Another way to do the internal USB cables is to remove the connector - you will probably break the little tabs, so best to have some spare ones on hand, and just make note of how the wires are lined up. The larger heat shrink will fit over the connector to finish it off.
If you are just a little bit careful nothing will break.
Just lift the little piece of plastik with a needle and pull the Pin out (without violance)
Last edited by Xien16; 12-20-2009 at 11:24 AM.
Damn, we are snowed in here in Munich:
I heard the east coast of the States is in frosty-mode too. Brrrrrr ... back to bed
great pics. yeah us here on the east coast got slammed with snow. about 2 feet where im at.
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
Yeah winter struck hard, it's about half a meter of snow and 20 below outside.
Fractal Design Array mITX
LC Worklog: Project Purple Haze
LianLi V1000
LC Worklog: Project Crystal Clear
LianLi A05
LC Worklog: Project Simplicity
Even The UK has Lots of snow. Great shots Laine
The best time of year here in Arizona. Live it up!Originally Posted by dualbrain
Damn, we are snowed in here in Munich:
I heard the east coast of the States is in frosty-mode too. Brrrrrr ... back to bed
I'm in love with the white, can't wait to post up my work.
I wanted to sleeve the front panel audio cable but it have two connectors, Azalia "the one i need" and AC'97. Can i cut the AC'97 off ?
Intel i7 2600k, Asus p8p67 EVO, Thermalright Archon, G.Skill RipjawsX 8GB, Asus EAH6970 DCII, Corsair AX850W, Asus xonar essence ST, Coolermaster HAF 932,
Crucial C300 128GB, WD Caviar Black 1 TB, Samsung F3 1TB.
The world needs your support.
Join The XS WCG team and help cure Cancer, AIDS, and other diseases.
cut it off, you donīt need it
You need a sleeved PSU or someone who sleeves your PSU ?
Send me a PM
Only if you don't ever plan on using old mother boards or audio cards in this case.
While not computer related....
BrendanDone for a friend...reposted from Head-Fi.
I BLEED TOXIC GREEN
Thats some nice work...
Perfectly done cyberspyder! I guess no manufacturer could do it better
[SIGPIC][/SIGPIC]
Yep those are them... My case comes with 4 USB 2.0 connectors on the top of the case. I was able to sleeve the cable. It was a little hard getting the SATA sleeve (free sample in my order! Thanks Nils?) over the double connector, but I was able too do it.
I managed to sleeve double wired USB internal without removing connector with USB sleeve (smaller than SATA) and SATA heatshrink, it was tight but possiblesleeving is a bit transparent though
Last edited by aka_GK; 12-22-2009 at 12:29 AM.
Worklog: Project Black Copper
Lian Li PC-P80 | Thermochill PA140.3 | Noiseblocker fans | mdpc-x stuff
You need a sleeved PSU or someone who sleeves your PSU ?
Send me a PM
akgk - then use SATA
@ferhan: Nice towel!!!
Itīs the towel of death !!!!!!!!!!!!
You need a sleeved PSU or someone who sleeves your PSU ?
Send me a PM
Ferhan is the best friend of the devil
The Hitchhiker's Guide to the Galaxy
has anyone sleeved any thermaltake toughpower psu's? those wires do not want to come out. some come out easy, some dont want to come out at all, not rip off the connector and some come out with one of the side pins bent back then break off when bending it back into place. i'm using the mdpc molex remover tool, ive tried 2 needles with no luck. luckily it was a spare cable now i'm afraid to do any of the main ones
@illidan: Also thought of that when i first read the post
[SIGPIC][/SIGPIC]
I sleeved toughpower using staples with no serious complaints (as far as it possible having no special tool
now I have molex tool and it works like a charm, yours should work too
Last edited by aka_GK; 12-23-2009 at 05:14 AM.
Worklog: Project Black Copper
Lian Li PC-P80 | Thermochill PA140.3 | Noiseblocker fans | mdpc-x stuff
i havent tried staples yet, but some wires come out easy and some dont want to come out. this was on a pci-e cable. and like i said before sometimes it would come out but one of the little side pins would be bent out then bending them back snapped them off. i really hope i dont have problems with the 24pin if i screw that one up it wont be goodI sleeved toughpower using staples with no serious complaints (as far as it possible having no special tool
now I have molex tool and it works like a charm, yours should work too
Cyberspyder, that one hell of a knife mate.
Can you tell me how you melted the heat shrink in to a Y, looks very sweet!
Posting Permissions
Reply With Quote
Bookmarks