Liquid Cooling Case Gallery

[Erklat]

This is my absolute favorite

What additive you used to get that great water tint? Bought or homemade?

[Zeus]

My bet is pentosin, that gives exactly that color.

[TadZilla]

Here are some pics of my first ever WC rig. Cable management isn't very nice, but I think it its fairly clean for a WC'ed A05B...






I've since stripped the rig of its WC components and sold it as an air-cooled rig.

-TadZilla

[Schlingel]

This is my absolute favorite

What additive you used to get that great water tint? Bought or homemade?

BASF G48 normally used for cars mixed with demineralized water.

For more blue colour I prepared a new mixture with more G48. Will try it later Hopefully the water gets deeper blue this way.

[oblivion.sky]

MY SCARLET.... build log on OCN

[AH64]

My first watercooling build

mcp355
xspc top
swiftech mcr320
apogee xt
danger den t-fitting
danger den fillport
primochill flex pro 3/8, 5/8, 1/8 (id,od,wall)

distilled + pt_nuke









More can be seen here:

http://www.flickr.com/photos/deafman...7622799531115/

[nipper575]

Looks good, it's nice to see people not afraid to take to their towers with a dremel. Can make fitting an entire WC loop internally look much, much neater.

[triggs75]

Nice build


Chad

[nullface]

sweet case!! What size rad is that?

Looks like a TJ08 with inverted internals.

[Blah123]

Thx LogAn'sRun and Malik
100 points nullface. Its a Silverstone TJ08 inverted ATX Case.

Second GTX missing

[Anemic]

Blah123, that is a really sweet looking build! Love the colors, very clean look.

[terrornoize]

http://www.flickr.com/photos/2684528...7622790042711/

[Alec**]

Hey XS, OK so I've been around for a while (although hardly any posts), mainly looking at the Watercooled and Case Mods section, and thought I should upload pics of my Rig.

This was a few months ago, in a month or 2 I'm planning of upgrading to a i7 set-up, and would love to hear people opinions / suggestions on what I can improve on. Thanks guys

Current Specs:
Core 2 Quad Q6600, nVidia 8800GTX, Asus P5K-E, Corsair XMS 2, 500GB & 200GB WDC HDD, Epsilon 700w, Thermaltake Soprano FX, Windows 7 HP.











http://img100.imageshack.us/img100/4813/mg3069.jpg

[noob eater4726]

Tell me if these are too big, I'll resize them.

[aka_GK]

hey noob, that is not a noob work at all! great rig

[ShArKo]

nice rig noob eater4726!!! Congratulation!!!!

[kwscore]

[Zeus]

Noob eater, what power button is that? I like it! Nice build too.

[bundymania]

an older rig from my collection, that i´ve build in 2007 for my girlfriend

[Erklat]

Hey XS, OK so I've been around for a while (although hardly any posts), mainly looking at the Watercooled and Case Mods section, and thought I should upload pics of my Rig.

This was a few months ago, in a month or 2 I'm planning of upgrading to a i7 set-up, and would love to hear people opinions / suggestions on what I can improve on. Thanks guys

Where's your PSU?

Pretty good job given the fact that Soprano is crappy cramped case with next to no space when HDD and PSU are in their places.

Your graphics is pretty bended too.

[Alec**]

Where's your PSU?

Pretty good job given the fact that Soprano is crappy cramped case with next to no space when HDD and PSU are in their places.

Your graphics is pretty bended too.

The PSU is in the op-back (standard place) but on it's side so you can fit a HDD cadge in there too.

Yeah, it is far from the best for watercooling in terms of layout but it was quite pleasing how well we managed to fit the Rad, pump and Res.

And indeed the GPU is bent a bit on the end, like that since new. But sent it back to nVidia originally and they tested it and said it runs fine and it's been working all the time without any probs so all ok

Thanks for the interest, zile

[Erklat]

The PSU is in the op-back (standard place) but on it's side so you can fit a HDD cadge in there too.

Could you post the picture of this, please?

Yeah, it is far from the best for watercooling in terms of layout but it was quite pleasing how well we managed to fit the Rad, pump and Res.

I changed Soprano for Chieftec LCX, which is quite larger, and still I have worse loop arangement than you do.

Will get to work when mobo and ram arrive

BTW, tint is great. Which additive you use?

[PilatuS]

It's been a while since i last posted my PC. So here it is again. No big changes, just the new HD5850 GPU with EK waterblock.

[Alec**]

Could you post the picture of this, please?

BTW, tint is great. Which additive you use?

Feser One Cooling Fluid (Not UV) and case lighting, 2 blue LED tubes, which I think makes a fair bit of difference.

Thanks again

[JoeBar]

^^

I used to own this case years ago. If u remove this cage your psu will breath and eventually perform better...