Micron D9 GMH\GKX\JKH etc club

[Don_Dan]

PL is 8 for SPi 1M run and 5 for MaxxMem benchmark
500MHz 4-3-2-3-3 PL8 with "loosened" sub-timings only requires 2.35V. In order for me to tight the sub-timings that much I fed them with 2.65V

Bandwidth is indeed low... Can it be 'cause of the chipset ? Because P35 and X48 have tighter internal latencies than X38

Don't think it's because of the chipset, 462 points in MaxxMem is really low.
zsamz_ might be onto something.
Could be a software problem as well though, MaxxMem is a bit buggy sometimes.

when unstable bandwith is lower

True, might be the case here.

yes on 5:6.. i didn't test my fsb wall but i'm sure that my q9400 get 542 (is my max fsb at the moment)

Reaching such high FSB speeds is very hard for the NB, did you try higher volts? Or the NB could be overheating, hard to tell to be honest, can be a lot of things.

[George_o/c]

Don't think it's because of the chipset, 462 points in MaxxMem is really low.
zsamz_ might be onto something.
Could be a software problem as well though, MaxxMem is a bit buggy sometimes

Maybe my score was too low due to the fact I used my custom nLited 90MB Win XP + SP3 OS ? I only use it for SuperPi 1M and PiFast, but I thought: "What the heck, let's also toss MaxxMem in it"

[Don_Dan]

Hm, my MaxxMem runs were also made on a XP with many services disabled, but still, it was a full install. Maybe something's missing or you disabled too many services and other stuff.

[George_o/c]

My XP OS runs only with 8 services enabled It's made for SPi and PiFast only... Maybe that's the reason indeed

[zsamz_]

os has nothin to do with it
anytime memory is unstable on 775 1156 or on i7 you will see lower everest scores
thats how i test its way faster

[Samu 17]

Reaching such high FSB speeds is very hard for the NB, did you try higher volts? Or the NB could be overheating, hard to tell to be honest, can be a lot of things.

i try this settings for 542 fsb:
1.74vcore
1.68pll
1.68vtt
1.62-64nb
ram 2.56max but i don't get over 1214MHz
this settings are very crasy but i'm on air

[Don_Dan]

Those voltages are insane, lower them asap!

NB voltage is way too high ( CPU voltage as well of course ), it will be overheating in no time and might even be damaged already.

[Samu 17]

didn't you know that I entered in the club of crazy overvoltators on air?

[ramfan]

got some new ram
Twin2X2048-9136C5D
need to get my core temps lower
i know this ram do do better
the coolers were still cool to the touch

http://i256.photobucket.com/albums/h...ownage/win.jpg
http://i256.photobucket.com/albums/h...age/pifast.jpg

[Ket]

This thread just won't die! Glad everybody still enjoys it

[Calathea]

Of course it won't. Not as long as there are D9 chips alive!

Tried a funny thing today.. subzero memory







I know that the clocks kind of suck (considering it's d9gmh and I pumped 2.85 volts through it), but this is a old 2x512 kit that barely makes 1200 cl5 I did this just to see if there really was any gains to be had going subzero on ram. On air this kit makes ~550 4-4-4-4 @ 2.5 volt, doesn't scale well with more volt. So I'd say subzero ram is worth it

Oh and about the cooling.. cold spray for 10 min action at -10 to -20°C

[Don_Dan]

This thread just won't die! Glad everybody still enjoys it

This thread will never die!

I still have two kits I never tried, they're still sitting there new and untouched. Both should be rather nice D9, 8500 Ballistix and 8500 Teamgroup.

Of course it won't. Not as long as there are D9 chips alive!

Tried a funny thing today.. subzero memory

Oh and about the cooling.. cold spray for 10 min action at -10 to -20°C

This is really xtreme!

I guess cold spray just isn't really cold enough to see much gain over air, things will be more interesting with dice or ln2.

[pvhk]

cellshock PC8000 C4 D9GKX:

[George_o/c]

This thread will never die!

I still have two kits I never tried, they're still sitting there new and untouched. Both should be rather nice D9, 8500 Ballistix and 8500 Teamgroup.

The ballistix is rather promising, can't wait for your results!

I still got a Teamgroup 1300MHz 6-6-6-18 kit un-tested...

[pvhk]

gskill 8500HK d9gmh:

[kagula323]

don't let this thread dye ... come on quys

I need some settings for high ddr2 oc on Gigabyte EP45-Extreme and with high FSB if posible

10x

[ramfan]

i need moar dryice
amd dont like running ram fast without the cold

[pvhk]

cellshock PC8000 C5 (gkx)

[CpmF]

I found an old Asus P5N-e (nF 650i). My precedent is dead, but the new still live ! 0$ and this :

Corsair Dominator PC9136 @656Mhz 5-5-5-15; 2.51v


It's not better than the other mobo, but i had forgotten such frequency/timings were good to see

The E6600 is quite good too : AM3 @4.8Ghz @-125°

[ramfan]

i can only select trcd/trc 5 and tras 15 when running the 2.66 mem multi
2.35V

[Ket]

Some nice results there guys I'll be trying to revive my D9GMH kit again by chuckin em in the freezer for a couple days - then baking them

[pvhk]

ballistix 5300 d9gmh

[websmile]

Crucial Ballistix 8500 16FD5-one of the only three kits I have left-the one that needs most Voltage at 1300

[Don_Dan]

Hey, I've been waiting for you to post here!

[websmile]

Hey, I've been waiting for you to post here!

I knew- my old TeamXtreem 800Cl3- they are back in germany again, a friend bought them back from Latvia^^-here at 2,22V on a low clock challenge