Quote Originally Posted by brooklynzoo81 View Post
Things have now changed a bit on my main PC. I got the Corsair H50 with dual fans, and installed it today. Temps seemed to have went down from what they where before. On the stock fan i was doing 135F only on idle alone. Now i am doing about 111F on idle. I ran those test from what you can see in the pic's. I am for now running at stock speeds, along with memory (Corsair XMS3 6 GB 1600mhz). Let me know what settings I can try and where I can take this beast, lol. Thanks again.


Well good move on your cooling upgrade . Your now around 43c at idel with stock settings . Lets try for 4.0Ghz first . Go with a x20 ratio & 200 BCLK & core voltage lets use 1.40v . Run LinX 20 times using all memory . If you fail LinX bump up the core voltage to 1.4375v and run LinX again . Watch your temps while LinX is running and report back with results . If temps look good we will push for more and then when you reach your max safely and stable we will fine tune that core voltage .