Thanks for your help guys!

Quote Originally Posted by Hoss331 View Post
You can run PL8 on 2.00D if your using cas4, Ive used it up to ~560fsb for benching but never tried for any bandwidth numbers. The profiles also do a little more than just tighten the sub timings because the bw numbers still go up even when the sub timings are all preset the same for each profile. This is generally only the case with 2x1 kits though as with 2x2 kits theres no difference between standard and turbo. Extreme takes alot of mch to use and only does ~50mbs over turbo so its generally not worth using. If your using a bios newer than F10b you need to switch back to an older one.
I'm on BIOS F9I.
PL8 with 1:1 divider is not worth it, since I couldn't run PL8 at 590MHz anyway, so I can use 2.00B. I don't think it's strap or divider related, both settings I have shown should be over 12k read.

Quote Originally Posted by radaja View Post
what Hoss331 said.i forgot on the ud3p using the 400 strap 1:1 and cas 4
you can run pl8 stable,but if you set cas 5 it wont boot at pl8
it might just net you the triple 12's your looking for
As said above already, 1:1 and cas4 is useless to me, since 400 strap, 560MHz CL4 and PL8 will be worse than 333 strap, 590MHz CL4 and PL9. Don't you agree?