msi 790 fx-gd70 thread

**beta** · 01-15-2010, 03:20 AM

well I haven't tried 1.8, but 1.91 is working just fine.

anyway, here's the newest bios, 1.92:

A7577AMS.191 ---> A7577AMS.192

- Supported HDD size up to 4294.9T.
- Implement msi Energy Star logo.

post dl

**Mavhenz** · 01-15-2010, 07:03 AM

Thx, will try it today if I could!
^^

(Beta got beta connections...)

**Mavhenz** · 01-16-2010, 11:31 PM

I'm not able to get higher frequency but I'm able to get lower voltage for the same thing.

Witch is cool...

**Mavhenz** · 01-17-2010, 08:29 PM

Where could I report bug for the Bios?

Already got one!

**SKoob** · 01-18-2010, 04:47 AM

Tried 191b and got a HyperTransport flood error when benchmarking my SSD wth NCQ enabled

**inferKNOX** · 01-18-2010, 04:55 AM

Originally Posted by Mavhenz

It seem that since I flashed to the 1.7 bios I get those error on idle:

Hypertransport flood something...
Any suggestion?

Originally Posted by SKoob

I've been getting the same, but usually when prime testing at my current clocks and volts and also if i push the volts and clocks up to get 4Ghz. Hopefully the new bios's that have been posted will sort this out

For you guys, I can tell you that you don't need to worry about contacting MSI, as I already have. It's a problem, according to them, in the Disk Management module of the 1.7 BIOS. If you use 1.6 you won't have that error anymore.
BIOS 1.8 might be stable too, because they suggested I use 1.8b3 & it has only given me 1 HT Sync Flood Error, caused by Diskeeper, which I uninstalled and I've never had a problem since. Also worth mentioning, Raxco PerfectDisk has never given me the error. (Win7 x64)
Switching to 1.8 tonight and will let you guys know if any HT Sync Flood Errors start popping up.

Edit: if you still want to contact MSI though, you do it here:
http://support.msi.com/index.php

**Mavhenz** · 01-18-2010, 05:46 AM

I have switched to the 1.92.

No problem anymore!
But one minor issue that's all.

**SKoob** · 01-18-2010, 06:22 AM

Originally Posted by inferKNOX

For you guys, I can tell you that you don't need to worry about contacting MSI, as I already have. It's a problem, according to them, in the Disk Management module of the 1.7 BIOS. If you use 1.6 you won't have that error anymore.
BIOS 1.8 might be stable too, because they suggested I use 1.8b3 & it has only given me 1 HT Sync Flood Error, caused by Diskeeper, which I uninstalled and I've never had a problem since. Also worth mentioning, Raxco PerfectDisk has never given me the error. (Win7 x64)
Switching to 1.8 tonight and will let you guys know if any HT Sync Flood Errors start popping up.

Edit: if you still want to contact MSI though, you do it here:
http://support.msi.com/index.php

Thanks for the info, will try the earlier BIOS as these errors are driving me nuts

Be intersting to see if 192 has sorted the issue too though.

**ah_khoo** · 01-20-2010, 08:36 PM

new user reportin in...

an old chip but quite decent iimo...

**ggdh** · 01-21-2010, 02:20 AM

Push it, push it

**Joren** · 01-23-2010, 04:05 PM

Yeah ! finaly i've got him too

This board is amazing

i did not found out yet, what i CAN'T do whit it:P

running with: 955BE, Geil ddr3 2133mhz cl9 @ 1600

btw, first post here

**XRogerX** · 01-24-2010, 04:03 AM

ok i know there some new bios out there for this board , i was wondering what is the best one that has been tested for overlcokcing

as i still have the 1.3B6 bios

**Joren** · 01-24-2010, 09:59 AM

I'm using bios 1.5 now, and was wondering too what is the best OC bios arm

**jonspd** · 01-24-2010, 10:24 AM

Originally Posted by XRogerX

ok i know there some new bios out there for this board , i was wondering what is the best one that has been tested for overlcokcing

as i still have the 1.3B6 bios

same here is 1.92 better then 1.3b7?

**2cpu** · 01-29-2010, 10:07 PM

Hello
Recently i change the stock cooler of my 720 BE with one scythe mugen.
Exept the temp (wich i dont think its so low) any explaination about the other values?

**Mavhenz** · 01-30-2010, 11:44 AM

Witch explanation do you want?
Everything seem ok on first sight!

**jedihobbit** · 01-30-2010, 12:01 PM

Originally Posted by Mavhenz

Witch explanation do you want?
Everything seem ok on first sight!

Throwing spells are ya???? http://en.wikipedia.org/wiki/Witch_(disambiguation)

With all the funnin' aside, this has made for a good read.....just hope one will find its way into my household by this fall!

**beta** · 02-10-2010, 12:50 AM

new bios with ddr3 1800 support?

A7577AMS.1A1 ---> A7577AMS.1A2
- Add AMD DDR3 1800Mhz OC support solution

dl - thread

**Leeghoofd** · 02-10-2010, 01:58 AM

Anyone running this board with 8Gb and 1T command rate (comparing the Giga A UD5 with the GD70)

**ggdh** · 02-10-2010, 02:06 AM

Anybody tried that? I had to downclock my Reapers to 1600 :/

**Cele303** · 02-10-2010, 06:44 AM

Originally Posted by beta

new bios with ddr3 1800 support?

dl - thread

Thanks man,

I will try it later today... With any bios I tried from Tony repository the best bios boot is 1760 6-6-6-18 1T...

I'm playing with 1.9 official bios for the last two days, can't get rid of ht flood error, only bios that works good for me is 1.8b4, I can't find the reason, everything that works so smooth with my Giga runs poor or not at all with msi

**beta** · 02-10-2010, 08:19 AM

the new bios lets me boot windows @ 1800.. not blend stable though, i think my ram isn't good enough.

**Leeghoofd** · 02-10-2010, 09:08 AM

Or your IMC caps out

**beta** · 02-10-2010, 10:21 AM

tweaking the imc doesn't help, i always get the same error immediately after starting blend. I tried to give the ram more volts (1.80v->1.95v) and it seems to stabilize blend for a few more seconds.

**=SOC= Admiral** · 02-10-2010, 07:29 PM

Ok need some info and recommendation. What exactly does the Active Phase Management do and would I benefit from turning it on/should I turn it on?

Thread: msi 790 fx-gd70 thread

Thread Tools

Search Thread

Rate This Thread

Display

re

re

re

re

re

Bookmarks

Bookmarks

Posting Permissions