[BiP] Project: Duality (Lian Li V1000b II Plus)

[Antioch]

She's got a big ol butt on her now

[Oli4v]

She's got a big ol butt on her now

yes she does, and she got more load !

thx all


Update from the 3th of Januari 2009 - Feeling infected ehrrrrr?

AHOI pirates and piratettes !
I've shown a pic of the estate of it atm, wel this time more of it and the evolution of it, I also had a CF phase, but no picca's, dough, streaming trough msn xD.
but I got inspired by a build @XS, jokester wild's build, Lian dream ...
Lian Dream.


First some older picca's


simple and clean


bp playhour


the very latest revision of day 'n nite, why, aha to move the hardware to ... Duality


made the words turn into deeds !


nice picca imho, altough the ek block is DIRRRRTYYYYY after 1y4months ...


sphere


SHAKA BRAH !
 

more sphere


deep blue with silver !

This is where I ended@ the 16th of december ... 2009

but I still got more in the pipeline ... :crack:

[Oli4v]

Update from the 3rd of Januari 2009 - A View From The Afternoon/in da club, ~===´ùù

Piccaupdate, need to catch in with the dutch forums ...:crack:


finding for a perfect tubingroute


that brings a mess


new house for the pa120.2
 

need a new grill


filling


playing the uv


luckily it still worked
 

temporary fanguards


lights out


little ovreview


hup hup hop hap !
 

the front


end, lights back on !

thinking to buy a RX240 for the back ...


Double update ! :crack:

surprise time !

Update from the 10th of Januari 2010 - Nothing Comes Easy

ahoi me pirates

P5K dlx has come back out of his box, gonna run the system back again with the good ol' E6750, the p5q etc are going to my upcoming build with a lili V2000(need to start that log soon too.

specs: E6750@3.6, P5K Dlx wifi/ap, 6GB DDR2 pc6400 from corsair, 4x500GB, 2x320GB, HD4870 512 ....

I've also ordered a bp radgrill for the top, an EK coolstream XT120, mcw30, sleeving, ...


Piccatime !


staying in newyears sphere


Hmmmm ...


pumps not yet ok ..
 

keep your handtowels ready !


not straight yet ..., like you can see with your sharp eye


this will bring the solution




ain't it better?


overview

goodnight !

[Oli4v]

NOoooo Buuuuut

an update

Update from the 27th of Januari 2010 - Freshness

Ahoi me pirates, watercoolers and other sneaky persons. Updatetime, 'cause me mad brains made it to come up with a fresh idea. Partly allready executed, just didn't made it to get to photographing ... .

So I ain't gonna tell it yet, to keep you all excited, what I can tell is that I have to sleeve the 2 PCI-e 6 pins cables, the 24 pin and 8 pin are replaced with presleeved pieces :crack:, I also got some new work at the front, but first we go to the building of my ordere stuff that came in.



Teh stuffz0rs, I liked the candy :coke:



pumps out



emptying the case
 


BP 360 Radgrill, nice piece of quality



cleaned the SB with toilet paper :crack:



Oh no a box


have a look



A nice mcw30 with something added, what could that be , it must be Bitspower :coke:



It also has a base, what a luxury



Oh no, another box



Containing an EK Coolstream XT 120 rady
 


Tight BP 360 grill, perfect company for my V1000b



End of the update, see you guys soon, with more of this!

[.:R32]

Being able to put dual loops in there actually blows my mind, you deserve an award for it

[Oli4v]

Being able to put dual loops in there actually blows my mind, you deserve an award for it

Thank you !
I've been even putting 3 loops in a P182 :P

Update from the 28th of Januari 2010 - DAJUM

Ahoi, another update in between before the update that will come in the weekend.



The ubergrill ! gotta love BP !




Overview, for the ones with a good eye, you can see 1/2 of the new pump idea !
 


Time to shut the lights



Bitspowermess



MCW30, black piece of tubing has to change again to silver one, but i've been having issues with the ST adapters, leak's etc while running , but everyting survived , good ol' hardware !



Sleeved a satapowercable, gonna do the same with the other one !


The End (of this update )

[Antioch]

She certainly has grown.

[Oli4v]

She certainly has grown.

yes she does !

here some more guys

Update from the 4th of februari 2010 - Bedtime !

Almost time to go asleep, but still enough time to place an update


Opened my package


aranged the cable management


a 20mm Yate, with some deserved sleeve


builded everything in, and time to fill, ready set go !


as you can see, there's foam, I mean, real foam, (atm allready solved), but, yeah, I've been running on foamcooling for more than a week


Hoppa good beat


I also sleeved the other cable ....


other funky shot !


**BLING**


nice overview, because there always must be an overview


voila, my radgrill, full of 20mm yates (kinda' tight with the EK rad and the DVD ...

That's it folks for now, soon I'll be back

[The_Beast]

Nice build, I really like the blue/sliver tubing color

[Oli4v]

Nice build, I really like the blue/sliver tubing color

I've been hearing that from many people
and I myself is also liking it

[shazza]

Ditto on the blue/silver combo looking great. Nice job on your build.

[Oli4v]

Ditto on the blue/silver combo looking great. Nice job on your build.

Thx Shazza

soon there will be an update and I'm going to move my Q9550, P5Q DLX, 8gb geil, HD5850, and 640gb & 1tb into it once my fullcoverblock for my 5850 arrives

than sleeve the psu MDPC-x, some more details and done untill my v2000 is prepared for it (ca 6-8 months or so )

[Oli4v]

Update from the 4th of februari 2010 - Rolling

An update existing out of photo's with daylight

To do:
- order new silver tubing
- do the whole PSU MDPC-X
- get the original lian li 3x5,25" fan thingy BZ502black or smth like that













Here ya' go


Make it a DoubleDowyeah

Update from the 22nd of Februari 2010 - cleaned brings refreshment

I had to clean the 4870 it 'cause it was dirty as hell, atm few weeks later (2) it's again dirty as , need to get it nickelplated ... and also a smal change of the loop


Ready for action with HEINZ ! (they should really add this kind of usage in their publicitations


Dirty dirty mess around the fins, bit rusty, and after it was like opened for 5-10 min's the whole thing became black :s, Cu2O like rubidium said?


When heinz was done doing his job the block looked better


Everything back in, changed a bit@ the second pump ..., watch closely.
Altough we're ready to be filled captain


t-line to the cellar made some scratches, not yet to be fixed ... just sanded a bit, well doesn't really matter, in the 2nd week of the summer holliday I plan to take it all appart and give it a cleaning job


than he was running


from the top to downstairs
 

other nice picture


Moar watercooling pr0nz.


^^
 







all the HDD's got their namebor, but what's that, the clips from the backup disk aren't closed .



And than
Some texty words
E6750@3.6 got out to the P5Q deluxe ('cause I didn't want to switch the boards(altough it shouldn't be a bad idea ... hmmm.)
My hd5850 from my vendetta build will move to here until I'm done working on the case, once the ek nickelplated block will arrive
ordered an xfi to for this one...
Eddy from it-service said me last night that he had a good quite cheap deal on nickelplating, so the ek block will be send to there together with the mosfets' base and nb block .
ow and the Q9550 got in but this weekend i'll move the p5q in to here and do the swap whil' I'm going to clean this case .

thx for reading

What has to happen before the party 8 (MDPC-X sleeving, boardswap, 640gb and 1tb in and 2x 320 out, new silver tubes !), yeah I'm going to, this one will be standing next to Coolfris' V1000A (maybe we should take some shots of the 2 togheter

[Oli4v]

Oi, here I am, to lazy to translate the whole shizzle, so expect yourself to a lot of pictures, the machine is my only pc ath this moment next to my 17" asus laptop (ql65-320gb-4gb-hd4570 mobile).

The Li has experienced 2 lanparties past month, gone through a lot of metamorphoses, hardwarechange etc ...

If you have any questions about something, just ask them, I'll do my best to give you the information you need.

Walktrough from 14th of February 'ntil 4th of april 2010


















































































Overvieuwke.






See you@The Party 8 !

Pic's from the lanparty's are Here (ict-blue gameevent VI (10th actually), shure I'll go next time too)@Ghent@Rabbot@J-blok KaHo and Here (The party 8 @Eindhoven, Netherlands)

Thank's for watching

[Oli4v]

The lazy man has discovered google translations ^^ so 3 biggie updates in one !

Holiday Update - 12 April 2010

Oi, there is what happened with the case, I say not in words but in photos, one thing is certain, she's not cut in half.


[Img]http://i43.tinypic.com/wwnjw8.jpg[/ img]
Empty yes, why, haha, he is also like Vendetta completely different, then I agree midplate H'm polishing and quietly go to prep match for PA120.3 one in the front is, I still just an external DVD burner and get a Aquaero, everything should be gesleeved sleeving etc ... and still get a heap Scythe Gengtle Typhoons, intention is to all this as quickly as possible to implement, ie, to give priority to Vendetta.
I also got the great idea to top the BP grill, instead of back stabbing meshjes, all windows of black Plexiglas to stabbing, because that is something else and I still have the Plexiglas stand, I would possibly also white window should be replaced by black.
Cpublokje will also be renewed, after nearly 2 years using my EK Supreme will be time for the EK Supreme HF nickel edition, one super nice and super good block if I do say so myself, though not the cheapest but if you bling like, you also need something to count down.



So we stand by atm, because I refuse to overlap as long caps, hoping that within a week or 3 back in the closet, although there may be 4.



And another one to exit.

"END"

Update April 26 to 13, 2010 - Simplicity

After 2 days to muddle through, we are concerned, upon water cooling just as good as it is final, only a few small pruntjes as the reservoir for the CPU gpuloop a new one is because it looks quite awful. On the TC PA120.3 still need BP G3 / 8 to G1 / 4 so that the converters are more blingt, fans replaced by Scythe Gentle Typhoon, etc ... Tomorrow a new CPU block, but only after I mount once upon a festival, which is verklap I do not.
A choice is made, no DVD burner longer in the closet, not really what I use that thing rarely / never, perhaps only 3 CD / DVD burning gently, to install Windows and play COD4, last is simply to resolve a NOCDcrackje out to shoot.
Anyway, on to some photos with matching info ...


The entire cabinet in pieces across the floor.



Midplate bijschuren here, it was already prepared to turn a polishing, a long time ago, around October 2009 or something, but never polished and quite a few scratches richer, so here on scuren wet, then all will be okay.



BELGOM round, do as you probably know quite a few miracles, but here's the result, still contains quite a few irremovable scratches, but it can do well by them.



One radgril, yes those of BP, but what would it be white, there should still be fans, or was this out-of-the-box thinking?



Some random shot with all random meuk @ worktable.



Hmmmz that brings brightening, all small windows, of course it is 1 piece of plexiglass, plexiglass dark, gives a nice effect when light comes from within. Below what would sit there in front, you can choose good, the last photo reveals it is, but good ...




Playing with light and mirror of effectjes midplate ...



An LED strip, a picture with the camera in the dark of the wardrobe, this beautiful effect, ow yeah, and you had not yet noticed, the case is back in together stuck with screws which I include for Vendetta ordered, but I was more than abundant ordered dusja, enough for 2 boxes, maybe even 3.



Now comes the bus out of the bag once I said with my head on Sat cafe, but here's the sleeve in the sleeve, PA120.3, one polished normally intended for Vendetta, but he has his place in Duality received this Instead it goes perfectly, 1cm Fri bottom, and a similar amount on top, perfect fit. The radiator brackets are adjusted to what it can take place. The studs on the diagonal piece of the new pump mounts, something found in a box and had just enough, so will the pumps to float, but there is some extra mouse under coated, so I'm sure of a quiet operation of the pumps .



Some gemoffel and see if everything would fit in connection with the fans, I also agree doorgeflusht the wheel yesterday as it was here several months to do nothing and then there is the chance that some debris is not impossible, but Sat anything in the trash.



Another nice night-shot, we see the back of an old friend come back, the RX120 from XSPC, it is located aside, he will ensure the cooling of the motherboard over, and given that up to around 60W would come, it will that really is not a problem for this guy because he has a P35 motherboard + HD4870 has cooled, as he was a bit heavier, but it was not an impossible task for the master. If a fan gets a 1850rpm Scythe Gentle Typhoon, then maybe even 2.

Incidentally, all fans will soon be driven by a mining mCubed fan controller, because there is no room for the front because of the wheel, it comes tomorrow, the stock of Mr. Freddy High Flow.



Today it was time to open the setup to break down a mountain on the picture to your hard drive to say, especially if you know them all in this case midi + fit almost a 100% dual internal water cooling loops.

Also here is my experience with the PA160.1 say, this radiator is really a true beast, throw a cheapo Yate Loon Q9550 @ 4GHz against and I just kept without any problem sub 50 ° C on all cores, while those for the WCG RRTech was doing. So full load. Thanks to Eddy for IT service to those reserved for me to have him and him nogvorens had ordered them to send my last order there, nice surprise.



Here the closet, ready for all the hardware back to nest in its interior.

Thanks for reading and later, this was only part 1, soon come pr0npics, just a little break.

Please do not walk away from your device during commercials, so goes the story once again.


A song for the second part

http://www.youtube.com/watch?v=RbuIGp3kYJg


27/Part2/Pr0nUpdeet Update - 14 April 2010 - Illuminaughty

Advertising is done, so now on to the closet where it is today, how she looks, what it does and this is especially Jambers not.

I warn a moment, this update may cause an increase saliva production cause, so please take a towel under your foot to keep or on your desk to lay before you have your keyboard to pennants helps, if you choose for your keyboard as setting aside , you can post your desktop yet as polishing your drool, this is a less clean method, nevertheless probably equally effective.

Let the show begin with the start of construction, also my sincere apologies for forgetting to take one lot or not essential photographs, where necessary, the text is indented.



Start building, we like Cool Fresh, with a mat on the midplate to scratches and other damage.



Loops begin to form, blue and white theme, as tight as possible, tank placement tryouts, as shown above but not small multiresjes 100 150 pages.



Here it is, beware.
All cables were still connected, but the water cooling could operate as it should, be active is also an appropriate term. The self-made resjes hanging brackets (not that of Plexiglas, the black stuff for the wheel), which is a pain in the ass were to mount. Whether I do well I do not know yet, I wanted as much of the wheel appear to hold because it still has something, but it will be the cable of the lighting in the picture, that we need something longer.



This is what falls from above to see the bling radiator, gpublok, anyway, yes, a lot of bling.





Nice to know what is front hiding.



Slightly higher.



Cable management, which is absolutely not necessary as long as the good old neo he 550 gesleeved is not doing anything and I had to put it so open. The sled I also began to take Cool Fresh for a nice price, already a hoeraatje for him!



And now here is a dry picture, taken with flash, so he stands there 's pretty well, waiting on the sleeve and some "knickknacks" soon to come.

That was it, I hope you enjoyed your night or morning.

"END"

[Oli4v]

Update 27 to 14 April 2010 - Theme From Discotheque

Oi readers and readeresses.

Update Time today because a man came to the door with a pack of GLS, GLS a van and a package for me, as I was expecting the package of Freddy.



Obviously we could not let it unopened.



But the only thing I could find was a High Flow TP8 goodie bag-_-.



But then i turned the bag on it's head and there was this nice ...



The best part is that bag is this box.



This fun content.



Curiousity from the block directly targeting to open because I knew that the stock jet plate is not the best, so there was another selected. Also I wanted the difference to know the old supreme, then briefly stops beside put my supreme in a box had been stored, the tops are almost identical design, just around the inlet, so the outlet, there has been at the HF is more space, a little wider corridor. Another difference was the bottom, which seems very hard on those of an EK supreme LT that block I lie here anymore so I could not compare with it, there's still a H'm difference with that of the old , where a thicker base with fins that are carved into it, and the result was that the plane was supposedly base (inside) but the fins were in, here they are wiser to speak of.



All jet-plates, which right you can change something with some dremel arts. 2nd was the stock one.



This is the one I've chosen, it seems reasonable to me some water to pass, although the 4th also a reasonable chance governor was at that level ...



Scythe Gentle Typhoon 1850RPM sleeved @ @ @ RX120 and installed, and silence.



Finally I have one hour to keep sweet with mining mCubed fan controller. A lot of fiddling to finally find out that I can not control software, but that analogy because I must stand alone use H'm. Combination with a T-balancer BigNG you can control this one. That aquaero or will it be for Vendetta.
Well then, I have quite a few are fiddling with various sensors and capabilities of the thing, eg, that fans would be spinning faster at a specified temperature above the setpoint, which works, but then the fan is running very slow (because you but can go up to 20 ° C) and the water of the cpu / gpu loop is not so hot, despite my WCG RRtech for my cpu @ 100% load. That the mobo / ram loop is warmer, an ideal watertempje to take a bath.
Setting the fans at 60% would turn to a temp agency to keep working reasonably well but for the Gentle typhoon that I have is that some tests are slow, even running up almost H'm hardly hear, so you can perform better leave!
So my mining is to analog so I set each channel a certain fanspeed meegeef. Overall value for money certainly not a bad buy, because you must know that this 50w per channel can be provided with an ICM BigNG he imho be more ideal to start using.

End of update, as the packets of Cool Fresh and Eddy here, then there is upgedeet again.

"END"

[Oli4v]

Update April 29 to 17, 2010 - Restart

Good evening, today I was back in Once Upon a festival, small alternative festivaletje around here. After my tent once mopped have found that the time for a fresh shower and poured me my pctje to take to the Supreme HF nickel to build.

Obviously I wanted to build something else.



Previously, this box-it needs service, all fortunate that she was delivered yesterday as I walked somewhere skewed



These included an external dvd burner, a new shiny, fresh 150mm res, which shrink and candy that I've worked pretty fast inside.



Similar started working, started the cpu / gpuloop emptying by a stubbytje, some hose and the bottle to that hang over, tap open and empty, but that trade.



After what I have the old supreme gevroet removed, but then just laid next to his younger brother, imho anyway nice 2 blocks.
The old supreme Sat indeed be full of trash and other filth, also had the whole inside of the copper top blackened, of course, just take a turn with ketchup data, but there will be another one with cooking vinegar also follow, so it certainly clean can stored. The soil had less problems.



Then came the little picture here on top of me. I had a lot if I'm honest my new Supreme HF nickel built, but by all the bling violence, I was a little forgotten. I had not even entered through, everything looked good, the computer worked, I started from habit core temp and saw a temperature (@ full load with WCG for RRtech) of 87 ° C for the warmest core @ 4GHz, which was not good because this block was his voorganer 40 ° C @ full load less.
There's something mustache. Somewhat discouraged I hit the icy water block ... hmmm, that bite out of each other!



This trifle overlooked, I would have to adhere H'm so the soil would remain nice Wednesday. And now all my enthusiasm by the bling I've been so H'm stops, and "remove before use" completely forgotten. You can tell the whiter MX2 part fits my printing is good, you also immediately notice the rounded bottom of the block.
On my Q9550 I found a nice paper pancake.



Opieuw sticker off and mount that bite!



Of course, if said than done: D.



I was ready, yellow nature of some use to the other over what to refill, because after a few days is a lot of air.






GT powah!



This nice view from above the case!




So it was, at the next time the powersupply will probably get it's sleeving allready

"END"

[Oli4v]

Update April 30 to 24, 2010 - Sneaky

Sneaky quick update very early in the morning before I go to work.



The role from Coolfris ...



2 hours later I was this far, yesterday Friday than 2x PCI-e molex and the cables made.



Candy or was it supreme HF nickel?



Blingboooooy in the front. The BP thread converters are also ordered so I'll have to drain the loop when they're here, but had to anyway, 'cause there 's some dirt (a little oxidation dot ) in my Wer grakablok, prolly still comes from the rad (pa120.3, maybe it catched some dirt when it was lying around for a few months and only 2 days of use :P

That was it, tonight probably more, otherwise when I'm back from Greece next week and then my 4 Gentle Typhoons 1850rpm in effect, a thin 1cm fan of Scythe and some splitter cables, once the PC then closed, he remains closed 'ntill Christmas holidays for the first Maintenance: D.
Then there comes a time when I don't want to spend any money on my PC, what do we do? AHA party all night long, sleep all day and going for teh chick's!

"END"

[Oli4v]

Update 31 - 1st of May 2010 - Whole - Lotta Love

Oi, While being back from Greece (Hellas) I still had to give you guys an update full of pictures, even then there's still a small one coming up with the latest costs for the build, containin' some Scythe GT 1850 RPM's.
Than I really don't want to spend a lot of money on my pc, but good, time for teh picca's.












 


My lovely pumps, pumping day in day out, as hard as they can !







Some TC PA love ...


Still have to attach the psu correctly with the psu-extender, but that's for somewhere this week.






Clean or not clean?


Fat ramcooling + sleeving n the angle of your eye + some resses.


BZZZZZZZZZZZ...


Bitspowah !



Imho the best shot that I've allready taken from my supreme HF.



A real blingbow between al those raw mips diamonds ^^
 












And done, tomorrow before the noon I'll go to the Delhaize, my postpoint, to pick up my order from it-service, than I'll watch to find a little hole of time to get the goods in the build, do some better cable management, close the case and enjoy my work and thinkering.

“END”

[Philwong]

A bit too cluttered. Would be better if you could hide the pumps, while maintaining dual loops in such a small casing.

Phil

[Oli4v]

A bit too cluttered. Would be better if you could hide the pumps, while maintaining dual loops in such a small casing.

Phil

I don't mind to be able to se my pumps , in the early revisions they were in the basement, but since I'm hiding allready 6 hdd's in there ...

But offcourse, everyone has his own taste ... It's a bit overvilled, but I can live perfectly with it, it's just a case of using the space you get

[Philwong]

I don't mind to be able to se my pumps , in the early revisions they were in the basement, but since I'm hiding allready 6 hdd's in there ...

But offcourse, everyone has his own taste ... It's a bit overvilled, but I can live perfectly with it, it's just a case of using the space you get

Agreed. To each of his own I guess.

Space is always a luxury for V1Ks.

Phil

[Oli4v]

Agreed. To each of his own I guess.

Space is always a luxury for V1Ks.

Phil

And finally it's finished, Scythe GT's 1850rpm on the PA120.3, 2 on the 120.1, backside closed ...

Gonna write an update soon

[Oli4v]

Update 32 - 2 Mei 2010 - Hellas

Short endupdate, after this there will follow a pictureround when the weather is better, but for now and the coming months, it will serve my as my trusty machine.



The box with the last pc-related buys for the coming 2-3months.


That contained 4 Scythe Gentle Typhoons 1850 RPM, a thin little scythe fan for between the hdd's, splittercables, candy's who didn't survive 'ntill the update, and ek reservoirbottoms, but I ordere tops, so those will prolly return to from where they come.


Quickly unpacked, the right heap is the one I don't need


Offcourse I took the role that I recieved from Coolfris a Week ago with me to serve those fans from some sleeve.


But from where are these Yates coming?


From where these guys have taken seat.


20 Minutes of cable management dilivered me this acceptable result, so now the psu can be attached normally with the LiLi psu extender.


Like that it was like 2 pieces of cake to reattach that sidepannel.


Also in the dark it look's neat.


The other wellknown rightside with windowpannel, when I'm sick of this view I'm able to hook up a standard closed pannel to it.


A classicla overview.


Everything in it, in between the 2 hdd racks ther's the little Scythe Jiju slim fan fitted to keep my os, film and extra's disk cool, the other 500GB disks on the left will still recieve enough airflow from the GT's.


The no name BST converters walked away to a PA120.2 so the BP converters could get installed in their new home.


The cables up on top, were 'llready since the last update fitted neater. Like now it's ubahclean up in top. At least I'm still thinking to switch the size of tubing from the cpu-gpuloop to 7/16.

'ntill the Picuteround.

“END”

[Oli4v]

Update 33 - 7th of may 2010 - Voodoo People

Oi, Here you have part 1 of the pictureupdate from the shoot@daylight. Also I wanted to say that I'm taking over 20 BP stubies 3/8 from Coolfris, they'll replace the Compressionfittings with 5/8 and koolance clamps (one of there good things imho), but same colors of tubing. The only thing is that the blue masterkleer I have is a tint lighter than the feser one, but not specificaly uglier.




I've been around, strawing with this pic on different fora as teaser, some people were asking for towels ...



































That's it for endpics with compressions, next update we'll check up the inside.

“EINDE”