The lazy man has discovered google translations ^^ so 3 biggie updates in one !

Holiday Update - 12 April 2010

Oi, there is what happened with the case, I say not in words but in photos, one thing is certain, she's not cut in half.


[Img]http://i43.tinypic.com/wwnjw8.jpg[/ img]
Empty yes, why, haha, he is also like Vendetta completely different, then I agree midplate H'm polishing and quietly go to prep match for PA120.3 one in the front is, I still just an external DVD burner and get a Aquaero, everything should be gesleeved sleeving etc ... and still get a heap Scythe Gengtle Typhoons, intention is to all this as quickly as possible to implement, ie, to give priority to Vendetta.
I also got the great idea to top the BP grill, instead of back stabbing meshjes, all windows of black Plexiglas to stabbing, because that is something else and I still have the Plexiglas stand, I would possibly also white window should be replaced by black.
Cpublokje will also be renewed, after nearly 2 years using my EK Supreme will be time for the EK Supreme HF nickel edition, one super nice and super good block if I do say so myself, though not the cheapest but if you bling like, you also need something to count down.



So we stand by atm, because I refuse to overlap as long caps, hoping that within a week or 3 back in the closet, although there may be 4.



And another one to exit.

"END"

Update April 26 to 13, 2010 - Simplicity

After 2 days to muddle through, we are concerned, upon water cooling just as good as it is final, only a few small pruntjes as the reservoir for the CPU gpuloop a new one is because it looks quite awful. On the TC PA120.3 still need BP G3 / 8 to G1 / 4 so that the converters are more blingt, fans replaced by Scythe Gentle Typhoon, etc ... Tomorrow a new CPU block, but only after I mount once upon a festival, which is verklap I do not.
A choice is made, no DVD burner longer in the closet, not really what I use that thing rarely / never, perhaps only 3 CD / DVD burning gently, to install Windows and play COD4, last is simply to resolve a NOCDcrackje out to shoot.
Anyway, on to some photos with matching info ...


The entire cabinet in pieces across the floor.



Midplate bijschuren here, it was already prepared to turn a polishing, a long time ago, around October 2009 or something, but never polished and quite a few scratches richer, so here on scuren wet, then all will be okay.



BELGOM round, do as you probably know quite a few miracles, but here's the result, still contains quite a few irremovable scratches, but it can do well by them.



One radgril, yes those of BP, but what would it be white, there should still be fans, or was this out-of-the-box thinking?



Some random shot with all random meuk @ worktable.



Hmmmz that brings brightening, all small windows, of course it is 1 piece of plexiglass, plexiglass dark, gives a nice effect when light comes from within. Below what would sit there in front, you can choose good, the last photo reveals it is, but good ...




Playing with light and mirror of effectjes midplate ...



An LED strip, a picture with the camera in the dark of the wardrobe, this beautiful effect, ow yeah, and you had not yet noticed, the case is back in together stuck with screws which I include for Vendetta ordered, but I was more than abundant ordered dusja, enough for 2 boxes, maybe even 3.



Now comes the bus out of the bag once I said with my head on Sat cafe, but here's the sleeve in the sleeve, PA120.3, one polished normally intended for Vendetta, but he has his place in Duality received this Instead it goes perfectly, 1cm Fri bottom, and a similar amount on top, perfect fit. The radiator brackets are adjusted to what it can take place. The studs on the diagonal piece of the new pump mounts, something found in a box and had just enough, so will the pumps to float, but there is some extra mouse under coated, so I'm sure of a quiet operation of the pumps .



Some gemoffel and see if everything would fit in connection with the fans, I also agree doorgeflusht the wheel yesterday as it was here several months to do nothing and then there is the chance that some debris is not impossible, but Sat anything in the trash.



Another nice night-shot, we see the back of an old friend come back, the RX120 from XSPC, it is located aside, he will ensure the cooling of the motherboard over, and given that up to around 60W would come, it will that really is not a problem for this guy because he has a P35 motherboard + HD4870 has cooled, as he was a bit heavier, but it was not an impossible task for the master. If a fan gets a 1850rpm Scythe Gentle Typhoon, then maybe even 2.

Incidentally, all fans will soon be driven by a mining mCubed fan controller, because there is no room for the front because of the wheel, it comes tomorrow, the stock of Mr. Freddy High Flow.



Today it was time to open the setup to break down a mountain on the picture to your hard drive to say, especially if you know them all in this case midi + fit almost a 100% dual internal water cooling loops.

Also here is my experience with the PA160.1 say, this radiator is really a true beast, throw a cheapo Yate Loon Q9550 @ 4GHz against and I just kept without any problem sub 50 ° C on all cores, while those for the WCG RRTech was doing. So full load. Thanks to Eddy for IT service to those reserved for me to have him and him nogvorens had ordered them to send my last order there, nice surprise.



Here the closet, ready for all the hardware back to nest in its interior.

Thanks for reading and later, this was only part 1, soon come pr0npics, just a little break.

Please do not walk away from your device during commercials, so goes the story once again.


A song for the second part

http://www.youtube.com/watch?v=RbuIGp3kYJg


27/Part2/Pr0nUpdeet Update - 14 April 2010 - Illuminaughty

Advertising is done, so now on to the closet where it is today, how she looks, what it does and this is especially Jambers not.

I warn a moment, this update may cause an increase saliva production cause, so please take a towel under your foot to keep or on your desk to lay before you have your keyboard to pennants helps, if you choose for your keyboard as setting aside , you can post your desktop yet as polishing your drool, this is a less clean method, nevertheless probably equally effective.

Let the show begin with the start of construction, also my sincere apologies for forgetting to take one lot or not essential photographs, where necessary, the text is indented.



Start building, we like Cool Fresh, with a mat on the midplate to scratches and other damage.



Loops begin to form, blue and white theme, as tight as possible, tank placement tryouts, as shown above but not small multiresjes 100 150 pages.



Here it is, beware.
All cables were still connected, but the water cooling could operate as it should, be active is also an appropriate term. The self-made resjes hanging brackets (not that of Plexiglas, the black stuff for the wheel), which is a pain in the ass were to mount. Whether I do well I do not know yet, I wanted as much of the wheel appear to hold because it still has something, but it will be the cable of the lighting in the picture, that we need something longer.



This is what falls from above to see the bling radiator, gpublok, anyway, yes, a lot of bling.





Nice to know what is front hiding.



Slightly higher.



Cable management, which is absolutely not necessary as long as the good old neo he 550 gesleeved is not doing anything and I had to put it so open. The sled I also began to take Cool Fresh for a nice price, already a hoeraatje for him!



And now here is a dry picture, taken with flash, so he stands there 's pretty well, waiting on the sleeve and some "knickknacks" soon to come.

That was it, I hope you enjoyed your night or morning.

"END"