<Project> Black Freighter </Project>

[callen_1]

c'mon cap'n stop stalling and show us the goods, i need my fix

[Wezly]

Dude, the red supreme is nice.

I am strongly considering having all my future blocks replaced with custom-made acrylic tops.

[shazza]

You know - I still can't decide if I like that red EK supreme or not ... I think it would look great with custom red EK full cover GPU blocks, but otherwise - dunno?

Come on, Cpt. - we're getting antsy to see more. Don't be slacking off now (said tongue in cheek)! Fantastic work so far.

(and, just what exactly is a reckless exclamation mark???)

[CptDreadFlint]

This build is absolutely amazing, and I wish I had a 10th of the photography skills you do!

Very nice work

Thanks so much .:R32! Very much appreciate the kind feedback.

c'mon cap'n stop stalling and show us the goods, i need my fix

Very strange. I was going to post the same exact message to your log.
Word for word!
Wait.
Except replace "cap'n" with "callen".

That's so freaky.

Dude, the red supreme is nice.

I am strongly considering having all my future blocks replaced with custom-made acrylic tops.

I'm a fan of the Red Sumpreme. Your pics in your log had me sold!

You know - I still can't decide if I like that red EK supreme or not ... I think it would look great with custom red EK full cover GPU blocks, but otherwise - dunno?

Come on, Cpt. - we're getting antsy to see more. Don't be slacking off now (said tongue in cheek)! Fantastic work so far.

(and, just what exactly is a reckless exclamation mark???)

The acrylic look in general took a little growing on me. But working on it so much in this build made me a fan.
But I have a suggestion for you, shazza.
Buy the red EK supreme now (I think it'll look amazing in your build), and question later.
If you still don't feel it, you can always use it as a testing block.
Isn't that your usual M.O.? Heh.

Lolz...you know when you type whilst excited, yeah? Like in "OH!!!! MY!!!! GOD!!!!"

See? Reckless.

[CptDreadFlint]

Hi all!

Thought I'd post a small update showing my adventures with pass-through fittings.

This is the "proper" way to use pass-through fittings (pardon to those who are privy):

First, I drill down to 13/16 (one step down to 7/8" works too) using my trusty unibit who I call Chuck (Yes I name my bits. Yes I am aware how completely weird that is).
A 7/8" holesaw will also work.







I don't know how else to say this but, insert it into the hole. (Must resist...):







Easy. Peasy. Japanesey:




That's really all there is to it!






But I wanted the compression fittings to make direct contact with the panel. I wasn't really feeling that extra knurled ring just beneath the actual fitting:





So the preceding leads us to my pirate way.

I step drill to 3/4". This size hole is big enough to clear the o-ring and the little ridge that surrounds it - the "lip" thingy and small enough that the fittings won't go through the hole.
You can use any size compression fittings since the diameters of the o-rings and the ridge are the same.
I tested that the 3/4" hole works on a 5/8" compression fittings.

Here's a close up of the male threads of a 1/2" compression fitting showing the ridge lip thingy sitting just outside the o-ring:




Same fitting different angle:




After I insert the threaded end into the 3/4" hole, I wiggle it to make certain that the o-ring and the "lip" thingy isnt sitting on the panel but making complete hole clearance.
The compression fitting must sit flush against the panel:







Then I connect the pass-through male-side in:






Twist and secure:







The image below shows the o-ring that come with the pass-throughs on the wrong side.
Although I didn't personally have leaks this way, I suggest placing it between the panel and the middle ring.

I then twist the middle ring until its securely flush with the panel.

This holds it securely in place.:








In the image below, the situation on the left shows the compression fittings being fitted by a "Multi-Transfer Base" or a female to female coupler.
I call them "Lezlies".
This method works with no leaks as well.
The situation on the right shows my finished pirate method:








Although the Lezlies work leak-free, they're not held secure to the panel, unlike the other pass-through pirate method:









Apologies for the the long-winded super boring update.
I hope it can help somebody or at least clear up the craziness I'm attempting if nothing else. I should have more build updates very soon.

Thanks for checking in all! I appreciate all your comments. It really does keep me motivated!

[shazza]

Killin' me. Hmmm ... to go Lezlie or Pirate? Such a conundrum, but I'm sure either way will be an adventure.
VERY !!!!!! HELPFUL !!!!! update, Cpt !!!!!!


And about that CPU block ... I've already passed my XT onto a new home, so there is room in the drawer for another "test" subject.

[Kibbler]

Lezlie or Pirate?

Why does it have to be a choice?

Why not...

Lezlie pirates!!! A-HO-y!

Oh I kill myself.

Capt: The wide o-ring on the pass-thru doesn't do any sealing, what it does is anti-twist to prevent the pass-thru from spinning round-n-round in the hole that you/Chuck made.

I was originally concerned about aluminum contact if you're double-sealing against the panel (and I have no such grasp of the English language to make sense of such a worry in WERDS, only in PICTARS which I have no such drawing ability to create...so you see my problem here...), but now I can see that's not the case. Good on ya!

[Antioch]

Just to be safe in regards to leaks, why not pick up that plumbers vinyl tape and use it? Erm.. what I'm talking about is a roll of thin, white (usually), vinyl that you wrap around the threads before you screw the "nut" onto the "bolt" (lezlie and compression in this case -- I think??). Wrap it around whatever you're screwing into the pass-through, so that's compression on one side and something on the other.

[CptDreadFlint]

Lezlie or Pirate?

Always go Pirates, Shazz!

Lezlie pirates!!! A-HO-y!...

...I was originally concerned about aluminum contact...

Lolz @ Lezlie Pirate Ho.

Yes good call, Kibbs. I was concerned about the contact with the aluminum panel myself. Checking and rechecking as I steer this ship home.

Hopefully, if all goes well, I can avoid this ship turning into a rusted barge.

Just to be safe in regards to leaks, why not pick up that plumbers vinyl tape and use it? Erm.. what I'm talking about is a roll of thin, white (usually), vinyl that you wrap around the threads before you screw the "nut" onto the "bolt" (lezlie and compression in this case -- I think??). Wrap it around whatever you're screwing into the pass-through, so that's compression on one side and something on the other.

Yes and thanks, Antioch . Was playing around with it over the weekend.
Manage to do some testing with it on a couple of 45 rotes.






It almost feel like silly string but not.

[Antioch]

Yeah, it's great stuff - and cheap too!

[aka_GK]

thanks for sharing Rick

your "Easy. Peasy. Japanesey:" just made my morning

[martensch]

awesome build! i like the effort you`re spending on details!! thumbsup!! not to talk about your delicious photography skills...

[callen_1]

Instead of the tape it would have been much easier to simply redesign the centre plate of the case, have it waterjet cut from copper
plate, bent to shape and nickel plated. That way it wouldn't matter if the water made contact lol.

But on a serious note great work mate, i think you may have saved a lot of people a headache not to mention time experimenting

[Kibbler]

Actually PTFE tape is a nono on BSPP (parallel) threads, which are denoted by "G" as in G1/4, G3/8, etc.

[Waterlogged]

Actually PTFE tape is a nono on BSPP (parallel) threads, which are denoted by "G" as in G1/4, G3/8, etc.

No need to be timid about it. . .+1.

Death to modders that use PTFE on BSPP(G) threads!

[kgtiger]

Excellent work Captain.

I do agree that the thread tape in not needed on straight theads as the O-ring is the sealing part not the thread.

When your using tapered thread like you get with plumbing fittings then thread tape is a must, as the thread tape is what helps to seal the join as there in no o-ring in the join.

[Antioch]

Mmmmmmm sorry.

I'm the timid one now. I shall never mod again!

[bentleya]

Actually PTFE tape is a nono on BSPP (parallel) threads, which are denoted by "G" as in G1/4, G3/8, etc.

BSP Plus The G stands for o-ring. Where a 1/4 BSP barb would look the same as a G1/4 barb but without the o-ring.

Anyways, Eye Eye Captain, great photos and work like always .

[Waterlogged]

Not to drag Cpt's log OT but, here's a great thread discussing fitting threads starting at post #21.

http://www.xtremesystems.org/forums/...d.php?t=162770

[CptDreadFlint]

Thanks for the feedback all... I truly value all the words of encouragement and appreciate all the input, suggestions and ideas you have all provided me!

thanks for sharing Rick

your "Easy. Peasy. Japanesey:" just made my morning

Heyas GK! Hows the sticker situation? Very interested to see what you've got cooking!

awesome build! i like the effort you`re spending on details!! thumbsup!! not to talk about your delicious photography skills...

Thanks for your awesome words of support, martensch!

Instead of the tape it would have been much easier to simply redesign the centre plate of the case, have it waterjet cut from copper
plate, bent to shape and nickel plated. That way it wouldn't matter if the water made contact lol.

But on a serious note great work mate, i think you may have saved a lot of people a headache not to mention time experimenting

Callen, I think I should come over for a visit. I'll bring me sheet bender and we'll play with your nickel plating kit.

Actually PTFE tape is a nono on BSPP (parallel) threads, which are denoted by "G" as in G1/4, G3/8, etc.

Step out from behind the sofa and drop down ye knowledge, Kibbs.

I value your input more than I can convey here in mere font.
It was you who initially prompted me to do more research on where the actual seal is being made on BSPP/BSPT threads.

One of the things I truly enjoy about this particular build is the amount of new stuff I'm learning and the interaction I have with knowledable XS members.

Anybody assisting that process is always a welcome member of the crew. Although you were inducted a while ago, allow me to make the official announcement - Welcome aboard, me hearty!

Excellent work Captain.

I do agree that the thread tape in not needed on straight theads as the O-ring is the sealing part not the thread.

When your using tapered thread like you get with plumbing fittings then thread tape is a must, as the thread tape is what helps to seal the join as there in no o-ring in the join.

Thanks Graeme You already know I value your input and I don't see that changing any time soon.

Mmmmmmm sorry.

I'm the timid one now. I shall never mod again!

Antioch. You wouldn't dare! (Would you?)
Truth be told, I'm thankful events happened in the order they did.
If I was to be told that PTFE tape shouldn't be used BSP* threads before I actually did, I would have been robbed the pleasure of chasing my 10 year old around house while wielding it as the silly-string weapon of mass destruction.

BSP Plus The G stands for o-ring. Where a 1/4 BSP barb would look the same as a G1/4 barb but without the o-ring.

Anyways, Eye Eye Captain, great photos and work like always .

Thanks, bent! I'm always appreciative of your feedback, me hearty.

Not to drag Cpt's log OT but, here's a great thread discussing fitting threads starting at post #21.

http://www.xtremesystems.org/forums/...d.php?t=162770

No worries, Waterlogged. You're right on topic. I welcome off-topic stuff as well. I very much appreciate the constructive feedback via the link you posted, you link magician, you.
Still reading...as there are loads of info to absorb.

P.S. Your first post reminded me of Contra. lolz







I shall continue to cram square pegs into round holes and look for solutions along the way.

Whether I'll waterjet the square pegs round or route the round holes square, feel free to stay tuned.
I could fall flat on my face at any given time and it could very well be the most hilarious thing you've ever seen online.

[CptDreadFlint]

Thought I'd share some pics before I'm off to go man scan Best Buy's camera section. My tripod broke

Custom front panel I ordered from Ben (Mountain Mods head honcho):






Filled and drained the GPU loop a couple of times. I'm looking for a way to route the tubing in a visually appealing configuration.
I have few ideas in mind.









Here's the rig in its current state:










Here's my artsy-fartsy attempt.




As always thanks for checking in all!

[callen_1]

Those shots are just gorgeous!!!! brings a tear to my eye, mostly due to sadness and disappointment though as i know i'll never be
able to take shots like that make me a wallpaper please, anything will do

[kgtiger]

Photo's look sweeeet champ.
Where does that 90 degree fitting go that on the bottom card?

[Antioch]

Heh, no I wouldn't stop - no need to call my bluff. However, while I did know that the o-ring was doing the leak prevention, I figured adding the tape for more safety wouldn't hurt...

[aka_GK]

Heyas GK! Hows the sticker situation? Very interested to see what you've got cooking!

Like they said stickers are in production and will be shipped soon, thank you that linked me to such a good service.
I've paid $13.39 for 2 sheets and shipping, that's quite amazing
Last printery I visited here in Moscow said "Yes, we can do small run, it will be $220 for 1000pcs"

As for overall progress it looks like I am going to rearrange some part of the build, again (sigh... stupid perfectionism doesn't allow me to leave it as it is )