Page 1 of 15 123411 ... LastLast
Results 1 to 25 of 360

Thread: G.SKILL PIS F3-17600CL7D-4GBPIS 2200 7-10-10-28 1.65V P55 Series

  1. #1
    .
    Join Date
    Nov 2006
    Posts
    2,613

    G.SKILL PIS F3-17600CL7D-4GBPIS 2200 7-10-10-28 1.65V P55 Series

    Hi all
    Today we start testing new monsters from GSKILL the new 2200 7-10-10-28 low voltage kit with new package and new Air Stock cooling











    Specification
    Main Board intel
    System Desktop
    System Type DDR3
    M/B Chipset Intel P55*
    CAS_Latency 7-10-10-28-2N
    Capacity 4GB (2GBx2)
    Speed DDR3-2200 (PC3 17600)
    Test_Voltage 1.65 Volts
    PCB
    Registered/Unbuffered Unbuffered
    Error_Checking Non-ECC
    Type 240-pin DIMM
    Warranty Lifetime
    Qualified Motherboards List

    ASUS Maximus III Formula
    ASUS Maximus III Gene
    ASUS SABERTOOTH 55i
    ASUS P7P55D Premium
    ASUS P7P55D Deluxe
    EVGA P55 Classified 200
    EVGA P55 FTW 200
    EVGA P55 FTW
    MSI P55-GD80
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  2. #2
    .
    Join Date
    Nov 2006
    Posts
    2,613
    2210 7-10-10-28 1t 1.65 3X SPI 32m



    will start tomorrow
    Last edited by hiwa; 11-16-2009 at 11:38 AM.
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  3. #3
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,217
    loookin good
    test on

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v

  4. #4
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,801
    Nice don't they also have a 2x2GB P55 kit with PC3-18400 9-9-9-x out ?
    ---

  5. #5
    Aussie God
    Join Date
    Feb 2005
    Location
    Copenhagen, Denmark
    Posts
    4,702
    Looks sexy, hope you can get that RAS to CAS down, 10 is..... Well, too high.
    Keeping fingers crossed for you hitting 7-8-8-24 with only little above stock vdimm

    Please remove IC and reveal the chips during the resulting

    Quote Originally Posted by eva2000 View Post
    Nice don't they also have a 2x2GB P55 kit with PC3-18400 9-9-9-x out ?
    Yes, Trident PC18400 CL9, they are listed on their page, dont know nothing more, dispite these ram has been in my interest for a long time, unfortunately Im not a decent ram clocker/tweaker.. Back to the cuttonfield I go...
    Competition ranking;
    2005; Netbyte, Karise/Denmark #1 @ PiFast
    2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
    2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
    2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)

    Spectating;
    2010; GOOC 2010 Many thanks to Gigabyte!


  6. #6
    I am Xtreme
    Join Date
    Dec 2008
    Location
    France
    Posts
    8,829
    Results, we need more results!
    Nice looking setup!
    Donate to XS forums
    Quote Originally Posted by jayhall0315 View Post
    If you are really extreme, you never let informed facts or the scientific method hold you back from your journey to the wrong answer.

  7. #7
    .
    Join Date
    Nov 2006
    Posts
    2,613
    Quote Originally Posted by eva2000 View Post
    Nice don't they also have a 2x2GB P55 kit with PC3-18400 9-9-9-x out ?
    check website george new trident will be 18400 cl9

    Quote Originally Posted by M.Beier View Post
    Looks sexy, hope you can get that RAS to CAS down, 10 is..... Well, too high.
    Keeping fingers crossed for you hitting 7-8-8-24 with only little above stock vdimm

    Please remove IC and reveal the chips during the resulting
    they are crazy nice
    i hope so will test lower tRCD and tRP tomorrow
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  8. #8
    Xtreme Enthusiast
    Join Date
    May 2005
    Location
    Edmonton, Alberta, Canada
    Posts
    714
    Sexy heatspreaders!

    Too bad they are ridiculously tall.

    Nice stuff though, again
    Gigabyte X58A-UD3R | i7 930 @ 4 GHz | Corsair H50
    G.Skill RipJaws 4x2 GB @ DDR3-1600 7-7-6-24-1N | HIS Radeon HD 5870
    3x Intel X25-M 80 GB RAID-0; OCZ Agility 120 GB | Samsung SH-S243D
    Corsair HX1000 | Dell 3007WFP & Samsung 204T | 7 Ultimate x64

  9. #9
    Xtreme Mentor
    Join Date
    Jan 2008
    Location
    Malaysia
    Posts
    2,921
    Quote Originally Posted by hiwa View Post
    check website george new trident will be 18400 cl9
    This kits are long time on they website.
    Also what happen with Perfect Storm F3-18400CL8D-4GBPS?

    Last edited by stasio; 11-16-2009 at 09:02 PM.
    Need a Gigabyte latest BIOS?
    GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
    G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64 (6.3)

  10. #10
    .
    Join Date
    Nov 2006
    Posts
    2,613
    i think they are samples not retail kit
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  11. #11
    Xtreme Member
    Join Date
    Feb 2008
    Location
    Luxembourg
    Posts
    222
    Yeah, that's fine. I should receive mine today...:p Unfortunately, my rig can't go higher than ~2200 on air, but i'll try some tight timings :p

  12. #12
    Xtreme Member
    Join Date
    Jul 2009
    Location
    Germany _ Frankfurt
    Posts
    395
    nice kit, thx for sharing
    www.vitesse24.de
    www.vitesse24.de


    C2Q q6600 3.3GHZ @ 1,184V
    4,5GHZ@ 1,52V ( 9* 500 )




    Corsair Dominator 10000 2gb, 8888 2gb, 9136 1gb

  13. #13
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,801
    Quote Originally Posted by hiwa View Post
    check website george new trident will be 18400 cl9
    yeah double checked... these will definitely been binned nicely at DDR3-2300Mhz 9-9-9-x !
    ---

  14. #14
    Champion
    Join Date
    Nov 2004
    Location
    Hungary
    Posts
    1,193
    Quote Originally Posted by hiwa View Post
    2210 7-10-10-28 1t 1.65 3X SPI 32m



    will start tomorrow
    Great modules hiwa!

    What qpi voltage need for this?

    My Kingstons can almost same, but I feel my mobo is not enough to stabilize them at 2200Mhz

    2200 7-9-7-22 1T 88 wprime
    "We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna

  15. #15
    .
    Join Date
    Nov 2006
    Posts
    2,613
    Quote Originally Posted by eva2000 View Post
    yeah double checked... these will definitely been binned nicely at DDR3-2300Mhz 9-9-9-x !
    yes they should be nice hypers Inside
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  16. #16
    .
    Join Date
    Nov 2006
    Posts
    2,613
    Quote Originally Posted by over@locker886 View Post
    Great modules hiwa!

    What qpi voltage need for this?

    My Kingstons can almost same, but I feel my mobo is not enough to stabilize them at 2200Mhz

    2200 7-9-7-22 1T 88 wprime

    thanks
    VTT is 1.32/5

    i tried + 8 kits 5 Hyper, 2 normal Dj-f (2133 cl9 kit)+ one binned dj-f no one can boot 2200 7-10-10-28-100 with 1.65 Vdimm my best pair of hypers closed a 32m run with same timings @ 1.70

    tonight i'll update UD6 with F6A
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  17. #17
    Champion
    Join Date
    Nov 2004
    Location
    Hungary
    Posts
    1,193
    Quote Originally Posted by hiwa View Post
    thanks
    VTT is 1.32/5

    i tried + 8 kits 5 Hyper, 2 normal Dj-f (2133 cl9 kit)+ one binned dj-f no one can boot 2200 7-10-10-28-100 with 1.65 Vdimm my best pair of hypers closed a 32m run with same timings @ 1.70

    tonight i'll update UD6 with F6A
    wow, only 1,32-5v vtt need really nice!

    I see, thanks the informations. These memories have bbse chips or something new?

    Offically, my memories is 2000 CL9 tri-channel kit. ^^

    I will wait your new results with new bios :P
    "We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna

  18. #18
    .
    Join Date
    Nov 2006
    Posts
    2,613
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  19. #19
    Xtreme Family
    Join Date
    Dec 2004
    Location
    Republic of Hiroshima
    Posts
    2,641
    WOW ,nice start Bro

    Another great stuff from G.SKILL , beatifull and it's awesome

    Well,mine is here




    thanks G.SKILL
    Mojo
    Family
    Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
    Criminal
    Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
    Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
    Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
    Kids
    P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w



  20. #20
    Xtreme Mentor
    Join Date
    Jan 2008
    Location
    Malaysia
    Posts
    2,921
    I have problem with MU,anyway thanks.

    The file you are trying to access is temporarily unavailable.
    Need a Gigabyte latest BIOS?
    GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
    G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64 (6.3)

  21. #21
    .
    Join Date
    Nov 2006
    Posts
    2,613
    Great start junior
    waiting tests from you too bro

    @stasio u are right let me back @ home and will upload it on another server

    here is rapidshare
    http://rapidshare.com/files/308328134/P55UD6.F6A.html
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  22. #22
    Xtreme Mentor
    Join Date
    Jan 2008
    Location
    Malaysia
    Posts
    2,921
    No luck.
    This file can only be downloaded by becoming a Premium member
    Mediafire?
    We in SE Asia very hard can dl from RS or MU.
    Edit:
    OK,done.
    Thanks hiwa.
    Last edited by stasio; 11-17-2009 at 12:27 PM.
    Need a Gigabyte latest BIOS?
    GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
    G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64 (6.3)

  23. #23
    .
    Join Date
    Nov 2006
    Posts
    2,613
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  24. #24
    Xtreme Member
    Join Date
    Feb 2008
    Location
    Luxembourg
    Posts
    222
    Playing with 7-9-7, i can get 1044 Mhz for now. Keep going up :p

  25. #25
    Xtreme Mentor
    Join Date
    Feb 2008
    Posts
    2,625
    I hope that they will sell that ram cooler seperately!

    I like it very much, but just bought cheap OEM Geil modules.
    Intel I7 980 + Phanteks PH-TC14PE Red, Asus Rampage III Extreme, 12 GB Geil Ultra Series
    SLI MSI GTX 680 power edition, Creative X-Fi Titanium HD, 2x4 Tb Seagate HDD, 128 Gb Crucial M4, 512 Gb Crucial M4
    Gigabyte M8000X, Microsoft Sidewinder X4, Antec P182, Acer G24, Windows 7 Professional, XFX Proseries 850w XXX

    Keeping my mobo + CPU till they are obsolete

    Copper loop X48 build Blue X58 Build Red X58 build

Page 1 of 15 123411 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •