Quote Originally Posted by shazza View Post

@ blazarcher - what, you didn't read all 30 pages + ? (just kidding!). As Waterlogged says, there are two MCR 420s in the bottom, with GT1850 fans, and the res is a 250ml - horizontal config on top the radiators. I could easily add a dual or triple rad in the top as well. I'm using 2 x MCP355 pumps, with the EK Dual DDC top. Yes, I could have placed it next to the motherboard, but everybody does that, and I also wanted to try getting all my water cooling components in the bottom compartment.
heh, sorry about that, I've got a bad habit of skipping pages. (Not all of them of course). As I said earlier, I am doing a build on a case that is almost identical to yours. I'm planning on placing a Magicool 480mm above the PSU and a 240mm radiator by it's side. However, this won't give me as much cooling potential if I put for example 2 MCR 420's down there (like how you did xD)

Was wondering why you have the radiators in the "middle" of the case and fans "outside" blowing air outwards. Wouldn't it be better if the fans were pointing in the opposite direction? So you would have fans on both sides of the case intaking cool air and blowing it through the radiators? The "hot" air would then be trapped and force out via the 2 small 92mm holes.

You've given me some ideas of how I could manipulate the placement of my radiators. I hope you don't mind if I "borrow" some of your ideas.