Quote Originally Posted by APC View Post
Thanks

Before i´m tryng 3,8 with lower CPU VCore

CPU Vcore….….......1.2125..........:1.2065

Thanks

A question. I´m confused with

CPU Reference……....0.760V*.......: Auto

MCH/ICH
MCH Core…….....1.100V...........: 1.260V
MCH Reference….0.760V............: Auto
MCH/DRAM Ref.…......0.900V......: Auto

I set CPU Termination…..1.200V*.......: 1.280v and i set this settings as AUTO but is it correct (OK)? Or with AUTO i have too high voltages?

Thanks
1. Set CPU termination to 1.2v
2. Set CPU reference to 0.775, and MCH reference to 0.80
3. set CPU termination to 1.28v (and CPU and MCH reference will change - this is ok)

From here you might be able to get some higher FSB. I hope this is easy to understand now

@Slinwagh - there's a registry edit you can do to enable AHCI, it was posted by bluestang the other day:
http://www.xtremesystems.org/forums/...postcount=6192