Quote Originally Posted by Sooty305 View Post
Anyone with a GA-EP45T-UD3LR board that can plz post bios setting for anything over 4.0 on a Quad core ( Stable ) i have a Q9550 and need help getting past 4.0 stable.
I don't have a Quad, but here's my settings for the Work PC in my Sig.

Code:
GA-EP45T-UD3LR BIOS Template: E7500 (1.200 VID)

******Motherboard Intelligent Tweaker (M.I.T.)******

Robust Graphics Booster....................[Auto]
CPU Clock Ratio............................[ 8 X]
Fine CPU Clock Ratio.......................[+0.0]
CPU Frequency..............................[ 500x8]

******Clock Chip Control******

CPU Host Clock Control.....................[Enabled]
CPU Host Frequency (Mhz)...................[ 500]
PCI Express Frequency (Mhz)................[100]
C.I.A 2....................................[Disabled]

CPU Clock Drive............................[ 800mv]
PCI Express Clock Drive....................[ 800mv]
CPU Clock Skew.............................[   0ps]
MCH Clock Skew.............................[   0ps]

******DRAM Performance Control******

Performance Enhance........................[Standard]
Extreme Memory Profile (X.M.P).............[Disabled]
(G) MCH Frequency Latch....................[Auto]
System Memory Multipler....................[3.2B]
Memory Frequency 1066......................[1600]
DRAM Timing Selectable.....................[Manual]

CAS Latency Time[7]........................[7]
tRCD[7]....................................[6]
tRP[7].....................................[6]
tRAS[16]...................................[16]

******Advanced Timing Control******

All on Auto except:
Static tRead Value (Performance Level) = 8
TRFC = 60

******Motherboard Voltage Control******

Load-Line Calibration......................[Enabled]
CPU Vcore          [1.20000]...............[1.3875]
CPU Termination    [1.200].................[1.240]
CPU PLL            [1.550].................[1.550]
CPU Reference      [0.805].................[0.810] .785 in ET6

MCH Core           [1.100].................[1.280]
MCH Reference      [0.760].................[0.745] .720 in ET6
MCH/DRAM Reference ****Don’t Have****
ICH I/O            [1.550].................[1.550]
ICH Core           [1.100].................[1.100]

DRAM Voltage       [1.500].................[1.900]
DRAM Termination   [0.750].................[Auto]
Channel A Ref ****Don’t Have****
Channel B Ref ****Don’t Have****