No degradation here.
Again after a long time abusing the Q9650 it's still rock solid on Prime95 blend.
Key: Low Temps.
EP45-UD3P + Q9650@4500Mhz_1.32vcore + G.Skill ECO DDR3 1600Mhz
Don't mind ram timings they were relaxed the test was just to check CPU stress without ram interference
Last edited by Jor3lBR; 01-12-2010 at 07:52 PM.
//RETIRED-o00o--°(_)°--o00o-OVERCLOCKER//
Very nice friendOriginally Posted by Jor3lBR
Again after a long time abusing the Q9650 it's still rock solid on Prime95 blend.
Key: Low Temps.
EP45-UD3P + Q9650@4500Mhz_1.32vcore + G.Skill ECO DDR3 1600Mhz
Don't mind ram timings they were relaxed the test was just to check CPU stress without ram interference
Cheers
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Just got a free upgrade to a brand new Q9550 from my old Q9400
and i can see it does 4.0 a lot easier than even my last one on this board..
although i gotta say there appear to be boot issues with this particular UD3R, almost like it doesn't wanna boot unless you set EXACTLY the right settings, took 25 tries once and had to remove the CMOS battery and even then....
Gonna give it's little brother the EP45 UD3L a try this afternoon....either way it's good to have a back up board...
and the 12 mb of cache doesn't hurt either....
Temporary build:
E5800 Dual Core @ 3.8 ghz stock vcore (24/7) (16x238)
2GB Value Brand Generic Ram DDR3 1333
(cheap) Asrock G41M-VS3 (yes it's bad i know)
Radeon HD 4870 Reference Edition 512 GDDR5 (770/920)
Antec 900 Ultimate Gamer Case
Asus 22'' LCD @ 1650x1050
and Samsung 940NW LCD at 1440x900
Hey it's cheap and plays anything
Very nice work there jor3lbr, I see you had a nice low temp to work with too
Just got my RMA cheque from my dominator GT DDR2 modules at long last, so a set of trident 1200's are on the cards so I can finally acheive my goal of 4.5/ddr1200, and will hopefully be able to aim a higher for some more benching.
One thing I found is that 499x9 seems a load easier to stabilise than 500, and with nearly 0.2vcore less, has anyone else experienced this?
Gigabyte EX58A-UD3R F6 : i7 920 D0 4.4GHz 1.4v : 4Gb G.Skill ECO 6-8-6-24 1.54v
Apogee XT & MCW30 : XSPC Dual 750 w/DDC+18W : RX120 & RX240 : Tygon tubing : Corsair HX 850
2x750Gb 7200.12 RAID0 : 2x500Gb 7200.12 RAID1 : Samsung DVD-RW : LG BD-R
Antec P182 with 5 x Noctua NF-P12 & 1 x Akasa Apache
M-Audio Delta 1010 (Rack) : Behringer Truth B2031A
XFX 5770 + 8600GTS (physx) : 2x Samsung Syncmaster 710n
Lappy: Asus C90s & E7500 @3.17GHz w/ 4Gb RAM & top scoring 8600m GT DDR2
Nice workAgain after a long time abusing the Q9650 it's still rock solid on Prime95 blend.
Key: Low Temps.
EP45-UD3P + Q9650@4500Mhz_1.32vcore + G.Skill ECO DDR3 1600Mhz
Don't mind ram timings they were relaxed the test was just to check CPU stress without ram interference
Could you post your bios template?
What cooling do you use on CPU and MCH?
Cheers
Posting Permissions
Reply With Quote
Bookmarks