G.SKILL PIS F3-17600CL7D-4GBPIS 2200 7-10-10-28 1.65V P55 Series

[hiwa]

I don´t know. I´ve used 2:12

maybe it's your cpu or you set low vtt, if you didn't test it on other memories

good luck

[borec]

hm today I will test system with 2:10 divider and any other sticks. thank you for response

btw: VTT was about 1,35 and 1,45V. I think, this is not small VTT

[hiwa]

please tell us all your settings and options you set in bios
cooling you are using on cpu
i tested a lot of 860 and 870 and can say +95% of them goes over 3600 uncore with 1.35
if u used 2:12 so you had lower Bclk and lower uncore.

[borec]

ok, for cpu:
200BCLK
VTT 1,33V (200BCLK rock stable) but tested up to 1,45V
PLL 1,81V
PCH 1,08V
qpi 3600MHz (7200)
DRAM only up to 1,66-1,67V

cooling: water or SS -45° without any change...

for memory:
timing is from the XMP profil, after I was manual set TRFC and dividers...
for 2390MHz on ram is this setting OK, but 2400+ is impossible.

[M3kk]

If you put higher vdim with default settings then its all OK ?
Can you try them in other MB?

[borec]

yes, if I have memory on a default (2,2GHz CL7) then I can set voltage to 1,85V+ and system post without any problems.

I don´t have other mobo

[hiwa]

ok, for cpu:
200BCLK
VTT 1,33V (200BCLK rock stable) but tested up to 1,45V
PLL 1,81V
PCH 1,08V
qpi 3600MHz (7200)
DRAM only up to 1,66-1,67V

cooling: water or SS -45° without any change...

for memory:
timing is from the XMP profil, after I was manual set TRFC and dividers...
for 2390MHz on ram is this setting OK, but 2400+ is impossible.

MSI set right MEM spd?
i mean you have to try cl +3 = Trcd
example if you want use Cas 7 you have to use 10 like tRCD

best way :
set 2200 7-10-10-27-5-88 1.65 and boot
check Everest timings and write them somewhere, then reboot and set exactly same settings in bios

[borec]

Mobo, I think, set right SPD
I have 7-10-10-28-?-110 default...
then I set 7-10-10-28-?-80...

best way :
set 2200 7-10-10-27-5-88 1.65 and boot
check Everest timings and write them somewhere, then reboot and set exactly same settings in bios

sorry I´m a noob. please what timing is 5 in your settings? thx
---
btw: 2:10 for 2400MHz on ram with my 860 is impossible. max Bclk is about 222

[hiwa]

it's tRRD
try 2:12

[borec]

I think, this is mobo or CPU but 2400 is impossible for 32M SPI...

[borec]

some results with small frequency
2000MHz 6-9-6-24-5-88 1T 1,63V real linx stable


2055MHz 6-9-6-24-5-88 1T 1,655V real SPI 32M


Thanks hiwa!

[Kentaro]

Thanks for sharing this. What VTT do you guys set for 2000 CL6 ??

[hiwa]

he some nice results there borec


Kentaro
dipend
for
200 Bclk
3600 uncore
2400 mem
i need 1.37 on my 870 and 1.32 on my 860

for 4100 uncore and high bclk with high mem i need 1.50 to 1.60

[borec]

My VTT is about 1,35V

[SF3D]

Courier have tried two days in a row to deliver these sticks to me. Why they can't just call..

Can't wait to fire them up! Seems to be perfect kit for low Cas values.

[hiwa]

look like finland courier is same as italy

try them under cold and u will see

[hiwa]

My VTT is about 1,35V

the secret is your background change it to black and u have to give +0.5 on VTT

you know IMC changed and go harder with hot desktop background

[Kentaro]

Thanks for sharing

It seems these kits can go lower CAS at high frequency than Ripjaws do.

2000 CL6 with 1.65V looks nice. Is anyone going to try it on X58 platform??

[Hunt3r_Br]

some results with small frequency
2000MHz 6-9-6-24-5-88 1T 1,63V real linx stable


2055MHz 6-9-6-24-5-88 1T 1,655V real SPI 32M


Thanks hiwa!

This bulgar your program?

[borec]

hm?

the secret is your background change it to black and u have to give +0.5 on VTT

you know IMC changed and go harder with hot desktop background

[hiwa]

2000 6-9-6-24-88-5 1.62 200 X 19
33 minuts LinX passed



2050 6-9-6-24-88-5 1.65
11 min Linx passed

[proxis]

i don't think that linx is a good memory stability tool

[zalbard]

Try y-cruncher's stability test or WPrime (WPrime doesn't work for me and it's not as effective, though).

[devil_mcry]

ics of this kit?

[borec]

I´dont know..
are renamed.
I´ve posted foto of ICS on this thread