Originally Posted by
FrenchPcdiga
Hello, i did f6x bios today, everithing fine, 4.2 1.25v stable, but i can't get more then 211 bclk, the pc doesn't give any image, i've already try with another multi, but always give me the same, black screen! It is possible to fix this problem?
F6x is not the last bios?! F6a last one?! A before X, i'm not understanding.
My bios config is this one:
GIGABYTE GA-X58A-UD7 - bios F6x
MB Intelligent Tweaker(M.I.T.)
Advanced CPU Features {Press Enter]
CPU Clock Ratio............................: 21
CPU Frequency .....(Ghz)...................:4.2
Intel(R) Turbo Boost Tech..................:[Disabled]
CPU Cores Enabled..........................:[All]
CPU Multi Threading........................:[Enabled]
CPU Enhanced Halt (C1E)....................:[Enabled]
C3/C6/C7 State Support.....................:[Disabled]
CPU Thermal Monitor........................:[Enabled]
CPU EIST Function..........................:[Enabled]
Bi-Directional PROCHOT.....................:[Enabled]
Virtualization Technology..................:[Enabled]
Uncore & QPI Features [Press Enter]
QPI Clock Ratio*...........................:36
QPI Link Speed* ......................(Ghz):7.20
Uncore Clock Ratio.........................:x17
Uncore Frequency......................(Mhz):3,400
Isochronous Support........................:[Enabled]
Advanced Clock Control [Press Enter]
>>>>>Standard Clock Control
Base Clock (BCLK) Control*.................:[Enabled]
BCLK Frequency (Mhz)*......................:200
PCI Exxpress Frequency (Mhz)...............:105
>>>>>Standard Clock Control
CPU Clock Drive (mV).......................:700
PCI Express Clock Drive (mV)..............:700
CPU Clock Skew (ps)........................:0
IOH Clock Skew (ps)........................:0
Advanced Dram Features [Press Enter}
Performance Enhance........................:[Turbo]
Extreme Memory Profile (X.M.P.)............:[Disabled]
System Memory Multiplier (SPD).............:x8
Memory Frequency (Mhz).....................:1,600
DRAM Timing Selectable (sPD) ..............:[Quick]
Channel Interleaving.............................:6
Rank Interleaving.................................:4
Channel A Timing Settings Sub Menu [Press Enter]
>>>>>Channel A Standard Timing Control
Cas Latency Time.............................:7
tRCD.........................................:7
tRP..........................................:7
tRAS.........................................:19
>>>>>Channel A Advanced Timing Control
tRC..........................................:27
tRRD ........................................:4
tWTR ........................................:5
tWR..........................................: 8
tWTP.........................................:[Auto] 19
tWL..........................................:[Auto] 7
tRFC.........................................: 60
tRTP.........................................:4
tFAW.........................................: [Auto]
Command Rate (CMD) .....................:1
>>>>>Channel A Misc Timing Control
B2B CAS Delay................................:[Auto]
Round Trip Latency...........................:[Auto]
Channel A Turnaround Setting [Press Enter]
>>>>> Channel A Reads Followed By Reads
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................: [Auto]
>>>>> Channel A Writes Followed By Writes
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................:[Auto]
Channel B Timing Settings Sub Menu [Press Enter]
>>>>>Channel B Standard Timing Control
Cas Latency Time.............................:7
tRCD.........................................:7
tRP..........................................:7
tRAS.........................................:19
>>>>>Channel B Advanced Timing Control
tRC..........................................:27
tRRD ........................................:4
tWTR ........................................:5
tWR..........................................: 8
tWTP.........................................:[Auto] 19
tWL..........................................:[Auto]7
tRFC.........................................: 60
tRTP.........................................:4
tFAW.........................................: [Auto]
Command Rate (CMD) ..........................:1
>>>>>Channel B Misc Timing Control
B2B CAS Delay................................:[Auto]
Round Trip Latency...........................: [Auto]
Channel B Turnaround Setting [Press Enter]
>>>>> Channel B Reads Followed By Reads
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................: [Auto]
>>>>> Channel B Writes Followed By Writes
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................:[Auto]
Channel C Timing Settings Sub Menu [Press Enter]
>>>>>Channel C Standard Timing Control
Cas Latency Time.............................:7
tRCD.........................................:7
tRP..........................................:7
tRAS.........................................:19
>>>>>Channel C Advanced Timing Control
tRC..........................................:27
tRRD ........................................:4
tWTR ........................................:5
tWR..........................................: 8
tWTP.........................................:[Auto]
tWL..........................................:[Auto]
tRFC.........................................: 60
tRTP.........................................:4
tFAW.........................................: [Auto]
Command Rate (CMD) ..........................:1
>>>>>Channel C Misc Timing Control
B2B CAS Delay................................:[Auto]
Round Trip Latency...........................: [Auto]
Channel C Turnaround Setting [Press Enter]
>>>>> Channel C Reads Followed By Reads
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................: [Auto]
>>>>> Channel C Writes Followed By Writes
Different DIMMs..............................: [Auto]
Different Ranks..............................: [Auto]
On The Same Rank.............................:[Auto]
Advanced Voltage Control [Press Enter]
>>>>CPU Voltages
LoadLine Calibration.........................:[Level 2]
CPU Vcore....................................:1.25000v
QPI/VTT Voltage..............................:1.375v
CPU PLL......................................: 1.840v
>>>>>MCH/ICH Voltrage
PCIE.........................................: 1.54v
QPI PLL......................................: 1.22v
IOH Core.....................................:1.18v
ICH I/O......................................: 1.50v
ICH Core.....................................:1.14v
>>>>>Dram
DRAM Voltage.................................:1.60v
DRAM Termination.............................: [Auto]
Ch-A Data Vref...............................:[Auto]
Ch-B Data Vref...............................:[Auto]
Ch-C Data VRef...............................:[Auto]
Ch-A Address Vref............................:[Auto]
Ch-B Address Vref............................:[Auto]
Ch-C Address VRef............................: [Auto]
My hardware:
GA-X58A-UD7 - F6x
I7 920@4.2 1.25v
Gskill F3-12800CL8T-6GBPI
XFX 850W Black Edition
Corsair H50
Gigabyte ATI 4870 1gb - gv-r487d5-1gd
Reply With Quote
Bookmarks