** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[xzulu]

Hey xzulu yes bussy with my kid its 1,5 month now but still have time to play with this baby that arrived yesterday (Thanks Tony )

this us on the EP45 UD3P rev 1.0 lets see how it goes with the EP45T USB3P




this is copying at the same time 22GB of 1149folders and 17k+ files to an external disk and copying 5GB+ of samples to the SSD



I love this SSD

Cheers mates
Sergio

Hey! Nice to hear that you're doing great!

Yeah, those Intel SSD's Rock.

I'm surprised that you decided to try out the DDR3 Ver. Hope you get better clocks than before!

Cheers!

[andressergio]

Hey! Nice to hear that you're doing great!

Yeah, those Intel SSD's Rock.

I'm surprised that you decided to try out the DDR3 Ver. Hope you get better clocks than before!

Cheers!

Sup mate yes i wanted to try some nice DDR3 on a nice Giga board with my X3380 will see how it goes

Thanks !
Sergio

[l0ud_sil3nc3]

That pic is so small you cant even tell whats happening.

sorry about that that is a bit small here is a better one. . .



I have stuck sensors on cores 0,2,3

I can't wait to put this chip under water

What are the dividers I should be using? I have some Kingston HyperX DDR3 2000 c9 if that helps. Also what MCH voltages should I be using?

[Hoss331]

What are the dividers I should be using? I have some Kingston HyperX DDR3 2000 c9 if that helps. Also what MCH voltages should I be using?

Well you dont want to be using that one (3.33) since its borked so you can either try to get one of the 4.0s to work or just stick with 3.20B.

[l0ud_sil3nc3]

Well you dont want to be using that one (3.33) since its borked so you can either try to get one of the 4.0s to work or just stick with 3.20B.

none of the 4.0's seem to work, I guess the 3.20B will have to work.

[Hoss331]

3.20B still has pretty decent bandwidth and at that speed I would think you could at least run it at cas7.

[NoGuru]

Did a quick bench today. http://valid.canardpc.com/show_oc.php?id=1151229

[In-Fluence]

Nice work NoGuru, nice low voltage for that speed.

Could anyone tell me how low the voltage goes on the EP45T-USB3P please? I'm looking at a pair of G.Skill Eco's rated at 1.35v (although 1.5 is ok apparently), and was wondering if the board goes down that far?

[NoGuru]

Nice work NoGuru, nice low voltage for that speed.

Could anyone tell me how low the voltage goes on the EP45T-USB3P please? I'm looking at a pair of G.Skill Eco's rated at 1.35v (although 1.5 is ok apparently), and was wondering if the board goes down that far?

Thanks In-Fluence

Eco's? Are you trying to save the planet one stick or ram at a time?

[In-Fluence]

I was just looking at my options, speed isn't so important to me when it comes to ram although I might consider some better sticks at some point. They just seem like a good price, they look ok, and they can o/c reasonably well, plus the fact that they're g-skill is alway a plus in my books! So no info on the ram volts then? I'll have to take a peek in the manual - see if it's in there

[Hoss331]

My T board goes down to 1.15 then 1.25, 1.35, 1.45, 1.50, 1.56, 1.58, ect, so you should be good.

[l0ud_sil3nc3]

My T board goes down to 1.15 then 1.25, 1.35, 1.45, 1.50, 1.56, 1.58, ect, so you should be good.

My USB3P does as well.

[NoGuru]

I was just looking at my options, speed isn't so important to me when it comes to ram although I might consider some better sticks at some point. They just seem like a good price, they look ok, and they can o/c reasonably well, plus the fact that they're g-skill is alway a plus in my books! So no info on the ram volts then? I'll have to take a peek in the manual - see if it's in there

I love my G.Skills, they will do 1066 at like 1.8v.

[In-Fluence]

That's reassuring to hear, thanks. Just waiting for the parts now. First will be my rad, but the board wont be with me for another week at least, so I'll fit & test the rad & see how things move along, hopefully this will replace the weakest link in my loop..

[l0ud_sil3nc3]

I will have a Xeon X3380 here tomorrow

[radaja]

l0ud_sil3nc3,nice ,looking forward to your results

[l0ud_sil3nc3]

l0ud_sil3nc3,nice ,looking forward to your results

I also have systemvipers w3540 batch #: 3846B coming as well, looks like i am going to be busy.

it's done 5.4 on LN2 @1.646 volts

[NoGuru]

I will have a Xeon X3380 here tomorrow

I also have systemvipers w3540 batch #: 3846B coming as well, looks like i am going to be busy.

it's done 5.4 on LN2 @1.646 volts

You have your hands full, should be a lot of fun.

[radaja]

I also have systemvipers w3540 batch #: 3846B coming as well, looks like i am going to be busy.

it's done 5.4 on LN2 @1.646 volts

oh wow so you snagged it huh?you should be on your way to some
very fun OCing adventures indeed.the W3540 should get you some
very high OCs for sureyou will be busy

[l0ud_sil3nc3]

oh wow so you snagged it huh?you should be on your way to some
very fun OCing adventures indeed.the W3540 should get you some
very high OCs for sureyou will be busy

I can't wait for the W3540 to get here as well, the 23x multi should make for a nice oc.

Also UPS dropped the ball today, yesterday I ordered a Xeon X3380 from them with Next Day Air AM and it looks like it will be Monday before I get it

Provantage had the best deal on the X3380 if anyone is looking. I just hope that I get a nice low VID chip.

[systemviper]

Sweet , Took the chip to the shippers today, so you should have it early next week.

I am about to embark on some SS action with my UD3P, a P5Q and blackops, I have a lot of 775 chips for the adventure.....
I am a little bit worried about the UD3P, it was killer with the Q9650 and Q9550 hitting CLOSE TO 560 fsb, but for my 8500 and 8400 i need to hit over 600 fsb to even get on the board.
Has anyone here rocked the UD3P over 600fsb and if so any chance of a where you where with your voltages, not really vcore but the others i think make a big difference
once the board is pushed up that high. If i can start to hit some nice fsb's then i might even water cooll the board to help keep it cooler....

So this will be a fun week, also look forward to seeing what that 3450 can do, i can't wait to get a R3E but i need to go thru this pile of 775 chips first...

PS, I would love to play with that 3380 when you get done with it, that is just the chip for my UD3P
I was dumb when i got my X3380 ES and sold it way to quick, but yhte i7 just came out and i was seeing starz, i know it could have went higher... But i was also rocking with my
Q9650 and trying for a top spot and figured i didn't need both chips......

X3380 ES

Q9650

Q9550

I also need a Q9540 and a x3370 to add to the list......

[NoGuru]

I have seen some validations around 615 FSB, but I have no idea where the volt's where at.

[systemviper]

I have seen some validations around 615 FSB, but I have no idea where the volt's where at.

Yea i am currently looking at hwbot and it seems that there are a few gig ud3p over 600 but the majority is the rampage extreme x48

[NoGuru]

Yea i am currently looking at hwbot and it seems that there are a few gig ud3p over 600 but the majority is the rampage extreme x48

Here is a 710 FSB with the rampage and E8400 http://www.neoseeker.com/news/8431-n...lock-over-700/

[l0ud_sil3nc3]

i am checking out hwbot and there are no entries for the EP45T USB3P on there, is it because the board is somewhat new?