Due to my high vid chip needing 1.4v+ to be stable at 4.30GHz and above, i settled at 467x9 24/7. But i thought i should go for higher bandwidth so i dropped the multi to 8.5 and ramped up the FSB. Although i'm finding it hard to get anything stable above 485 FSB with this multi, i'm not sure whyanyone know? I'm pretty sure the RAM and CPU are stable, increasing VTT and MCH didn't help at all.
On another note, i started messing around with the 266 (A) strap. I get about ~400mb increase in read bandwidth over the 333strapIts quite hard to get anything above 467fsb stable with it, but i managed to boot higher. I went for max clock with super tight subtimings, strap and PL. Check this :
Needed about 1.50v MCH to get it to boot and do some benches though, and i had vdimm at 2.0v
Reply With Quote
Bookmarks