Cable Sleeving Guide

[DarthBeavis]

A present for my project made possible by MDPC!!

Love the demotivational poster look of ur pics!!!!

[BlaZ1n.IVXX]

I started sleaving my Ultra X3 psu. I started with pin 24. One end has two wires to the same plug. The other end has a wire in pin 17 and 24. What end gets what? I would think the two wire pin would go to pin 24 on the psu end and 17 and 24 on the board end. But I don't want to screw this up. To make it worse all the wires are black. LOL

[DarthBeavis]

I started sleaving my Ultra X3 psu. I started with pin 24. One end has two wires to the same plug. The other end has a wire in pin 17 and 24. What end gets what? I would think the two wire pin would go to pin 24 on the psu end and 17 and 24 on the board end. But I don't want to screw this up. To make it worse all the wires are black. LOL

I am sorry, your post is unreadable. I keep trying but all I see is thong thong thong.

[BlaZ1n.IVXX]

I am sorry, your post is unreadable. I keep trying but all I see is thong thong thong.

Im sorry thank my wife for that.

Well I am about done sleeving the rest of the 24 pin. I guess I have a 50/50 shot at getting the correct. If not I guess it's time for a new board. lol

I did call Ultra and ask them about it. Gess how much help they are. I did find out that my warranty was shot. Thats cool.

[DarthBeavis]

Im sorry thank my wife for that.

Well I am about done sleeving the rest of the 24 pin. I guess I have a 50/50 shot at getting the correct. If not I guess it's time for a new board. lol

Fixed:

If you are going to sleeve PSUS you need to invest in a PSU tester.

[BlaZ1n.IVXX]

Fixed:

If you are going to sleeve PSUS you need to invest in a PSU tester.

Did you just sleve the thong? That gives me an idea. A very very very bad idea. Thank you.

I do have a psu tester. It's called smoke or no smoke. I am Xtreme baby.

[fhantastic]

Ill be taking apart my PC again later this week so i will make a pic for you m8.

thank you

[ScorpioSnake]

Some nice looking sleeving going on here! New to the site, and I'll be posting pics of my build soon.

BTW, Thank you Nils for the bit of black sleeving you included in my recent order! And you were correct in deciphering my identity...

[dualbrain]

Oh - welcome to XS

[kgtiger]

Nils, I think this man need a day off work, take him to the zoo or a lake so he can feed the ducks or something, soon!

Hay Nils I am really glad you found a way to give fhantastic some time off, the man really needed it.
However I didn't really understand fhantastic last photo, he seamed a bit bent out of shape, you know, it's like he wants to kill something.
I thought a brake from work, a day off, just some time to loosen the sleeving so to speek would have done the man a world of good.

But then, I looked at this,

I must say Nils, I felt a little un-settled, like something had pushed him to far, you know what I mean, like something had just frayed his sleeving.

But then, I found out why his sleeving was in such a knot.
After looking at fhantastics home video from his day off.
I mean, hell this would be enough to break any mans pin remover.

Thanks for the link Nils, I sure after looking at this everyone will understand the challenges fhantastic has endured and will be sympathetic to his needs.

I did as you recommend: http://www.youtube.com/watch?v=lW_mw75QCXQ

I know you did mate, all we can do now is hope that his heat shrink has a firm grip on his sleeving.
Only time will tell.
Just keep a close eye on him for us will you.
Thanks mate.

[Xien16]

...all we can do now is hope that his heat shrink has a firm grip on his sleeving...

With such "long" shrinks no problem...

[Laine]

I'm out of left overs too now.
Lucky it's only for my temporary build.

[mcp]

[andy2kfi]

Some results, but still not finished. Need one more sleeve-kit
Also, waiting for new lense for my camera, because that one was dropped and focus won't work well, sometimes.



PSU cables + fans cables in case require more then one sleeve kit, so i'll place another order soon.



My small 22cm PSU (reallly silent, even under load)



SATA sleeve + small sleeve used for split every 2 FAN cables .



MDPC-X clips are really top Thanks Nils



SATA, HDD led, Power led, etc...



24 pin cable, 6+8 VGA, actually as you can see I've used large heatshrink over 8pin VGA, the reason is doubled cable in one pin. Also, silver sleeve looks ugly here a bit , so i'll re-sleeve it when receive black again.







Nils, I need mooore Also thank you for "demo" cut off of grand blue small sleeve. It's looks really good, much better than silver (as you can see it used)!
(color of grand blue small sleeve on the pics above are really different from live, sure it can be fixed in Photoshop, but I'll make all pics again when receive new lense )

[fhantastic]

and action

[aka_GK]

and action

Whaat da F?!?? Is there huge 999-pin ATX power connector at the end??

[fhantastic]

nooo its only sleeve

[kwscore]

fhantastic last photo roxxxxxx really nice

[melle.k]

really nice photo's andy2kfi but can you show the back off the motherboard tray when you mounted it in the case. I am really curious about how you will rout the 24 pin through the case
keep up the good work

[TadZilla]

Um... fhantastic? I think the sleeving is eating your motherboard... might wanna stop it

Great pics by the way!

-TadZilla

[fhantastic]

the sleeve tsunami will destroy everything

[Petrucci_M3]

Got a question, and I'm sure someone here can help. I'm trying to purchase some sleeving from from MDPC and I can't get the price to change from EURO. Maybe I'm a little confused, but do we just convert and calculate how much we send through paypal or do they have to change something in my account for me to see the "correct" price. Thanks!

[fhantastic]

paypal will calculate it for you

[aka_GK]

Petrucci, I am not sure I understood your question correct, but shop makes request to PayPal for charge in euros and then PayPal charges your card in currency of your card using PayPal conversion rates or your bank conversion rates (I have this options in PP account).

Hope this is what you are asking

[TadZilla]

the sleeve tsunami will destroy everything

Forget asteroids, crazy weather, or nuclear war... the world will end up be swallowed by MDPC Small Sleeving...