No C & Q is disabled but have random speed of 50mhz difference up and down , voltage at the bios not correspondending with cpu-z .
No C & Q is disabled but have random speed of 50mhz difference up and down , voltage at the bios not correspondending with cpu-z .
Xeon X3440 @ 3,6 GHz 1,275 V ::: Zalman CNPS10X Performa ::: ASRock P55 Pro/USB3 ::: Transcend 8 GB @ 1890 MHz 9-11-9-27 1T 1,64 V ::: Vertex HD5770 1 GB DDR5 ::: AC Accelero L2 PRO ::: Crucial C300 64 GB ::: WD6400AAKS 640 GB ::: ASUS Xonar DX ::: Edifier S330D ::: Silver Power SP-SS400 ::: Antec 300
So what is the verdict? what bios is the best so far?
ASRock 890GX Extreme3 BIOS P1.20
Phenom II X2 555 BE > X4 B55 @ 3.4Ghz
2x 2 GB G.Skill 1600 CL9 NQ seriies
OCZ Vertex 30GB SSD 1.5 Firmware
WD Caviar Blue 500 Gb HDD
Antec 200 S case
Antec Basiq 550W PSU
ASRock 890 FX is finally up on the ASRock official website.
ASRock 890GX Extreme3 BIOS P1.20
Phenom II X2 555 BE > X4 B55 @ 3.4Ghz
2x 2 GB G.Skill 1600 CL9 NQ seriies
OCZ Vertex 30GB SSD 1.5 Firmware
WD Caviar Blue 500 Gb HDD
Antec 200 S case
Antec Basiq 550W PSU
Hi guys,
Got the 890GX Exterem3 + X2 555 since yesterday and I was able to unlock the two extra cores so it became a X4 B55. I've had it Prime95 stable for 3 hours so I decided to reboot and install some new drivers. After this the CPU returned to a X2 555 again and so far I've not been able to unlock the two extra cores again. I've tried it with every bios available on the Asrock website, but no prevail. Anyone knows what I might be doing wrong? Since I had it prime stable for 3 hours the two cores must be working good right?
Regards, Quintus
When you reboot the board shut down, depents on the bios though , with 1.20 bios it won't do that and it stay's at 4 core's , thats why i said 1.20 is far best for unlocking.
unfortunaly its not on the website but anybody who pm me their e-mail can get it by mail from me.![]()
Got Any 1.6x+?![]()
MBO: ASRock 990FX Fatal1ty Professional
CPU: AMD FX-8120 @ 4GHz 1.2V
Cooling: Thermalright HR-02 w/ Zalman ZM-SF3 120mm
RAM: 2x 4GB 2133MHz - Patriot Viper Xtreme Division 2
GPU: XFX R7770 Core Edition
SSD: Kingston V200+ 90GB
HDD: 2x WD 2TB Green + WD 3TB Green
Drive: LiteON iHAS122 @ iHAS324
PSU: Corsair VX550
Case: LanCool Dragonlord K-62
Display/TV: Samsung LE32D550 32''
Sound System: ASUS Xonar D2X + Logitech Z-906
Mouse A: Micro$oft Natural Ergonomic Wifi 6000
Mouse B: Logitech MX518
Mousepad: XFX Warpad XXL
Keyboard: Micro$oft Natural Ergonomic Wired 4000
Joystick: Logitech Freedom 2.4GHz Cordless
possible to share the 1.7 bios plz, hope it fixes the Thuban issues
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
Thanks for the 1.2 bios Rol-Co, it works! It's a quadcore now but the name is different and so are the clock speeds:
http://valid.canardpc.com/show_oc.php?id=1151347
cool & quiet possibly enabled in bios?
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
MBO: ASRock 990FX Fatal1ty Professional
CPU: AMD FX-8120 @ 4GHz 1.2V
Cooling: Thermalright HR-02 w/ Zalman ZM-SF3 120mm
RAM: 2x 4GB 2133MHz - Patriot Viper Xtreme Division 2
GPU: XFX R7770 Core Edition
SSD: Kingston V200+ 90GB
HDD: 2x WD 2TB Green + WD 3TB Green
Drive: LiteON iHAS122 @ iHAS324
PSU: Corsair VX550
Case: LanCool Dragonlord K-62
Display/TV: Samsung LE32D550 32''
Sound System: ASUS Xonar D2X + Logitech Z-906
Mouse A: Micro$oft Natural Ergonomic Wifi 6000
Mouse B: Logitech MX518
Mousepad: XFX Warpad XXL
Keyboard: Micro$oft Natural Ergonomic Wired 4000
Joystick: Logitech Freedom 2.4GHz Cordless
Hello,
Somebody know, where on the 890gx are the point to measure Vcore and Vmem?
I Have 955 and for now I try 1.0, 1.1 and 1,51a and the best oc I have on 1.51a. I see, there is a new official 1.6, but I read, you have 1.7, If someone send me the newest bios, I would be grateful.
Phenom II x6 1055T | ASRock 880G Ex.3 | 560Ti FrozrII 1GB| Corsair Vengeance 1600 2x4GB | Win7 64 | M4 128GB
VR Box - i5 6600 | MSI Mortar | Gigabyte G1 GTX 1060 | Viper 16GB DDR4 2400 | 256 SSD | Oculus Rift CV1 + Touch
using a logitech too, what issues are you having ?
My 1.51 lost the multies several times during the LN2 sessions, sadly we didn't have internet at the 3rd AOCM event (great OC event) in Germany to grab the 1.2 on my FTP...
Board was rock stable under LN2 (once the bios recognised the correct settings lol )
![]()
Last edited by Leeghoofd; 04-26-2010 at 08:01 AM.
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
MBO: ASRock 990FX Fatal1ty Professional
CPU: AMD FX-8120 @ 4GHz 1.2V
Cooling: Thermalright HR-02 w/ Zalman ZM-SF3 120mm
RAM: 2x 4GB 2133MHz - Patriot Viper Xtreme Division 2
GPU: XFX R7770 Core Edition
SSD: Kingston V200+ 90GB
HDD: 2x WD 2TB Green + WD 3TB Green
Drive: LiteON iHAS122 @ iHAS324
PSU: Corsair VX550
Case: LanCool Dragonlord K-62
Display/TV: Samsung LE32D550 32''
Sound System: ASUS Xonar D2X + Logitech Z-906
Mouse A: Micro$oft Natural Ergonomic Wifi 6000
Mouse B: Logitech MX518
Mousepad: XFX Warpad XXL
Keyboard: Micro$oft Natural Ergonomic Wired 4000
Joystick: Logitech Freedom 2.4GHz Cordless
mmm my delete doesn't work on the G11, luckily you can also press F2 to enter with ASrock :p
Will pass it trough, the G110 keyboard isn't working at all ?
Last edited by Leeghoofd; 04-26-2010 at 08:53 AM.
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
I dont have such a problem with 1.51a. Maybe because I use only simple WC. But if you have more stabel on 1.2, I would try him too, but could you send him to me on pw.
You have pm Jarek 135
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
MBO: ASRock 990FX Fatal1ty Professional
CPU: AMD FX-8120 @ 4GHz 1.2V
Cooling: Thermalright HR-02 w/ Zalman ZM-SF3 120mm
RAM: 2x 4GB 2133MHz - Patriot Viper Xtreme Division 2
GPU: XFX R7770 Core Edition
SSD: Kingston V200+ 90GB
HDD: 2x WD 2TB Green + WD 3TB Green
Drive: LiteON iHAS122 @ iHAS324
PSU: Corsair VX550
Case: LanCool Dragonlord K-62
Display/TV: Samsung LE32D550 32''
Sound System: ASUS Xonar D2X + Logitech Z-906
Mouse A: Micro$oft Natural Ergonomic Wifi 6000
Mouse B: Logitech MX518
Mousepad: XFX Warpad XXL
Keyboard: Micro$oft Natural Ergonomic Wired 4000
Joystick: Logitech Freedom 2.4GHz Cordless
Leeghoofd - Thanks, I get bios.
On 1.2 I have to set more V then on 1.51a. I try official 1.6 and he is worst then 1.51a too. I stay on 1.51a... For now![]()
When i use bios 1.20, there's no shutdown again when UCC enable. But if UCC disable my proc keep reading X4. So, the only thing i can do, clear cmos. Is there another setting??? thx
You can now press X at boot to activate Turbo UCC on the fly, or D to disable, nice feature!
Bookmarks