawings ;]

Awesome work, I love how much you got custom-made.

**Seor** · 05-15-2010, 02:28 AM

what a wonderful machine!!!aaaamazing work of watercooling case

**Trader88** · 05-15-2010, 04:18 AM

I am from Hong Kong myself but living in Singapore right now, and I must say I'm so glad and proud to see your system. Well done man!

做得好好呀

**ppost** · 05-15-2010, 05:42 AM

Originally Posted by Anemic

Very very nice!!

Originally Posted by sniperbob

those are some SICK homebrew blocks! really like the look of the cpu blocks

Originally Posted by Oli4v

Instant jawdrop

Originally Posted by CptDreadFlint

Breathtaking photography and gorgeous custom blocks, ppost!
Love the cable management on your HDs.

Looking forward to more!

Originally Posted by karbonkid

Nice to see an architect around here! It really shows in your drawings ;]

Awesome work, I love how much you got custom-made.

Thank you all for your visit, it is so encouraging~~

~

**ppost** · 05-15-2010, 05:55 AM

Originally Posted by Seor

what a wonderful machine!!!aaaamazing work of watercooling case

Seor, the white D5, is that you ???

Good to see you here man, and thanks for coming~

Originally Posted by Trader88

I am from Hong Kong myself but living in Singapore right now, and I must say I'm so glad and proud to see your system. Well done man!

做得好好呀

Harlo and thanks man.~~
你真的抬舉了 ~

**Seor** · 05-15-2010, 09:07 AM

hohoho...its me

!!!good thing should be more support!we r proud of you!

華人之光

Thread: [Project: Ancient V2000x2 + Custom water blocks] 56k Warning!!

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions