#1
OCTeamHungary™
Join Date: Sep 2006
Location: Hungary
Posts: 509
[OCTH] G.Skill F3-12800CL8T-6GBPI-B
Hey guys, I did a short test of my new G.Skill F3-12800CL8T-6GBPI-B kit. Don't care about Pi times. Test was about to stability. ddr3-1850 8-9-8-21-1T @ ~1.66v ddr3-2000 9-9-8-21-1T @ ~1.66v ddr3-2000 8-9-8-21-1T @ ~1.84v And at last some photos about the kit: We all know there will be better Tri-Channel kits on the market but till that time this kit is not that bad
Last edited by jugeen; 12-29-2008 at 11:18 PM .
#2
Xtreme Member
Join Date: Jul 2007
Location: Inside a floppy drive
Posts: 258
Thanks for the mini-review jugeen
. Nice numbers.
Im waiting for this memory kit to mount my 920 in the DFI.
Did you try 900 with the stock timings?
__________________
Core i7 980X | EVGA X58 3xSLI Classified | 3x2Gb Corsair Dominator GT 2000 CL8 | Asus 5970 2GB 950-1250 | Intel X25 G2 160Gb | Enermax Revolution 1050WCore i3 540/Zotac H55-ITX/2x2GB Gskill ECO 1333/Seagate Barracuda 1TB/Silverstone SG06B/Samsung PS50C550 50"
Last edited by Dami3n; 12-29-2008 at 06:22 PM .
#3
Xtreme Member
Join Date: Dec 2007
Location: Ulsan, Korea
Posts: 101
Nice kit, bro~
I will post my kit at tomorrow~
#4
OCTeamHungary™
Join Date: Sep 2006
Location: Hungary
Posts: 509
Quote:
Originally Posted by
Dsjjang
Nice kit, bro~
I will post my kit at tomorrow~
thx! waiting for your results!
Quote:
Originally Posted by
Dami3n
Thanks for the mini-review jugeen
. Nice numbers.
Im waiting for this memory kit to mount my 920 in the DFI.
Did you try 900 with the stock timings?
[b][i]thx!
here you go
ddr3-1800 8-8-8-21-1T @ ~1.63v
Last edited by jugeen; 12-29-2008 at 11:17 PM .
#5
Memory Addict
Join Date: Aug 2002
Location: Brisbane, Australia
Posts: 11,625
nice.. this board loves ram
Got a 1000mhz 8-8-8-21 run to compare with the others ?
#6
OCTeamHungary™
Join Date: Sep 2006
Location: Hungary
Posts: 509
Quote:
Originally Posted by
eva2000
nice.. this board loves ram
Got a 1000mhz 8-8-8-21 run to compare with the others ?
not yet, but i will
#7
OCTeamDenmark Staff
Join Date: May 2004
Location: OCTeamDenmark.Com :D
Posts: 2,350
Great Job jurgeen my freind
Thx for sharing with us
__________________
OCTeamDenmark.com
#8
"Xtreme pwnage"
Join Date: Feb 2005
Location: Copenhagen, Denmark
Posts: 3,239
Looks good Gabor, is the PCB as thin as it looks? A bit shocking to me...
__________________
Competition ranking;
2005;
Netbyte , Karise/Denmark #1 @ PiFast
2008;
AOCM II , Minfeld/Germany #2 @ 01SE/AM3/8M
2009;
AMD-OC , Viborg/Denmark #2 @ max freq
Gigabyte TweaKING , Paris/France #4 @ 32M/01SE
2010:
Gigabyte P55 , Hamburg/Germany #6 @ wprime 1024/SPI 1M
AOCM III , Minfeld/Germany #6 @ 01SE/AM3/1M/8M
#9
TEAM ODOC
Join Date: Aug 2006
Location: Copenhagen - Denmark
Posts: 2,076
thx for posting my friend, glad to see you got the dfi and your kit
it looks promising, they are for sure HCF0s huh
keep pushing it
#10
Xtreme Addict
Join Date: Feb 2008
Location: Buffalo, NY
Posts: 1,616
nice results! what are the max cas 9 clocks?
__________________
PURE benching, teamwork, determination, skill, dedication.
#11
Xtreme Member
Join Date: Jul 2007
Location: Inside a floppy drive
Posts: 258
Quote:
Originally Posted by
jugeen
ddr3-1800 8-8-8-21-1T @ ~1.63v
Great!
Thanks jugeen
__________________
Core i7 980X | EVGA X58 3xSLI Classified | 3x2Gb Corsair Dominator GT 2000 CL8 | Asus 5970 2GB 950-1250 | Intel X25 G2 160Gb | Enermax Revolution 1050WCore i3 540/Zotac H55-ITX/2x2GB Gskill ECO 1333/Seagate Barracuda 1TB/Silverstone SG06B/Samsung PS50C550 50"
#12
Xtreme Member
Join Date: Dec 2007
Location: Ulsan, Korea
Posts: 101
My kit arrived today~
32M PI passed DDR3 2000 8-8-7-20 1T with 1.75v~
Sub timming all auto and Vista 64Bit~
But R2E is so crappy at high mem clock, yet~
#13
Xtreme Addict
Join Date: Feb 2008
Location: The Future
Posts: 1,715
Nice sticks
__________________
Intel E8400 500x9MHz @1,37V LinX 64bit mode stable Asus Maximus II Formula 2302 Bios OCZ OCZ2B1200LV4GK 4GB 1200MHz /5-5-5-15/PL8/1,8V Seagate RAID0 2x Barracuda 7200.12 500GbXFX HD5870 1GB 1000/5000 MHzLG W2486L + Iiyama ProLite E1902SThermaltake Xaser VI BWSSeasonic M12-700 WattsM-Audio Audiophile 192Liquid Cooling System : Swiftech Apogee XT, Swiftech MCW-NBMAX NorthbridgeEK Water Blocks EK-FC5870 Acetal+Nickel with EK-FC5850/5870 RAM BackplateThermoChill PA120.3, Laing 12V DDC-1Plus, XSPC Laing DDC Reservoir Top, Scythe Kaze Master Ace 5,25''Arctic Cooling MX-3, 3x Scythe S-FLEX "F", 3x Scythe Gentle Typhoon "15", 2x 140mm Noiseblocker NB-BlackSilentPRO PK3
#14
OCTeamHungary™
Join Date: Sep 2006
Location: Hungary
Posts: 509
#15
Xtreme Addict
Join Date: Feb 2008
Location: Buffalo, NY
Posts: 1,616
Quote:
Originally Posted by
jugeen
Nice
__________________
PURE benching, teamwork, determination, skill, dedication.
#16
OCTeamHungary™
Join Date: Sep 2006
Location: Hungary
Posts: 509
ddr3-2050 9-9-8-21-1T @ ~1.71v
Last edited by jugeen; 01-01-2009 at 04:41 AM .
#17
Xtreme Member
Join Date: Jan 2004
Location: 407, Florida
Posts: 249
Damn this is some nice ram! Not too expensive either..
This stuff right?
http://www.newegg.com/Product/Produc...82E16820231238
Show me moar!!
__________________
Build in progress.
Foxconn Bloodrage | Core i7 920 True Extreme | 3x2GB Corsair Dominators pc12800 | Zotac GTX 285 AMP! | (4) WD Black 640gb | Cooler Master 690 w/ Med Speed Yate Loons.
My Heat
http://heatware.com/eval.php?id=25800
#18
Xtreme Enthusiast
Join Date: Mar 2005
Posts: 542
Actually you guys should check the OCZ DDR3 Platinum 1333Mhz @ 7-7-7.
I own the 3GB model and at 7-7-7-18 1T, 1.64v I was able to run them at 1650Mhz.
Going up to 8-8-8-18 1T, 1.64v I was able to run them on 1850Mhz, I stopped there as it seems my mem controller (uncore) doesn't like high speed ram
I think this babies can run at 2000Mhz 9-9-9 or even less at stock voltages.
With some voltage increase they can probably do the 2000Mhz@7-8-7 magic numbers
__________________
PC WaterCooling Q² Project by The-Fox CPU Loop : Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4GPU Loop : EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3
#19
Xtreme Member
Join Date: Dec 2007
Location: Ulsan, Korea
Posts: 101
PI Black PC3 12800 is very good mem among HCF0~
#20
Xtreme Member
Join Date: Jul 2007
Location: Inside a floppy drive
Posts: 258
My kit sucks. I flashed my dfi with 01/06 beta and im trying to load windows at 1800 8-8-8-21 1,65v with 150x12, with vtt at 1,5v, an nothing. Bad luck
EDIT-Playing with ram slots 1800 FTW,
__________________
Core i7 980X | EVGA X58 3xSLI Classified | 3x2Gb Corsair Dominator GT 2000 CL8 | Asus 5970 2GB 950-1250 | Intel X25 G2 160Gb | Enermax Revolution 1050WCore i3 540/Zotac H55-ITX/2x2GB Gskill ECO 1333/Seagate Barracuda 1TB/Silverstone SG06B/Samsung PS50C550 50"
Last edited by Dami3n; 01-18-2009 at 06:47 PM .
#21
Xtreme Enthusiast
Join Date: Mar 2005
Posts: 542
Very nice sticks, I am about to get this kit for a review this week.
__________________
PC WaterCooling Q² Project by The-Fox CPU Loop : Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4GPU Loop : EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3
#22
Xtreme Member
Join Date: Jul 2007
Location: Inside a floppy drive
Posts: 258
Jugeen, what settings are you using to boot at 2000 cl9 1,66v?
__________________
Core i7 980X | EVGA X58 3xSLI Classified | 3x2Gb Corsair Dominator GT 2000 CL8 | Asus 5970 2GB 950-1250 | Intel X25 G2 160Gb | Enermax Revolution 1050WCore i3 540/Zotac H55-ITX/2x2GB Gskill ECO 1333/Seagate Barracuda 1TB/Silverstone SG06B/Samsung PS50C550 50"
#23
Xtreme Enthusiast
Join Date: Mar 2005
Posts: 542
A nice set of ram I must say.
2100 Mhz @ 9-9-9-24 1.8v seems to be the limit for benches like Super Pi/PiFast.
Not too bad:
__________________
PC WaterCooling Q² Project by The-Fox CPU Loop : Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4GPU Loop : EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3
#24
OCTeamHungary™
Join Date: Sep 2006
Location: Hungary
Posts: 509
Quote:
Originally Posted by
Dami3n
Jugeen, what settings are you using to boot at 2000 cl9 1,66v?
i didn't use different settings for boot. settings you can see above were my boot settings.
#25
Xtreme Member
Join Date: Jul 2007
Location: Inside a floppy drive
Posts: 258
I tested my kit with 1,35-1,5 vtt, 166x20 and dram x12, with 200x16 and dram 10x, and nothing, i can load windows at 1900 9-9-9-24 but not at 2000 9-9-9-24 1,66v.
__________________
Core i7 980X | EVGA X58 3xSLI Classified | 3x2Gb Corsair Dominator GT 2000 CL8 | Asus 5970 2GB 950-1250 | Intel X25 G2 160Gb | Enermax Revolution 1050WCore i3 540/Zotac H55-ITX/2x2GB Gskill ECO 1333/Seagate Barracuda 1TB/Silverstone SG06B/Samsung PS50C550 50"
Thread Tools
Display Modes
Rate This Thread
Linear Mode
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
All times are GMT -8. The time now is 08:34 AM .
. Nice numbers.
Linear Mode
