** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[waiho2k1]

Hi all, just get one EP45-UD3P and is having problem in getting my Q9650 stable @ 495 FSB (prime freezes after 1.5 hours).... settings as below, what's wrong? The ram is Gskill PC8500 PK 2GB X 2
MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster ..................: Auto
CPU Clock Ratio ..........................: 8
Fine CPU Clock Ratio......................: +0.5
CPU Frequency ............................: 4.20Ghz (495x8.5)

Clock Chip Control
Standard Clock Control
CPU Host Clock Control....................: [Enabled]
CPU Host Frequency (Mhz) .................: 495
PCI Express Frequency (Mhz) ..............: 100
C.I.A. 2..................................: [Disabled]

Advanced Clock Control
CPU Clock Drive...........................: 1000mV
PCI Express Clock Drive...................: 1000mV
CPU Clock Skew (ps).......................: 0ps
MCH Clock Skew (ps).......................: 50ps

DRAM Performance Control
Performance Enhance......................: Standard
MCH Frequency Latch......................: 400
System Memory Multiplier ................: 2.00D
Memory Frequency (Mhz) ..................: 990
DRAM Timing Selectable ..................: Manual

Standard Timing Control
CAS Latency Time.........................: 5
tRCD ....................................: 5
tRP......................................: 5
tRAS.....................................: 15
Advanced Timing Control [Press Enter]
tRRD.....................................: Auto
tWTR.....................................: Auto
tWR......................................: Auto
tRFC.....................................: Auto
tRTP.....................................: Auto
Command Rate (CMD) ......................: 2T
Channel A
Channel A Timings Settings
Static tRead Value......................: 10

Channel B
Channel B Timings Settings
Static tRead Value......................: 10

Motherboard Voltage Control

Load-Line Calibration.....................: Enabled
CPU Vcore...............1.22500V..........: 1.38125V
CPU Termination.........1.200V............: 1.36V
CPU PLL.................1.500V............: 1.570v
CPU Reference...........0.760V............: 0.886
MCH/ICH
MCH Core................1.100V............: 1.44v
MCH Reference...........0.760V............: 0.901v
MCH/DRAM Reference......0.900V............: auto
ICH I/O.................1.500V............: 1.500v
ICH Core................1.100V............: 1.100v
DRAM
DRAM Voltage............1.800V............: 2.04v
DRAM Termination........0.900V............: auto
Channel A Address Vref..0.900V............: auto
Channel B Address Vref..0.900V............: auto

Advanced Settings
Limit CPUID Max. to 3.....................: Disabled
No-Execute Memory Protect.................: Enabled
CPU Enhanced Halt (C1E)...................: Disabled
C2/C2E State Support......................: Disabled
x C4/C4E State Support....................: Disabled
CPU Thermal Monitor 2(TM2) ...............: Disabled
CPU EIST Function.........................: Disabled
Virtualization Technology.................: Enabled