** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[andressergio]

Big congrats Andressergio

thanks mate

[DTV DRAGON]

hello guys1 this is my first post as ive been waiting for over a month to get it so i can post here, anyways I have a ep45t-udl3r and a q9650 and would like to get it stable at 4.0 I think iam at 3.85 but get randon freezes now and then I was wondering if u can have a look at my bios template and see were I might be wrong, any help will be greatly appreciated thanx Dragon
Iam running 8 gig ram as well if you need any other info please tell me sorry for the long post but can someone please tell me how to make my bios template smaller
******Motherboard Intelligent Tweaker (M.I.T.)******

Robust Graphics Booster.........................[ AUTO ]
CPU Clock Ratio.................................[ 9 ]
Fine CPU Clock Ratio............................[ + 0.0 ]
CPU Frequency 4.5GHz............................[ 430x9] 3.87

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 430]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv ]
PCI Express Clock Drive.........................[8 00mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 0ps ]

******DRAM Performance Control******

Performance Enhance.............................[ STANDARD ]

(G) MCH Frequency Latch.........................[ 333]
System Memory Multipler.........................[ 240B ]
Memory Frequency 1333...........................[ 1032 ]
DRAM Timing Selectable..........................[ AUTO ]

CAS Latency Time................................[ 9]
tRCD............................................[ 9]
tRP.............................................[ 9]
tRAS............................................[ 24]

******Advanced Timing Control******

tRRD[4].........................................[ 4]
tWTR[4].........................................[ 5]
tWR[13].........................................[ 10 ]
tRFC[68] .......................................[ 74 ]
tRTP[4].........................................[ Auto ]
Command Rate (cmd)[0]...........................[ Auto ]

******Channel A Timing Settings******

Static tRead Value [ 11 ] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto
Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel A Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Channel B Timing Settings******

Static tRead Value [ 11] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel B Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Motherboard Voltage Control******

Load-Line Calibration...........................[ DISABLED ]
CPU Vcore [ 1.25 ]...................[ 1.2875]
CPU Termination [ 1.20 ]...................[ AUTO ]
CPU PLL [ 1.55]...................[ AUTO]
CPU Reference [ 0.805]...................[ AUTO]

MCH Core [ 1.100 ]...................[ 1.26 ]
MCH Reference [ 0.760 ]...................[ AUTO ]
MCH/DRAM Refernce [ 0.900 ]...................[ Auto ]
ICH I/O [ 1.500 ]...................[ AUTO ]
ICH Core [ 1.100 ]...................[ AUTO]

DRAM Voltage [ 1.5]...................[ 1.64]
DRAM Termination [ 0.900 ]...................[AUTO]
Channel A Ref [ 0.900 ]...................[ DONT HAVE ]
Channel B Ref [ 0.900 ]...................[ DONT HAVE ]

******Advanced BIOS Features******

Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]__________________

[radaja]

DTV DRAGON,welcome.for you bios template to be smaller ,after you copied it and are ready to post
click the Go Advance button below,then on top you will see the # button click it and paste you template
in between the two[CODE] [CODE] things that appear.this will make you template look like this when its posted

******Motherboard Intelligent Tweaker (M.I.T.)******

Robust Graphics Booster.........................[ AUTO ]
CPU Clock Ratio.................................[ 9 ]
Fine CPU Clock Ratio............................[ + 0.0 ]
CPU Frequency 4.5GHz............................[ 430x9] 3.87

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 430]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv ]
PCI Express Clock Drive.........................[8 00mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 0ps ]

******DRAM Performance Control******

Performance Enhance.............................[ STANDARD ]

(G) MCH Frequency Latch.........................[ 333]
System Memory Multipler.........................[ 240B ]
Memory Frequency 1333...........................[ 1032 ]
DRAM Timing Selectable..........................[ AUTO ]

CAS Latency Time................................[ 9]
tRCD............................................[ 9]
tRP.............................................[ 9]
tRAS............................................[ 24]

******Advanced Timing Control******

tRRD[4].........................................[ 4]
tWTR[4].........................................[ 5]
tWR[13].........................................[ 10 ]
tRFC[68] .......................................[ 74 ]
tRTP[4].........................................[ Auto ]
Command Rate (cmd)[0]...........................[ Auto ]

******Channel A Timing Settings******

Static tRead Value [ 11 ] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto
Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel A Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Channel B Timing Settings******

Static tRead Value [ 11] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel B Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Motherboard Voltage Control******

Load-Line Calibration...........................[ DISABLED ]
CPU Vcore [ 1.25 ]...................[ 1.2875]
CPU Termination [ 1.20 ]...................[ AUTO ]
CPU PLL [ 1.55]...................[ AUTO]
CPU Reference [ 0.805]...................[ AUTO]

MCH Core [ 1.100 ]...................[ 1.26 ]
MCH Reference [ 0.760 ]...................[ AUTO ]
MCH/DRAM Refernce [ 0.900 ]...................[ Auto ]
ICH I/O [ 1.500 ]...................[ AUTO ]
ICH Core [ 1.100 ]...................[ AUTO]

DRAM Voltage [ 1.5]...................[ 1.64]
DRAM Termination [ 0.900 ]...................[AUTO]
Channel A Ref [ 0.900 ]...................[ DONT HAVE ]
Channel B Ref [ 0.900 ]...................[ DONT HAVE ]

******Advanced BIOS Features******

Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]__________________

now i would recommend not using auto for any of your voltages
while overclocking.as the board will set voltage very high.
like vtt and pll.
try setting these voltages for that OC ok?

Load-Line Calibration...........................[ enabled]
CPU Vcore [ 1.25 ]...................[ 1.30v]
CPU Termination [ 1.20 ]...................[ 1.22v]
CPU PLL [ 1.55]...................[ 1.57v]
CPU Reference [ 0.805]...................[ normal]

MCH Core [ 1.100 ]...................[ 1.30v ]
MCH Reference [ 0.760 ]...................[ normal ]
MCH/DRAM Refernce [ 0.900 ]...................[ normal ]
ICH I/O [ 1.500 ]...................[ normal ]
ICH Core [ 1.100 ]...................[ normal]

DRAM Voltage [ 1.5]...................[ 1.64]
DRAM Termination [ 0.900 ]...................[normal]

if this works we can start lowering voltages.keep us posted.

***********************************

[DTV DRAGON]

a realy big thankyou for your help, I will try this out and post back as to how it goes, Ive beem waiting s o long to get so I can post here, so Iam very greatfull for your help

[radaja]

my pleasure.good luck

[DTV DRAGON]

ok did what you said but on the cpu pll you said tho go from 1.55 to 1.57... well my next option from 1.55 is 1.65...is that alright or too high, inawhile i will run a few stress tests etc, but please let meknow what i should do with the cpu pll thanx

[Dumaine]

UD3P v1.6 new BIOS (FE) Improve memory compatibility hit yesterday

http://www.giga-byte.com/Support/Mot...ver=#anchor_os

[cincyrob]

UD3P v1.6 new BIOS (FE) Improve memory compatibility hit yesterday

http://www.giga-byte.com/Support/Mot...ver=#anchor_os

i was just getting ready to ask about the FD bios for v1.6 im thinking it might be whats keeping me from getting a higher OC. 3.83ghz is about the max i can get stable and i know this board(older versions) along with the Q9550 EO can get higher. i was gonna ask if i should role back to FB bios and try that. but i think i will do some reading on the FE bios first... has anyone tried this yet?

[Dumaine]

looks like you and I in the same boat......I just tried it and I still gotta work with it more...Im wondering if its these 1200 Tridents holding me back. Although I checked in at 4.050 with memory at 1267 relaxed timings to 6-6-6-18. I could always drop the memory some but I just wanted to see what I could do at 1200 or better,

edit.....on a Q9550 also at 3.833 24/7 without any problem at all

edit....speaking of that I just might go back to FB myself, honestly dont know why I changed it lol

[Dumaine]

guess I will play with this later on ( this is on FE)

[Dumaine]

i was just getting ready to ask about the FD bios for v1.6 im thinking it might be whats keeping me from getting a higher OC. 3.83ghz is about the max i can get stable and i know this board(older versions) along with the Q9550 EO can get higher. i was gonna ask if i should role back to FB bios and try that. but i think i will do some reading on the FE bios first... has anyone tried this yet?

I just went back to FB and low and behold I locked right in at 4.003 with memory @1256 5-5-5-15 gonna stress test it in the morning cuz Im kinda tired now!

[In-Fluence]

I'm also starting to think that FB might still be the best one. The only annoying thing about it is the lack of quickboot option and is left disabled. This hides the board info from CPU-Z and messes with the experience index I also had to re-authorise W7 and reinstall the futuremark software due to sysinfo errors.

So far FE has not proved to be any better than FD but I've still got a few things to try before I consider going back.

Still waiting for the dam backplate for my apogee XT which has been sitting here for a fair while. They never advertised the fact they don't ship the 775 backplate to europe, so I had to contact some german store who then ship on their behalf. Honestly, purchasing hardware for the past year has been such hard work 90% of the time, with either delivery/stock/rma issues!

I'll get there in the end!

[Dumaine]

I'm also starting to think that FB might still be the best one. The only annoying thing about it is the lack of quickboot option and is left disabled. This hides the board info from CPU-Z and messes with the experience index I also had to re-authorise W7 and reinstall the futuremark software due to sysinfo errors.

So far FE has not proved to be any better than FD but I've still got a few things to try before I consider going back.

Still waiting for the dam backplate for my apogee XT which has been sitting here for a fair while. They never advertised the fact they don't ship the 775 backplate to europe, so I had to contact some german store who then ship on their behalf. Honestly, purchasing hardware for the past year has been such hard work 90% of the time, with either delivery/stock/rma issues!

I'll get there in the end!

Its funny that you mention that because FB was totally fine for me, it was FD that hid the mobo from CPUZ and messed with the WEI.........very interesting! FD also makes the readings in CPUID Hardware Monitor read weird (LLC enabled and the +12v either reads .070 or it totally dissapears, and also removes it completely from OCCT)

[DTV DRAGON]

ok here is my bios setup as to what radaja told me to do ,Since changing a few things Ive had no freezes or random reboots.Now Iam at 3.9 and want to take it to 4.0 for 24/7 use, does it look right with the settings now so i can do that?or are there other changes that should be made, I realy want to thank you guys for any help that may be given as Iam still old school p4 days lol

******Motherboard Intelligent Tweaker (M.I.T.)******

Robust Graphics Booster.........................[ AUTO ]
CPU Clock Ratio.................................[ 9 ]
Fine CPU Clock Ratio............................[ + 0.0 ]
CPU Frequency ............................[ 435x9] 3.91       

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 435]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv ]
PCI Express Clock Drive.........................[8 00mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 0ps ]

******DRAM Performance Control******

Performance Enhance.............................[ STANDARD ]

(G) MCH Frequency Latch.........................[ 333]
System Memory Multipler.........................[ 240B ]
Memory Frequency 1333...........................[ 1032 ]
DRAM Timing Selectable..........................[ AUTO ]

CAS Latency Time................................[ 9]
tRCD............................................[ 9]
tRP.............................................[ 9]
tRAS............................................[ 24]

******Advanced Timing Control******

tRRD[4].........................................[ 4]
tWTR[4].........................................[ 5]
tWR[13].........................................[ 10 ]
tRFC[68] .......................................[ 74 ]
tRTP[4].........................................[ Auto ]
Command Rate (cmd)[0]...........................[ Auto ]

******Channel A Timing Settings******

Static tRead Value [ 11 ] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto
Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel A Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Channel B Timing Settings******

Static tRead Value [ 11] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel B Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Motherboard Voltage Control******

Load-Line Calibration...........................[ENABLED]
CPU Vcore [ 1.25 ]...................[ 1.30]
CPU Termination [ 1.20 ]...................[ 1.26]
CPU PLL [ 1.55]...................[ 1.57]
CPU Reference [ 0.805]...................[ NORMAL]

MCH Core [ 1.100 ]...................[ 1.30 ]
MCH Reference [ 0.760 ]...................[ NORMAL ]
MCH/DRAM Refernce [ 0.900 ]...................[ NORMAL]
ICH I/O [ 1.500 ]...................[ NORMAL ]
ICH Core [ 1.100 ]...................[ NORMAL]

DRAM Voltage [ 1.5]...................[ 1.64]
DRAM Termination [ 0.900 ]...................[NORMAL]
Channel A Ref [ 0.900 ]...................[ DONT HAVE ]
Channel B Ref [ 0.900 ]...................[ DONT HAVE ]

******Advanced BIOS Features******

Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]__________________

[radaja]

have you tried upping the fsb to 445 and see what happens?if it boots up into windows
try running prime95 and see what happens.

[DTV DRAGON]

have you tried upping the fsb to 445 and see what happens?if it boots up into windows
try running prime95 and see what happens.

no but i have some time now so I will do just that! I will need to download prime95 as Iam pretty sure i dont have it, so I will try what you suggest and then post back later tonight thanx as always!!

[Raffaele2521]

hello, I want to overclock my system and be stable at 467 x 9 .... tell me how to set my voltages?
thank you very much

[radaja]

@DTV DRAGON
when you get prime95 start with small fft's to find your optimal vcore.
if it runs ok for 1-2 hrs then try dropping the vcore until prime95 fails.
then upp the vcore 1-2 notches from the vcore that failed.then run blend
and see if you can do 1-2 hrs.then you can start lowering other voltages
tofind what you setup needs for 9x445@4005 ok ?

hello, I want to overclock my system and be stable at 467 x 9 .... tell me how to set my voltages?
thank you very much

@Raffaele2521,your going to have to lets us know more info,like what cpu and what ram your using
for us to help ok?

[DTV DRAGON]

thanx radaja...I will do that thanzx for your help!

[Raffaele2521]

@Raffaele2521,your going to have to lets us know more info,like what cpu and what ram your using
for us to help ok?

I have a UD3P rev 1.1, Q9650 vid 1.25 V, 4x2gb of ram pc2-8000 5-5-5-15 2.0 V - 2.1 V ...

I would like to get to 4.2 ghz ...
My voltages are above ... what should I change?
thanks

[radaja]

since your running 8GB of ram i would try this for 9x467@4203


Motherboard Voltage Control
Loadline Calibration.....................: enabled
CPU Vcore................1.250V*.........:1.35v you might need more or less
CPU Termination......... 1.200V*.........:1.26v
CPU PLL..................1.500V*.........:1.57v
CPU Referen..............0.760V*.........:normal
MCH/ICH
MCH Core.................1.100V..........:1.36v
MCH Reference............0.760V..........:normal
MCH/DRAM Ref.............0.900V..........:normal
ICH I/O..................1.500V..........:normal
ICH Core.................1.100V..........:normal
DRAM
DRAM Voltage.............1.800V..........:2.10v or whatever your ram needs
DRAM Termination.........0.900V..........:normal
Channel A Reference......0.900V..........:normal
Channel B Reference......0.900V..........:normal

if this doesnt work we may need to find your optimal mch reference setting.
keep us posted

[Raffaele2521]

since your running 8GB of ram i would try this for 9x467@4203


Motherboard Voltage Control
Loadline Calibration.....................: enabled
CPU Vcore................1.250V*.........:1.35v you might need more or less
CPU Termination......... 1.200V*.........:1.26v
CPU PLL..................1.500V*.........:1.57v
CPU Referen..............0.760V*.........:normal
MCH/ICH
MCH Core.................1.100V..........:1.36v
MCH Reference............0.760V..........:normal
MCH/DRAM Ref.............0.900V..........:normal
ICH I/O..................1.500V..........:normal
ICH Core.................1.100V..........:normal
DRAM
DRAM Voltage.............1.800V..........:2.10v or whatever your ram needs
DRAM Termination.........0.900V..........:normal
Channel A Reference......0.900V..........:normal
Channel B Reference......0.900V..........:normal

if this doesnt work we may need to find your optimal mch reference setting.
keep us posted

Ok test your vooltaggi? but have a core mch so high, it is not perficoloso for the motherboard?
processor holds with 1.325 v ... !
thanks

[radaja]

its not too high for a quad core.after you get it somewhat stable we can then fine tune it
and start lowering voltages to the minimum needed ok?if your worried you can add a small 40mm fan over the NB heatsink.
i only needed one when i was doing 500fsb and higher with 1.40v-1.46v vNB.

[Raffaele2521]

its not too high for a quad core.after you get it somewhat stable we can then fine tune it
and start lowering voltages to the minimum needed ok?if your worried you can add a small 40mm fan over the NB heatsink.
i only needed one when i was doing 500fsb and higher with 1.40v-1.46v vNB.

septum ok like you said ... Try setting the ram to 2.0 v ...

I'm sorry but I do not know English well and I'm using the translator of google ...

Now set your voltages and text linx or prime95?

[radaja]

use prime 95 small fft's first to see if you vcore is high enough for that OC
keep an eye on your temps make sure you cooling is keeping up with the OC
if it run for 1hour then try lowering your vcore one notch and try again.
P.S your english is fine.