Quote Originally Posted by Jor3lBR View Post
@Hoss: Very nice 24/7 settings Hoss!

Do you mind posting your everest mem scores and please post some Templates there are like 2 DDR3 board templates in the entire thread


I got the board but is true they don't work at all with D9GTR's. No matter volts. skews, ref's, clt, cmd etc they don't brake the 1600Mhz barrier Memtest #5 errors in 10 passes is the issue...

So far for people thinking of getting this DDR3 board get either Elpida Hyper or D9JNM IC's for ram.
What settings have you been using to try getting above 1600? I not sure if its the ddr3 or just this board but its hungry for mch voltage, well compared to my ddr2 board, especially at high clocks. So far it doesnt seem to like or need any cpu or mch skew, ive played a little with v-dimm skew but it doesnt seem to help any. It does seem to be rather picky or less forgiving with the references so make sure you get them right on.

average bandwidth run


Code:
******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Auto     ]
CPU Clock Ratio.................................[ 9        ]
Fine CPU Clock Ratio............................[ + 0.0    ]
CPU Frequency 4.5GHz............................[ 500 x 9.0]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 500      ]
PCI Express Frequency (Mhz).....................[ 101      ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 800mv   ]
PCI Express Clock Drive.........................[ 900mv   ]
CPU Clock Skew..................................[ 0ps     ]
MCH Clock Skew..................................[ 0ps     ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
(G) MCH Frequency Latch.........................[ 333      ]
System Memory Multipler.........................[ 3.20B    ]
Memory Frequency 1066...........................[ 1600     ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 6       ]
tRCD............................................[ 6       ]
tRP.............................................[ 6       ]
tRAS............................................[ 18      ]
 
******Advanced Timing Control******
 
tRRD[4].........................................[ 4       ]
tWTR[4].........................................[ 4       ]
tWR[8]..........................................[ 8       ]
tRFC[60]........................................[ 62      ]
tRTP[4].........................................[ 4       ]
Command Rate (cmd)[0]...........................[ Auto    ]
 
******Channel A Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 8       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 9 ] ................[ 9       ]
tWR 2wr (Differnt Rank)   [ 7 ] ................[ 8       ]
tWR 2rd (Differnt Rank)   [ 9 ] ................[ 9       ]
tRD 2wr (Same/Difft Rank) [ 7 ] ................[ 8       ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Leveling..............................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel A Driving Settings****** 
 
Drive Strength Profile..........................[ Auto    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Channel B Timing Settings******     
 
Static tRead Value        [ 8 ] ................[ 8       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 9 ] ................[ 9       ]
tWR 2wr (Differnt Rank)   [ 7 ] ................[ 8       ]
tWR 2rd (Differnt Rank)   [ 9 ] ................[ 9       ]
tRD 2wr (Same/Difft Rank) [ 7 ] ................[ 8       ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Leveling..............................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel B Driving Settings****** 
 
Drive Strength Profile..........................[ Auto    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.15    ]...................[ 1.38175 ]
CPU Termination   [ 1.20    ]...................[ 1.360   ]
CPU PLL           [ 1.50    ]...................[ 1.500   ]
CPU Reference     [ 0.760   ]...................[ 0.916   ]
 
MCH Core          [ 1.100   ]...................[ 1.460   ]
MCH Reference     [ 0.760   ]...................[ 0.861   ]
MCH/DRAM Refernce [ 0.750   ]...................[ 0.830   ]
ICH I/O           [ 1.500   ]...................[ 1.500   ]
ICH Core          [ 1.100   ]...................[ 1.100   ]
 
DRAM Voltage      [ 1.500   ]...................[ 1.660   ]
DRAM Termination  [ 0.750   ]...................[ 0.830   ]
Ch-A Data Ref     [ 0.750   ]...................[ 0.830   ]
Ch-B Data Ref     [ 0.750   ]...................[ 0.830   ]
Ch-A Addr Ref     [ 0.750   ]...................[ 0.830   ]
Ch-B Addr Ref     [ 0.750   ]...................[ 0.830   ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]
First go around at some higher speed runs and broke into the 9:20s. Ill try for some more higher speed stuff tonight for a better template.