New Memory Tweaker for Intel Chipsets

[Cumulonimbus]

=> Chike: use this version: MemSet41.zip.

=> Cumulonimbus: enable EIST and C1E; if it's works, the best is to have these enabled in your bios.

i know, but i need a very flexible solution for different situations to control
via Shell-Script.

CPU-Tweaker.exe /EIST=ON/OFF
CPU-Tweaker.exe /C1E=ON/OFF
CPU-Tweaker.exe /TURBO=ON/OFF
CPU-Tweaker.exe /MULTI=x

and all combined

Regards,
Cb

[mk-ultra]

i know, but i need a very flexible solution for different situations to control
via Shell-Script.

CPU-Tweaker.exe /EIST=ON/OFF
CPU-Tweaker.exe /C1E=ON/OFF
CPU-Tweaker.exe /TURBO=ON/OFF
CPU-Tweaker.exe /MULTI=x

and all combined

Regards,
Cb

i think i see what you mean

there was a program that could do that on amd64 and older platform called crystalCPUID
who would control multiplier/vcore according to the CPU's % of utilization, but i guess it's a bit far from this app origin.

I'd love to see some kind of profiles with multi and vcore stored in it, so you can use for example: night mode, full power mode and a 2d mode.
EIST is way too sensible, keeps going up and down and doesn't control vcore when oced

[DarthBane]

Is there any chance of memset supporting the Poulsbo chipset (Intel SCH US15W). I would really appreciate if the developer did so (would gladly donate to help if this is done). Since the gma 500 graphics uses the system ram, lowering the timings will greatly help the crappy gma 500.

[Cumulonimbus]

i know, but i need a very flexible solution for different situations to control
via Shell-Script.

CPU-Tweaker.exe /EIST=ON/OFF
CPU-Tweaker.exe /C1E=ON/OFF
CPU-Tweaker.exe /TURBO=ON/OFF
CPU-Tweaker.exe /MULTI=x

and all combined

Regards,
Cb

Hello Felix,

i will ask you again for include this futures in Future, specialy for the C1E- and EIST Switch. :-)

If i enable C1E and EIST in the BIOS, the Performance of SSD's drops down
around >23% (tested on some hardware magazines, Toms Hardware etc.).

I use a Programm to detect if a user are on the PC or not. If not, i can
execute some Programms with my tool. Now, if a user are not on the PC
for a while (programmable Time), this Scheduler executes your CPU- Tweaker
with /C1E=ON, the vCore drops and reduce the Power consumtion. If the
User comes back to the PC, my Tool execute your Tool with /C1E=Off and
the full Performance on some SSD's are back. In combination with /EIST=ON/OFF,
it's possibile to reduce Temperature and Power consumption more than a bit on a
System, that are runnig 24/7/52. Powerconsumtion drops with EIST=ON round
about 30 WATTS or a bit more on my w3520.

The biggest winning Situation are on the Road, if the used Mainboard
are supports this -DVID Feature (Dynamik vCore) on overclocked Systems
,like the Gigabyte GA-X58-UD7 or others who uses DVID.

I will you donate 10€ 100%, if this Future are available in Futures.
This Features safes Power costs without loosing need max. Performance.

Will be happy, if there are a Tool, where can set C1E and EIST from comannd line.

Best regards